MONOBLOCK® MMB125PN3.5

Suministro integrado de alto voltaje, suministro de filamento, tubo de rayos X, puerto de haz y electrónica de control
Compacto y ligero
<1 ms de tiempo de subida es ideal para extremidades
Diseñada específicamente para el OEM C-Arm

*Nota: Todas las especificaciones están sujetas a cambios sin previo aviso. Consulte la versión en inglés en PDFde esta hoja de datos para obtener la revisión más actualizada.

Certifications & Compliance

El monoblock médico MMB125PN3.5 de Spellman® con un tiempo de subida de 1 ms es ideal para extremidades, aplicaciones especializadas e imágenes vasculares. Beneficiándose por los más de 70 años de innovación de alto voltaje de Spellman con esta fuente de rayos X monoblock MMB125PN3.5® diseñada específicamente para el OEM C-arm. Nuestra tecnología avanzada y nuestra experiencia en diseño junto con nuestra profundidad de capacidades de fabricación posicionan a Spellman como la mejor elección para sus requisitos de Monoblock®.

La serie ULTRA-Fast MMB de Spellman utiliza nuestras tecnologías únicas que aumentan la calidad del haz de rayos X y reducen la dosis del paciente. La fluoroscopia pulsada mejora las imágenes de la anatomía densa y compleja para apoyar aún más el manejo de la dosis. Con un tiempo de subida de <1 ms, la serie MMB de Spellman es una de las más rápidas de la industria.

Especificaciones

Especificaciones

^{(Ref. 128143-001 REV. A)}

X-Ray Characteristics:

Focal Spot:
0.5mm for small focus
1.6mm for large focus

Target Angle: 16°
Target Material: Tungsten
Beam Filter: 0.8mm Al
X-Ray Leakage: Less than <1mGy/hour @ 1meter from tank surface.

Maximum Filament Current:
4.3A
Filament Inverter

Switching Frequency:
20kHz

Anode Heat Content:
35.5kJ
Maximum Anode

Heat Dissipation:
600W
Distance Between
Focal Spot to X-Ray

Output Window:
45mm
Input Power:

Input Voltage:
190-264Vac, single phase, 50/60 Hz

Continuous Current:
≤9A @ 600W, 220V

Peak Current:
≤34A @ 3500W, 220V
X-Ray Tube Voltage:

Operational Range:
40 to 125kV

kV Rise Time:
<1ms (from 10% to 90%)

Reproducibility:
≤0.05 per IEC60601-2-54

kV Ripple:
≤1%
kV Accuracy

Fluoroscopy:
±5%

kV Overshoot:
≤5%
X-Ray Tube Current:

Fluoro:
0.2mA to 6 mA (small focal spot)

Pulsed Fluoro:
0.5mA to 10 mA (small focal spot)

Radiography:
10mA to 40mA (large focal spot)

mA Accuracy:
±10%

Maximum Operating Conditions:
Continuous

Low Level Fluoro:
6 mA for 5 minutes
Continuous

High Level Fluoro:
10 mA for 2 minutes

Pulsed Fluoro:
0.5fps, 1fps, 2fps, 4fps, 8fps, 15fps,
25fps, 30fps for 2 minutes

Pulse on time:
the lower value of 40ms
or 50% duty cycle

Radiographic:
Single shot large focal spot,
0.1 seconds @ 3500 watts
Maximum Anode

Heat Dissipation:
600W

Average Power:
600W for 5 minutes

Tank Heat Content:
No less than 675kHU

Max. Cooling Rate:
150W
X-Ray Tube Current Protection:

Over Current (High mA):
Trip point is set at 15% over maximum rated current, or at 15% over programmed output current value for longer than 50ms.

Under Current (High mA):
Trip point is set at 15% under programmed output current value for longer than 50ms.

Over Current (Low mA):
Trip point is set at 20% over maximum rated current, or at 20% over programmed output current value for longer than 50ms.

Under Current (Low mA):
Trip point is set at 20% under programmed output current value for longer than 50ms.
X-Ray Tube Voltage Protection:

Over Voltage (High kV):
Trip point is when the kV output exceeds 137.5kV for more than 10ms or it set is at 10% over programmed output voltage value for longer than 30ms.

Under Voltage (Low kV):
Trip point is set at 10% under the programmed output voltage value for longer than 30ms.
X-Ray Tube Arc Protection:

Arc Intervention:
Unit will detect an Arc but HV will not be shut down, but if multiple arcs occur (4 arcs in 10 seconds) the unit will shut down.
Over Temperature Protection:

Over Temperature:
Over temperature of tank cover trip point shall be within 60°C ±5°C. Over temperature of tank oil trip point shall be set 65°C.
Operating Temperature:
0 to +40 ºC.
Storage Temperature:
-20 to +70 ºC
Altitude:
0 to 8000 feet (0 to 2438 meters)
Humidity:
5 to 95%, non-condensing.
Dimensions:

X-Ray Tank:
12.2” x 6.2” x 5.7” (310mm x 158mm x 145mm)

Controller:
14.9” x 10.6” x 3.2” (380mm x 270mm x 83mm)
Weight:

X-Ray Tank:
27.5 pounds (13kg)

Controller:
9.9 pounds (4.5kg)
Regulatory Approvals:

Designed to be compliant to:
IEC 60601-1:
2005+A

Medical electrical equipment Part 1:
General requirements for basic safety and essential performance.
IEC 60601-1-2

2007 Medical electrical equipment Part 1-2:
General requirements for basic safety and essential performance- Collateral standard: Electromagnetic compatibility—Requirements and tests.
IEC 60601-1-3

2008 Medical electrical equipment Part 1-3:
General requirements for basic safety and essential performance- Collateral standard: Radiation protection in diagnostic X-Ray equipment.
IEC 60601-2-54

2009 Medical electrical equipment Part 2:
Particular requirements for the basic safety and essential performance of X-Ray equipment for radiography and radioscopy.
EMC

Designed to meet IEC requirements for medical components.
(Note:External EMI filter may be required) RoHS
Controller and Tank Assembly are RoHS compliant.

Folleto para Soluciones de Servicio

Centros de Reparación Spellman, Programas de Garantía Extendida, Programas de Mantenimiento Preventivo, Servicios de Calibración y más.

Descargue

Manual de Referencia de Alto Voltaje 2026

Recopilamos todas las preguntas frecuentes que recibimos, notas de la aplicación, artículos, documentos técnicos y tres glosarios en una guía de referencia práctica.

Descargue

Suscríbase a nuestro boletín informativo de alto voltaje

Suscríbase a nuestro boletín informativo sobre alta tensión, que se publica trimestralmente con información relevante sobre tecnología y aplicaciones de fuentes de alimentación de alta tensión.