戻る
以下の条件で製品を探す:
アプリケーション
戻る
アプリケーション別に製品を見る
すべてのアプリケーションを見る

XRBe80PN300 Monoblock® シリーズ

  • 小型・軽量
  • ユニバーサル入力・力率補正
  • あらゆる方向に取り付け可能
  • アナログモニタリングインターフェース、標準RS-232デジタルインターフェース、イーサネット
  • データロギングとファームウエア制御によるX線管シーズニング

*注:すべての仕様は予告なく変更される場合があります。 最新版については、このデータシートの 英語版PDF を参照してください。

見積もりを取得

80KV/300W Be Window Monoblock®

スペルマンのXRBe80PN300ベリリウムウインドウMonoblock®X線源は、300Wの出力レベルで80kVのバイポーラX線管に電源を供給するOEMアプリケーション用に設計されています。ユニバーサル入力、コンパクトなパッケージサイズ、標準RS-232デジタルインターフェースなどの特長により、XRBe80PN300のX線システムへの統合が容易になります。円錐形のビーム形状もございます。独自のエミッション・コントロール回路により、X線管電流の優れたレギュレーションと優れた安定性を実現します。

代表的なアプリケーション

食品検査システム、充填レベル確認システム、セキュリティ・スキャニング・システム、工業用NDTシステム、厚さ/メッキ測定システム

  • 仕様
  • ダウンロード

仕様

(Ref. 128132-001 REV. C)

  • Options:
    ST-TE, RA-SE, RA-TE
    Cable Options (see page 3 of the data sheet)
  • X-Ray Characteristics:
  • Focal Spot:
    0.8mm (IEC 336) standard
  • Beam Filter:
    Be 0.8mm
  • Beam Geometry:
  • Cone:
    Standard. The beam angular coverage will be 40° with the beam plane perpendicular to the X-Ray tube axis
  • Input Voltage:
    100- 240Vac, ±10%, 50/60 Hertz, .98 power factor
  • Input Current:
    300W @ 6A
  • X-Ray Tube Voltage:
    Maximum 80kV
  • X-Ray Tube Current:
    Maximum 5mA
  • X-Ray Tube Power:
    300W
  • Voltage Regulation:
  • Line:
    Line:±0.05% of maximum output voltage over a ±10% change of nominal input line voltage
  • Load:
    ±0.1% of maximum rated voltage for 150uA to full rated load change
  • Voltage Accuracy:
    Voltage measured across the X-Ray tube is within ±2% of the programmed value
  • Voltage Risetime:
    Standard ramp time shall be <500ms from 10% to 90% of maximum rated output voltage
  • Voltage Ripple:
    0.5% peak to peak of maximum voltage forfrequencies ≤1kHz
  • X-Ray Tube Voltage:
    Maximum 80kV
    Emission Current Parameters
  • Current Regulation:
  • Line:
    ±0.05% of rated output current over a ±10% change of nominal input line voltage
  • Load:
    ±0.1% of rated output current for a change from 50% to 100% of rated output voltage
  • Current Risetime:
    Standard ramp time shall be <500ms from 10% to 90% of maximum rated current
  • Arc Intervention:
    4 arcs in 10 seconds with a 100ms quench/100ms re-ramp = Shutdown
  • Filament Configuration:
    Internal floating AC filament drive with closed loop filament emission control circuitry

ダウンロード