(Ref. 128092-001 REV. L)
200-240Vac (±10%), single phase, 50Hz/60Hz
Minimum 35A service recommended for 5kW operation
External EMC Filter (Schaffner FN2070-36-08-36A) required to meet CE/EMC specifications – Not provided with the generator
Mains Contactor – Not provided within the generator. Customer is responsible for mains safety disconnection.
Output Voltage Range: 20kV to 40kV
Polarity: Positive, grounded cathode X-Ray tube
Accuracy: Within 1% of programmed values
Settling Time: <10ms
Ripple: ≤ 1%
Stability: ≤ 0.01% per 8 hours
Temperature Coefficient: ≤ 100ppm/°C
Output Current Range: 10mA to 200mA
Output Power: 5kW @ 0.1 second loading time
Within 2% of programmed values measured after mA rises to stable DC level
DC filament drive: self corrected filament preheat settings with closed loop emission control and smart learning algorithm
0-6 amps at a compliance of 5.5 volts, maximum
Dual Speed Starter:
High speed (180Hz) and low speed (60Hz) can be configured via the serial interface.
Boost and Brake capability provided.
High Voltage Connector:
60kV, Claymount CA-3 type or equivalent
Optional Communication Interface:
M5 ground stud provided on chassis
Operating: 10°C to 40°C
Storage: -40°C to 85°C
20% to 85% RH, non-condensing.
Convection cooled, no internal fans. Forced air cooling not required
9.38. H X 6.6. W X 12. D (237.5mm x 167.6mm x 304.8mm)
<22 pounds (10kg
Compliant to EMC:IEC 60601-1-2. UL/CUL recognized file E242584. RoHS compliant.
- 2 point/3 point exposure modes
- AEC/Smart AEC exposure modes
- Automatic filament current calibration
- Tube anode heat calculator
- User configurable tube library