XRB80N100 Monoblock®
- Sistema integrado que incluye fuente de alta tensión, fuente de alimentación del filamento, tubo de rayos X, ventana de salida del haz y electrónica de control
- Compacto y ligero
- Entrada universal, con corrección del factor de potencia y filtro EMI interno
- Puede montarse en cualquier orientación física
- Interfaz de control analógico e interfaz digital estándar RS-232
Certifications & Compliance
80kV, 100W X-Ray Source
La fuente de rayos X Monoblock® XRB80N100 de Spellman está diseñada para aplicaciones OEM, alimentando su tubo de rayos X interno hasta 80 kV y 100 W. Características como la entrada universal, el tamaño compacto y las interfaces estándar (analógica y digital RS-232) simplifican la integración de esta unidad en su sistema de rayos X. El modelo XRB80N100 está disponible con geometrías de haz en abanico (estándar) o cónicas (opcional). Su circuito patentado de control de emisión proporciona una excelente regulación de la corriente del tubo de rayos X, así como una estabilidad excepcional.
Aplicaciones típicas de la fuente de rayos X integrada Monoblock® XRB80N100:
- Escaneo por rayos X: Densitometría ósea
- Medición de espesor
- Inspección de alimentos
- Verificación del nivel de llenado
- Inspección de paquetes
- Especificaciones
- Descargas
Especificaciones
(Ref. 128065-001 REV. Y)
- X-Ray Characteristics:
- Focal Spot:
0.5mm (IEC 336) - Beam Filter:
- Ultem:
3.30mm ±0.15mm - Oil:
8mm ±0.1mm - Glass:
1.8mm ±0.25mm - BE:
0.8mm - Beam Geometry:
- Fan:
Standard. The beam angular coverage will be 75° with the beam plane perpendicular to the X-Ray tube axis and 13° wide. - Cone:
Optional. 25° cone beam - Input Voltage:
Power factor corrected input 0.98, 100-240Vac ±10%
50/60Hz, 2A, maximum - X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable up to 80kV - X-Ray Tube Current:
150uA to 1.25mA over specified tube voltage range - X-Ray Tube Power:
100W, maximum continuous - Voltage Regulation:
- Line:
±0.05% of maximum output voltage over a ±10% change of nominal input line voltage - Load:
±0.1% of maximum rated voltage for 150uA to 1.25mA load change - Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value - Voltage Risetime:
- Standard:
Ramp time shall be 500ms from 10% to
90% of maximum rated output voltage - Optional:
5 seconds. Specify at time of order - Voltage Overshoot:
5% of maximum voltage, to return within 2.5% of
maximum voltage in less than 100ms - Voltage Ripple:
1% peak to peak of maximum voltage for
frequencies
≤
1kHz
Emission Current Parameters - Current Regulation:
- Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage - Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage - Current Accuracy:
Current measured through the X-Ray tube is within ±2% of the programmed value - Current Risetime:
- Standard:
Ramp time shall be 500ms from 10% to 90% of maximum rated current - Optional:
5 seconds. Specify at time of order - Arc Intervention:
3 arcs in 10 seconds with a 200ms quench = Shutdown - Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Suscríbase a nuestro boletín informativo de alto voltaje
Suscríbase a nuestro boletín informativo sobre alta tensión, que se publica trimestralmente con información relevante sobre tecnología y aplicaciones de fuentes de alimentación de alta tensión.