戻る
以下の条件で製品を探す:
アプリケーション
戻る
アプリケーション別に製品を見る
すべてのアプリケーションを見る

XRB180PN200 Monoblock®

  • 180kVで200W
  • X線管電流:0.5mA~1.1mA
  • 焦点距離 0.8 x 0.8mm (公称) (IEC60336)
  • 力率補正入力 0.98
  • 100Vac to 240Vac, ±10%

注:すべての仕様は予告なく変更されることがあります。最新の改訂版については、このデータシートの 英語版PDF を参照してください。

見積もりを取得

スペルマンのXRB180PN200は、最大180kV、200Wで動作する一体型X線源で、OEMユーザに重要な検査やスクリーニング・アプリケーション用のコンパクトなプラグアンドプレイMonoblockを提供します。25°の角度を持つ固定陽極X線管を搭載し、80°x 4°のファンビームを提供します。独自のエミッション制御回路により、X線管電流の優れた制御を実現し、業界をリードする線量安定性と画質を提供します。このコンパクトなモデルには、標準的なアナログとRS-232デジタル制御が付属しています。このプラットフォームは、特定のOEMシステム要件に合わせてカスタマイズすることができます。

代表的なアプリケーション

航空保安検査:受託手荷物/EDS、検問所車両検査、一般NDT、食品検査

  • 仕様
  • ダウンロード

仕様

(Ref. 128085-001 REV. A)

  • X-Ray Characteristics:
  • Tube Type:
    Stationary Anode, tungsten target
  • Focal Spot:
    0.8 x 0.8mm nominal (IEC60336)
  • Beam Filter:
    Consists of oil and the curved Ultem 0.079'' +/-0.01''. Inherent filtration in the X-Ray Tube is 1mm Be, 1.5mm +/-10% glass.
  • Beam Geometry:
    Fan of 80° X 4°, ±1%
  • Anode Angle:
    25°
  • Input Voltage:
    Power factor corrected input to 0.98. 100Vac to 240Vac, ±10%, 50/60 Hertz. 5A, maximum
  • X-Ray Tube Voltage:
    Nominal X-Ray tube voltage is adjustable between 90kV to 180kV.
  • Voltage Accuracy:
    The high voltage measured at the X-ray tube will be within ±1% of the selected value.
  • Voltage Ripple:
    Ripple will be ≤0.2% of maximum rated voltage for frequencies ≤1kHz
  • Voltage Regulation:
    < ±0.1% for ±10% of nominal input line change
    < ±0.1% for 0.5mA to 1.11mA load change
  • Voltage Overshoot:
    kV overshoot will return within 5% of full voltage in less than 10ms
  • Risetime:
    The voltage and current risetime is controlled by a ramping circuit. Ramp time is less than 0.5 second from 10% to 90% of output voltage and current.
  • X-Ray Tube Current:
    0.5mA to 1.1mA @ 180kV, 200 Watts maximum
  • Current Accuracy:
    <±1% of the selected value.
  • Current Regulation:
    <0.5% at 90-180kV, 0.5mA to 1.1mA
  • Arc Intervention:
    Unit will detect a single arc but HV will not shut down. If multiple arcs occur (4 in 10 seconds) then the unit will shut down.
  • Filament Configuration:
    Internal high frequency AC filament drive operated in current mode with closed loop filament emission control.

ダウンロード