戻る
以下の条件で製品を探す:
アプリケーション
戻る
アプリケーション別に製品を見る
すべてのアプリケーションを見る

XRB100N100 Monoblock®シリーズ

  • 一体型HV電源、フィラメント電源、X線管、ビームポートおよび制御電子回路
  • 小型軽量
  • ユニバーサル入力、内蔵EMIフィルターによる力率改善
  • あらゆる物理的方向に取付け可能
  • アナログ制御インターフェイスと標準RS-232デジタルインターフェイス

*注: すべての仕様は予告なく変更される場合があります。最新版についてはこのデータシートの英語PDFをご覧ください。

見積もりを取得

スペルマンのX線源Monoblock®XRB100シリーズは、OEMアプリケーション向けに設計されており、内部のX線管に100ワットで最大100kVまでの電力を供給します。ユニバーサル入力、小型パッケージ、標準アナログ、RS-232デジタル・インターフェースなどの機能により、XRB100をお客様のX線装置に容易に組み込むことが可能です。独自のエミッション制御回路はX線管電流の調整に優れており、際立った安定性を提供します。

用途

  • X線走査、食品検査、液体レベル確認およびセキュリティ
  • 仕様
  • ダウンロード

仕様

(Ref. 128072-001 REV. L)

  • X-Ray Characteristics:
  • Tube Type:
    Stationary anode, tungsten target
  • Focal Spot:
    0.5mm (IEC 336)
  • Beam Filter:
  • Lexan:
    3.2mm
  • Oil:
    10mm ±0.1mm
  • Glass:
    1.8mm max
  • Beam Geometry:
    Symmetrical fan 74° x 10° ±1°
  • Input Voltage:
    Power factor corrected input 0.98, 100-240Vac ±10%
    50/60Hz, 2A, maximum
  • X-Ray Tube Voltage:
    Nominal X-Ray tube voltage is adjustable between
    40kV to 100kV
  • X-Ray Tube Current:
    100uA to 1mA over specified tube voltage range
  • X-Ray Tube Power:
    100W, maximum continuous
  • Voltage Regulation:
  • Line:
    ±0.1% of maximum output voltage over a
    ±10% change of nominal input line voltage
  • Load:
    ±0.1% of maximum rated voltage for 100uA to 1mA load change
  • Voltage Accuracy:
    Voltage measured across the X-Ray tube is within ±2% of the programmed value
  • Voltage Risetime:
    Ramp time shall be 1 second from 10% to 90% of maximum rated output voltage
  • Voltage Overshoot:
    5% of maximum voltage, to return within 2.5% of maximum voltage in less than 50ms
  • Voltage Ripple:
    0.5% peak to peak of maximum voltage for frequencies

    1kHz
  • Emission Current Parameters Current Regulation:
  • Line:
    ±0.5% of rated output current over a
    ±10% change of nominal input line voltage
  • Load:
    ±0.5% of rated output current for a change from 50% to 100% of rated output voltage
  • Current Accuracy:
    Current measured through the X-Ray tube is within ±1% of the programmed value
  • Current Risetime:
    Ramp time shall be 1 second from 10% to 90% of maximum rated current
  • Arc Intervention:
    3 arcs in 10 seconds with a 200ms quench = Shutdown
  • Filament Configuration:
    Internal high frequency AC filament drive with closed loop filament emission control

ダウンロード