SERIE SMS

  • Voltaje de salida de 1 kV a 60 kV
  • Baja energía almacenada
  • Control de habilitar/inhibir salida
  • Personalización disponible para OEM

60W High Voltage Power Supplies

La serie SMS de fuentes de alimentación de alto voltaje de 60 W está basada en una topología propia de conversión de energía por transformador flyback resonante que proporciona una eficiencia mayor al 80%. Estos módulos de polaridad fija (que se especifican como positivos o negativos al momento de ordenarlos) cuentan con regulación de voltaje y corriente con cruce automático, haciéndolos ideales para aplicaciones de cargas sensibles. El diseño robusto de la serie SMS junto con su amplia protección contra arco y cortocircuito le permiten la operación en los ambientes más demandantes.

Aplicaciones típicas:

  • Electrohilado
  • Pruebas de potencial alto
  • Arreglos de detectores
  • Electroforesis
  • Prueba de cables

CE Marking

Especificaciones

(Ref. 128015-001 REV. M)

Input:

+24Vdc ±10%

Output:

10 models from 1kV to 60kV. Positive or negative polarity outputs.

Efficiency:

80 to 85%, typical

Voltage Regulation:

Load: 0.01% of output voltage no load to full load.

Line: ±0.01% for ±10% change in input voltage.

Current Regulation:

Load: 0.1% of output current from 0 to rated voltage.

Line: 0.05% of rated current over specified input range.

Stability:

0.02% per 8 hours.

Temperature Coefficient:

0.01% per °C, voltage or current regulated.

Ripple:

0.1% p-p of maximum output voltage.

Environmental: 

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

0 to 90%, non-condensing 

Dimensions:

 3.H x 5.W x 9.D (7.6cm x 12.7cm x 23.0cm).

Weight:

5.25 pounds (2.38kg)

Input Connector:

12 pin AMP Metri-Mate (mating connecter and pins provided)

Output Cable: 

18.±1. (45.7cm) of UL® approved high voltage wire

Front Panel Ground Connection:

Threaded 8-32 ground stud, nut provided

Regulatory Approvals:

CCompliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. RoHS Compliant.

SMS SELECTION TABLE

Maximum Rating Model Number
kV mA  
1 60 SMS 1*60
3 20 SMS 3*60
5 12 SMS 5*60
10 6 SMS 10*60
15 4 SMS 15*60
20 3 SMS 20*60
30 2 SMS 30*60
40 1.5 SMS 40*60
50 1.2 SMS 50*60
60 1.0 SMS 60*60

*Specify “P” for positive polarity or “N” for negative polarity. 

CONNECTOR 12 PIN

Pin Signal Parameters
1 Power Ground +24Vdc Return
2 +24Vdc Input +24Vdc @ 3.5 amps, maximum
3 High Voltage Enable/Inhibit Open = HV OFF, Ground = HV ON
4 Voltage Test Point 0 to 10Vdc = 0 to 100% of rated output
5 Current Test Point 0 to 10Vdc = 0 to 100% of rated output
6 Voltage Programming 0 to 10Vdc = 0 to 100% of rated output
7 Current Programming 0 to 10Vdc = 0 to 100% of rated outp
8 +10Vdc Reference +10Vdc @ 1mA maximum
9 Signal Ground Signal Ground
10 Spare No Connection
11 Spare No Connection
12 Spare No Connection

Tablas y Diagramas

DIMENSIONS: in.[mm]

SIDE VIEW

SMS High Voltage Power Supply (Image 2)

TOP VIEW

SMS High Voltage Power Supply (Image 3)

BACK VIEW

SMS High Voltage Power Supply (Image 4)

CE ROHS Marking

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.