XRB180PN200 Monoblock®
- 180kV y 200W
- Corriente de Tubo de rayos X: 0.5mA a 1.1mA
- Punto focal 0.8 x 0.8mm nominal (IEC60336)
- Entrada corregida del factor de potencia a 0.98
- 100Vac a 240Vac, ±10%
*Nota: Todas las especificaciones están sujetas a cambios sin previo aviso. Consulte la versión PDF en inglés de esta hoja de datos para obtener la revisión más actualizada.
El XRB180PN200 de Spellman es una fuente de rayos X integrada que opera hasta 180kV y 200W, proporcionando a los usuarios OEM un Monoblock compacto plug-and-play para aplicaciones críticas de inspección y cribado. La unidad incorpora un tubo de rayos X de ánodo estacionario de ángulo de 25° que ofrece un haz de ventilador de 80°x 4°. Los circuitos de control de emisiones patentados proporcionan una excelente regulación de la corriente del tubo de rayos X, con una estabilidad de dosis y calidad de imagen líderes en la industria. Este modelo compacto viene con control analógico estándar y digital RS-232. Spellman puede proporcionar versiones personalizadas de esta plataforma para requisitos específicos del sistema OEM. APLICACIONES TÍPICAS Control de seguridad de la aviación: equipaje registrado/EDS, inspección de vehículos en puntos de control, Pruebas No Destructivas general, inspección de alimentos.
TYPICAL APPLICATIONS
Aviation Security Screening: Checked Baggage/EDS, Checkpoint Vehicle Inspection, General NDT, Food Inspection
- Especificaciones
- Descargas
Especificaciones
(Ref. 128085-001 REV. A)
- X-Ray Characteristics:
- Tube Type:
Stationary Anode, tungsten target - Focal Spot:
0.8 x 0.8mm nominal (IEC60336) - Beam Filter:
Consists of oil and the curved Ultem 0.079'' +/-0.01''. Inherent filtration in the X-Ray Tube is 1mm Be, 1.5mm +/-10% glass. - Beam Geometry:
Fan of 80° X 4°, ±1% - Anode Angle:
25° - Input Voltage:
Power factor corrected input to 0.98. 100Vac to 240Vac, ±10%, 50/60 Hertz. 5A, maximum - X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 90kV to 180kV. - Voltage Accuracy:
The high voltage measured at the X-ray tube will be within ±1% of the selected value. - Voltage Ripple:
Ripple will be ≤0.2% of maximum rated voltage for frequencies ≤1kHz - Voltage Regulation:
< ±0.1% for ±10% of nominal input line change
< ±0.1% for 0.5mA to 1.11mA load change - Voltage Overshoot:
kV overshoot will return within 5% of full voltage in less than 10ms - Risetime:
The voltage and current risetime is controlled by a ramping circuit. Ramp time is less than 0.5 second from 10% to 90% of output voltage and current. - X-Ray Tube Current:
0.5mA to 1.1mA @ 180kV, 200 Watts maximum - Current Accuracy:
<±1% of the selected value. - Current Regulation:
<0.5% at 90-180kV, 0.5mA to 1.1mA - Arc Intervention:
Unit will detect a single arc but HV will not shut down. If multiple arcs occur (4 in 10 seconds) then the unit will shut down. - Filament Configuration:
Internal high frequency AC filament drive operated in current mode with closed loop filament emission control.
Descargas
Suscríbase a nuestro boletín informativo de alto voltaje
Suscríbase a nuestro boletín informativo sobre alta tensión, que se publica trimestralmente con información relevante sobre tecnología y aplicaciones de fuentes de alimentación de alta tensión.