戻る
以下の条件で製品を探す:
アプリケーション
戻る
アプリケーション別に製品を見る
すべてのアプリケーションを見る

XRB160PN480/CT Monoblock®

  • 一体型HV電源、フィラメント電源、X線管、ビームポートおよび制御電子回路
  • 小型軽量
  • あらゆる物理的方向に取付け可能
  • 標準RS-232デジタルインターフェイス

*注: すべての仕様は予告なく変更される場合があります。最新版についてはこのデータシートの英語PDFをご覧ください。

Certifications & Compliance

見積もりを取得

160kV、480W X線源

スペルマンのX線源Monoblock® XRB160PN480/CTは、OEMアプリケーション向けに設計されており、内部のX線管に480ワットで最大160kVまでの電力を供給します。小型パッケージ、標準アナログ、RS-232デジタル・インターフェースなどの機能により、XRBをお客様のX線装置に容易に組み込むことが可能です。標準モデルは、ファンビームのビーム形状です。独自のエミッション制御回路はX線管電流の調整に優れており、際立った安定性を提供します。

典型的な用途:

  • X線スキャン: 食品検査
  • 充填レベル確認
  • セキュリティ用途
  • 仕様
  • ダウンロード

仕様

(Ref. 128083-001 REV. J)

  • X-Ray Characteristics:
  • Tube Type:
    Glass tube, Tungsten target, Be filter
  • Focal Spot:
    0.8mm x 0.8mm (IEC336)
  • Beam Filter:
    1.75mm of glass, 1mm of Al, and 10mm of oil
  • Beam Geometry:
    Symmetrical fan 105° ±3° x 4° ±1°
  • Input Voltage:
  • Monoblock®:
    100-240Vac ±10%, 50/60Hz, 6.5A max
  • Heat Dissipation Unit:
    24Vdc, 3A
  • X-Ray Tube Voltage:
    Nominal X-Ray tube voltage is adjustable between 20kV to 160kV
  • X-Ray Tube Current:
    0.3mA to 6mA over specified tube voltage range
  • X-Ray Tube Power:
    320W continuous, 480W peak
  • Voltage Regulation:
  • Line:
    ±0.1% for a ±10% input line change of nominal input line voltage
  • Load:
    ±0.1% for a 0.3mA to 6mA load change
  • Voltage Accuracy:
    Voltage measured across the X-Ray tube is within ±1% of the programmed value
  • Voltage Risetime:
    Ramp time shall be <1 second from 1% to 90% of rated output
  • Voltage Overshoot:
    Within 5% of rated voltage
  • Voltage Ripple:
    0.1% p p of rated voltage @ ≤1kHz
  • Current Regulation:
  • Line:
    ±0.5%
  • Load:
    ±0.5%
  • Current Accuracy:
    Current measured through the X-Ray tube is within ±1% of the programmed value
  • Current Risetime:
    <1 second from 1% to 90% of rated output
  • Arc Intervention:
    4 arcs in 10 seconds = Shutdown
  • Filament Configuration:
    Internal high frequency AC filament drive with closed loop filament emission control
  • Digital Interface:
    RS-232
  • Control Software:
    A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.
  • Interlock Signals:
    A hardware interlock functions in digital programming modes.
  • Operating Temperature:
    0°C to +40°C
  • Storage Temperature:
    -40°C to +70°C
  • Humidity:
    5% to 90% relative humidity, non-condensing
  • Cooling:
    Heat exchanger w/fan and oil pump, powered from AC
  • Input Line Connector:

ダウンロード