SMSシリーズ

  • 出力電圧1kV 〜60kV
  • アーク及び短絡保護
  • 低蓄積エネルギ
  • 出力電流/電圧のテスト・ポイント
  • イネーブル/出力インビビット制御
  • OEM特注可能

60W 高圧電源

 スペルマンの60W高圧電源SMSシリーズは、共振フライバッ ク回路に基づいて構成されているので80%以上の効率と高パル ス電流を提供することができます。

この極性固定タイプモジュール(ご注文時に正または負をご指 定下さい。)は自動クロスオーバーで電圧と電流を制御し、高精度 アプリケーションに最適です。またアークと短絡保護を備 た設 計で過酷な環境下での動作を可能にします。

用途

  • 検出器
  • 電気泳動装置
  • 静電紡糸
  • Hi-Pot試験
  • ケーブル検査

CE Marking

Specifications

(Ref. 128015-001 REV. L)

Input:

+24Vdc ±10%

Output:

10 models from 1kV to 60kV. Positive or negative polarity outputs.

Efficiency:

80 to 85%, typical

Voltage Regulation:

Load: 0.01% of output voltage no load to full load.

Line: ±0.01% for ±10% change in input voltage.

Current Regulation:

Load: 0.1% of output current from 0 to rated voltage.

Line: 0.05% of rated current over specified input range.

Stability:

0.02% per 8 hours.

Temperature Coefficient:

0.01% per °C, voltage or current regulated.

Ripple:

0.1% p-p of maximum output voltage.

Environmental: 

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

0 to 90%, non-condensing 

Dimensions:

 3.H x 5.W x 9.D (7.6cm x 12.7cm x 23.0cm).

Weight:

5.25 pounds (2.38kg)

Input Connector:

12 pin AMP Metri-Mate (mating connecter and pins provided)

Output Cable: 

18.±1. (45.7cm) of UL® approved high voltage wire

Front Panel Ground Connection:

Threaded 8-32 ground stud, nut provided

Regulatory Approvals:

Compliant to 2004/108/EC, the EMC Directive and 2006/95/EC, the Low Voltage Directive; Installation Category II

SMS SELECTION TABLE

Maximum Rating Model Number
kV mA  
1 60 SMS 1*60
3 20 SMS 3*60
5 12 SMS 5*60
10 6 SMS 10*60
15 4 SMS 15*60
20 3 SMS 20*60
30 2 SMS 30*60
40 1.5 SMS 40*60
50 1.2 SMS 50*60
60 1.0 SMS 60*60

*Specify “P” for positive polarity or “N” for negative polarity. 

CONNECTOR 12 PIN

Pin Signal Parameters
1 Power Ground +24Vdc Return
2 +24Vdc Input +24Vdc @ 3.5 amps, maximum
3 High Voltage Enable/Inhibit Open = HV OFF, Ground = HV ON
4 Voltage Test Point 0 to 10Vdc = 0 to 100% of rated output
5 Current Test Point 0 to 10Vdc = 0 to 100% of rated output
6 Voltage Programming 0 to 10Vdc = 0 to 100% of rated output
7 Current Programming 0 to 10Vdc = 0 to 100% of rated outp
8 +10Vdc Reference +10Vdc @ 1mA maximum
9 Signal Ground Signal Ground
10 Spare No Connection
11 Spare No Connection
12 Spare No Connection

Tables & Diagrams

DIMENSIONS: in.[mm]

SIDE VIEW

SMSシリーズ 60W 高圧電源 (Image 2)

TOP VIEW

SMSシリーズ 60W 高圧電源 (Image 3)

BACK VIEW

SMSシリーズ 60W 高圧電源 (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.