CCM1KW

  • コンパクト&軽量パッケージ
  • ユニバーサル/力率改善入力
  • 低コスト・モジュラーOEMプラットフォーム
  • 優れた共鳴ソフトスイッチングインバータトポロジー
  • RoHS対応
  • UL/CUL

1kW コンデンサ充電モジュール

CCM1KWコンデンサ充電モジュールは、4000Vまでの出力 電圧のもとで1秒あたり最大1000ジュールを供給すべく設計さ れました。力率改善AC入力、小パッケージ・サイズ、広範囲の アナログ・インターフェースにて、本製品はお客様のOEM装置 設計への統合が簡単です。正負極いずれにも対応可能な本 CCM1KW製品は完全にアーク、オープン、短絡モードから保護 されてい す。

用途

  • 治療および滅菌用紫外線光源
  • 業務および医療用レーザ・アプリケーション

Specifications

(Ref. 128103-001 REV. F)

Input Voltage:

90-264 Vac, 47-63 Hertz, power factor corrected input =0.98

Input Current:

14 Amps worst case, 1000 Joules per second

7 Amps worst case, 500 Joules per second

Efficiency:

>85%

Output Power:

1000 Joules per second, 500 Joules per second

Output Voltage:

0-1kV, 0-2kV and 0-4kV version available

Output Polarity:

Positive or negative, specify at time of order

Stored Energy:

Less than 0.2 Joules

Pulse to Pulse Repeatability:

±0.2% up to 1kHz

Temperature Coefficient:

≤ 100ppm per degree C

Fault Diagnostic System:

Over Temperature and Over Voltage Over Voltage Fault is latched requiring AC power recycle to clear. Over Temperature Fault is latched but can be cleared via inhibit/fault reset line.

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90% RH, non-condensing

Cooling:

Forced air

Input Line Connector:

2 position Phoenix MSTB connector, straight and right angle mating connector provided

HV Output Connector:

Standard: Kings/Winchester Electronics SHV 1707-1

Optional: Amphenol MHV UG-931/U

Interface-A Connector:

15 pin D, female

Interface-B Connector:

4 pin male Molex 705530038

Ground Stud:

10-32, nut supplied

Dimensions:

3. H X 6. W X 9. D (76.2mm x 152.4mm x 228.6mm)

Mounting:

M4 screw. Max. depth is 0.188. (4.78mm)

Weight:

6.9lb. (3.13kgs)

Regulatory Approvals:

Compliant to 2004/108/EC, The EMC Directive and 2006/95/EC, The Low Voltage Directive, approval pending. Compliant to 2002/95/EC, RoHS. Compliant to EN60601-1 UL/CUL recognized, File 242584

AC INPUT–2 POSITION TERMINAL BLOCK

Pin Signal Signal Parameters
1 AC Input High/Phase 1 Line Hot/Phase 1
2 AC Input Low/Phase 2 Line Neutral/Phase 2

ANALOG INTERFACE A— 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Inhibit/Fault Reset Ground = HV Enable, Open/+15Vdc = HV Inhibit
2 N/C N/C
3 OverTemp Fault No OT Fault = +15Vdc @ 3mA, OT Fault = Ground
4 Signal Ground Signal Ground (optional)*
5 Voltage Program 0 to 10Vdc = 0 to 100% rated output voltage
6 Overvoltage Status No OVP = +15Vdc @ 3mA, OVP Fault = Ground
7 Peak Hold Monitor Peak output voltage displayed, 0 to 10Vdc = 0 to 100% rated output voltage with a 5 second time constant
8 Voltage Monitor 0 to 10Vdc = 0 to 100% rated output voltage, ±1%
9 +15Vdc +15Vdc @ 150mA, maximum**
10 N/C N/C
11 +15Vdc +15Vdc @ 150mA, maximum (optional)**
12 Signal Ground Signal Ground (optional)*
13 End of Charge Charging = +15Vdc @ 1.5mA, End of Charge = Ground
14 Signal Ground Signal Ground
15 Signal Ground Signal Ground

Note: Output status signals are NMOS transistor controlled, 100mA maximum sink current. Actual signals are 5kΩpull ups to the internal +15Vdc logic source.

*Optional interface signals can be provided to be compatable with other pre-existing legacy interfaces. On standard units these signals are N/C.

**+15Vdc ±10% is provided on the standard unit. Optional +12Vdc ±5%/100mA, maximum can be provided.

INTERFACE B–4 PIN MALE D HEADER

Pin Signal Signal Parameters
1 Inhibit/Fault Reset Ground = HV Enable, Open/+15Vdc = HV Inhibit
2 Signal Ground Signal Ground
3 Voltage Program 0 to 10Vdc = 0 to 100% rated output voltage
4 +15Vdc +15Vdc @ 150mA, maximum (optional)*

CCM1KW SELECTION TABLE kV JOULES/SECOND

Model
kV Joules/Second  
1 500 CCM1*500
2 500 CCM2*500
4 500 CCM4*500
1 1000 CCM1*1000
2 1000 CCM2*1000
4 1000 CCM4*1000

*Specify P for positive or N for negative 500 J/s units have a single internal fan, 1000 J/s units have both an internal and external fan.

 

CCM1KW 1kW コンデンサ充電モジュール (Image 2)

Straight and right angle AC input mating connectors are provided

Tables & Diagrams

500 Joules per second

(unit with internal fan)

DIMENSIONS: in.[mm]

REAR VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 4)

FRONT VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 8) 

BOTTOM VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 9)

1000 Joules per second

(unit with internal and external fan)

DIMENSIONS: in.[mm]

REAR VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 4)

FRONT VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 3)

BOTTOM VIEW

CCM1KW 1kW コンデンサ充電モジュール (Image 5)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.