문의하기

XRB80N100 Monoblock®

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & Lightweight
Universal Input, Power Factor Corrected with Internal EMI Filter
Can be Mounted in Any Physical Orientation
Analog Control Interface and Standard RS-232 Digital Interface

Certifications & Compliance

80kV, 100W X-Ray Source

Spellman’s XRB80N100 Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 80kV at 100W. Features like universal input, small package size and a standard analog and RS-232 digital interface simplify integrating this unit into your X-Ray system. The XRB80N100 is available either with fan shaped (standard) or (optional) cone shaped beam geometries. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical XRB80N100 Monoblock® Integrated X-Ray Source applications:

X-Ray Scanning: Bone Densitometry
Thickness Measurement
Food Inspection
Fill Level Confirmation
Parcel Inspection

사양
다운로드

사양

^{(Ref. 128065-001 REV. Y)}

X-Ray Characteristics:
Focal Spot:
0.5mm (IEC 336)
Beam Filter:
Ultem:
3.30mm ±0.15mm
Oil:
8mm ±0.1mm
Glass:
1.8mm ±0.25mm
BE:
0.8mm
Beam Geometry:
Fan:
Standard. The beam angular coverage will be 75° with the beam plane perpendicular to the X-Ray tube axis and 13° wide.
Cone:
Optional. 25° cone beam
Input Voltage:
Power factor corrected input 0.98, 100-240Vac ±10%
50/60Hz, 2A, maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable up to 80kV
X-Ray Tube Current:
150uA to 1.25mA over specified tube voltage range
X-Ray Tube Power:
100W, maximum continuous
Voltage Regulation:
Line:
±0.05% of maximum output voltage over a ±10% change of nominal input line voltage
Load:
±0.1% of maximum rated voltage for 150uA to 1.25mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value
Voltage Risetime:
Standard:
Ramp time shall be 500ms from 10% to
90% of maximum rated output voltage
Optional:
5 seconds. Specify at time of order
Voltage Overshoot:
5% of maximum voltage, to return within 2.5% of
maximum voltage in less than 100ms
Voltage Ripple:
1% peak to peak of maximum voltage for
frequencies
≤
1kHz
Emission Current Parameters
Current Regulation:
Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage
Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage
Current Accuracy:
Current measured through the X-Ray tube is within ±2% of the programmed value
Current Risetime:
Standard:
Ramp time shall be 500ms from 10% to 90% of maximum rated current
Optional:
5 seconds. Specify at time of order
Arc Intervention:
3 arcs in 10 seconds with a 200ms quench = Shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control

다운로드

의료 영상 제품 브로슈어

Monoblock® Brochure

스펠만 고전압 뉴스레터를 구독하세요

분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.