XRB200PN400 Monoblock® 工業用X線ジェネレーター
- 一体型HV電源、フィラメント電源、X線管、ビームポートおよび制御電子回路
- 小型軽量
- ユニバーサル入力、力率改善
- あらゆる物理的方向に取り付け可能
- アナログ監視と標準RS-232デジタルインターフェイス
*注: すべての仕様は予告なく変更される場合があります。最新版についてはこのデータシートの英語PDFをご覧ください。
200kV、400W X線源
スペルマンのX線源Monoblock® XRB200PN400は、OEMアプリケーション向けに設計されており、内部のX線管に400ワットで最大200kVまでの電力を供給します。ユニバーサル入力、小型パッケージ、標準アナログ、RS-232デジタル・インターフェースなどの機能により、XRBをお客様のX線装置に容易に組み込むことが可能です。標準モデルは、ファンビームのビーム形状です。独自のエミッション制御回路はX線管電流の調整に優れており、際立った安定性を提供します。
典型的な用途:
- X線スキャン: 食品検査
- 充填レベル確認
- セキュリティ用途
Specifications
(Ref. 128085-001 REV. H)
X-Ray Characteristics:
Tube Type: Glass tube, Tungsten target, Be filter
Focal Spot: 0.8mm X 0.5mm (IEC336)
Beam Filter: Glass 1.8mm, Oil 10mm, Aluminum 1mm
Beam Geometry: Symmetrical fan 85° x 10° ±1°
Input Voltage:
100Vac-240Vac ±10%, 50/60Hz, 6A maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 100kV to 200kV
X-Ray Tube Current:
0.5mA to 2mA over specified tube voltage range
X-Ray Tube Power:
400W maximum continuous (350W average without external forced air)
Voltage Regulation:
Line: ±0.1% for a ±10% input line change
Load: ±0.1% for a 0.5mA to 2mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±1% of the programmed value
Voltage Risetime:
<1 second from 10% to 90% of rated output
Voltage Overshoot:
5% in less than 100ms
Voltage Ripple:
≤ 0.2% p p of rated maximum voltage
Current Regulation:
Line: ±0.1% @ 100-200kV, 0.25mA to 2mA
Load: ±0.5% @ 100-200kV, 0.25mA to 2mA
Current Accuracy:
Current measured through the X-Ray tube is within ±1% of the programmed value
Current Risetime:
<1 second from 10% to 90% of rated output
Arc Intervention:
4 arcs in 10 seconds = shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Digital Interface:
RS-232 interface.
Control Software:
A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.
Interlock Signals:
A hardware interlock function is provided
Operating Temperature:
0°C to +40°C
Storage Temperature:
-40°C to +70°C
Humidity:
5% to 95% relative humidity, non-condensing
Cooling:
Heat exchanger w/fan and oil pump, powered from 24Vdc, 2A power supply (customer provided). External forced air cooling if needed to keep oil temperature below 55°C
Input Line Connector:
3 pin Phoenix Contact 1829167
Analog Interface Connector:
10 pin Phoenix Contact 1755503
Digital Interface Connector:
9 pin D connector, female
Grounding Point:
M5 ground stud provided on chassis
Dimensions:
See drawing
Weight:
148.0lbs (67.0kg)
Orientation:
Can be mounted in any orientation.
X-Ray Leakage:
Not to be greater than 5uSv/hr at 5cm outside the external surface.
AC INPUT POWER 3 PIN PHOENIX CONTACT
| Pin | Signal | Parameters |
|---|---|---|
| 1 | Line | Line |
| 2 | GND | Ground |
| 3 | Neutral | Neutral |
DC POWER FOR HEAT DISSIPATION UNIT 4 PIN AMP 206061-1 CONNECTOR
| Pin | Signal | Parameters |
|---|---|---|
| 1 | +24 | +24Vdc |
| 2 | RTN | Return |
| 3 | +24 | +24Vdc |
| 4 | RTN | Return |
ANALOG INTERFACE— 10 PIN PHOENIX CONTACT
| Pin | Signal | Parameters |
|---|---|---|
| 1 | X-Ray | +24Vdc = enable X-Ray |
| 2 | X-Ray Return | X-Ray Return |
| 3 | N/C | N/C |
| 4 | kV Monitor Output | 0 to 9Vdc = 0 to 100% Rated Voltage |
| 5 | SGND | Signal Ground |
| 6 | mA Monitor Output | 0 to 9Vdc = 0 to 100% Rated Current |
| 7 | Fault | Open Collector, Open = No Fault |
| 8 | Relay N/O | HV On, 50V @ 1A maximum |
| 9 | Relay Common | HV On, 50V @ 1A maximum |
| 10 | Relay N/C | HV On, 50V @ 1A maximum |
RS-232 DIGITAL INTERFACE— 9 PIN FEMALE D CONNECTOR
| Pin | Signal | Parameters |
|---|---|---|
| 1 | N/C | No Connection |
| 2 | Transmit Data | Conforms to E/A RS-232-C |
| 3 | Receive Data | Conforms to E/A RS-232-C |
| 4 | N/C | No Connection |
| 5 | SGND | Signal Ground |
| 6 | N/C | No Connection |
| 7 | N/C | No Connection |
| 8 | N/C | No Connection |
| 9 | N/C | No Connection |
Tables & Diagrams
DIMENSIONS: in.[mm]
FRONT VIEW
BACK VIEW
TOP VIEW
SIDE VIEW
