- Output Voltages from 1kV to 60kV
- Low Stored Energy
- Enable/Inhibit Control of Output
- OEM Customization Available
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
60W High Voltage Power Supplies
Spellman’s SMS Series of 60 watt high voltage power supplies are based on a proprietary resonant fly back power conversion topology that provides over 80% efficiency. These fixed polarity modules (specify positive or negative at time of order) feature both voltage and current regulation with automatic crossover, making them ideal for sensitive load applications. The robust design of SMS Series along with comprehensive arc and short circuit protection allow operation in the most demanding environments.
- Hipot Testing
- Detector Arrays
- Cable Testing
(Ref. 128015-001 REV. P)
+24Vdc ±10% @ 4.0A
10 models from 1kV to 60kV. Positive or negative polarity outputs.
80 to 85%, typical
Load: 0.01% of output voltage no load to full load.
Line: ±0.01% for ±10% change in input voltage.
Load: 0.1% of output current from 0 to rated voltage.
Line: 0.05% of rated current over specified input range.
0.02% per 8 hours.
0.01% per °C, voltage or current regulated.
0.1% p-p of maximum output voltage.
Operating: 0°C to 40°C
Storage: -40°C to 85°C
0 to 90%, non-condensing
3.H x 5.W x 9.D (7.6cm x 12.7cm x 23.0cm).
5.25 pounds (2.38kg)
12 pin AMP Metri-Mate (mating connecter and pins provided)
18.±1. (45.7cm) of UL® approved high voltage wire
Front Panel Ground Connection:
Threaded 8-32 ground stud, nut provided
CCompliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. RoHS Compliant.
SMS SELECTION TABLE
|Maximum Rating||Model Number|
*Specify “P” for positive polarity or “N” for negative polarity.
CONNECTOR 12 PIN
|1||Power Ground||+24Vdc Return|
|2||+24Vdc Input||+24Vdc @ 3.5 amps, maximum|
|3||High Voltage Enable/Inhibit||Open = HV OFF, Ground = HV ON|
|4||Voltage Test Point||0 to 10Vdc = 0 to 100% of rated output|
|5||Current Test Point||0 to 10Vdc = 0 to 100% of rated output|
|6||Voltage Programming||0 to 10Vdc = 0 to 100% of rated output|
|7||Current Programming||0 to 10Vdc = 0 to 100% of rated outp|
|8||+10Vdc Reference||+10Vdc @ 1mA maximum|
|9||Signal Ground||Signal Ground|
Tables & Diagrams
Frequently Asked Questions
What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
What Kind of High Voltage Connector Do You Use on Your Supplies?
What Do You Mean That the Output Side of the High Voltage Cable on Most Standard Products Is “Unterminated”?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?