XRB100N100 Monoblock® Series

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & Lightweight
Universal input, Power Factor Corrected with Internal EMI Filter
Can be Mounted in Any Physical Orientation
Analog Control Interface and Standard RS-232 Digital Interface

Spellman’s XRB100N100 Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 100kV at 100W. Features like universal input, small package size and a standard analog and RS-232 digital interface simplify integrating this Monoblock® into your X-Ray system. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical applications:

X-Ray Scanning: Food Inspection
Fill Level Confirmation
Security Applications

Specifications
Downloads

Specifications

^{(Ref. 128072-001 REV. L)}

X-Ray Characteristics:
Tube Type:
Stationary anode, tungsten target
Focal Spot:
0.5mm (IEC 336)
Beam Filter:
Lexan:
3.2mm
Oil:
10mm ±0.1mm
Glass:
1.8mm max
Beam Geometry:
Symmetrical fan 74° x 10° ±1°
Input Voltage:
Power factor corrected input 0.98, 100-240Vac ±10%
50/60Hz, 2A, maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between
40kV to 100kV
X-Ray Tube Current:
100uA to 1mA over specified tube voltage range
X-Ray Tube Power:
100W, maximum continuous
Voltage Regulation:
Line:
±0.1% of maximum output voltage over a
±10% change of nominal input line voltage
Load:
±0.1% of maximum rated voltage for 100uA to 1mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value
Voltage Risetime:
Ramp time shall be 1 second from 10% to 90% of maximum rated output voltage
Voltage Overshoot:
5% of maximum voltage, to return within 2.5% of maximum voltage in less than 50ms
Voltage Ripple:
0.5% peak to peak of maximum voltage for frequencies
≤
1kHz
Emission Current Parameters Current Regulation:
Line:
±0.5% of rated output current over a
±10% change of nominal input line voltage
Load:
±0.5% of rated output current for a change from 50% to 100% of rated output voltage
Current Accuracy:
Current measured through the X-Ray tube is within ±1% of the programmed value
Current Risetime:
Ramp time shall be 1 second from 10% to 90% of maximum rated current
Arc Intervention:
3 arcs in 10 seconds with a 200ms quench = Shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control

Downloads

Monoblock® Brochure

Subscribe to our high voltage newsletter

Subscribe to our high voltage newsletter, published quarterly with relevant information on high voltage power supply technology and applications.