
Precision V6 Series
- Precision High Voltage compact Models up to 30kV
- High Stability, Low Ripple and Noise
- Local and Remote Programming and Monitoring
- RoHS Compliant
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
Compact 30W Precision High Voltage Power Supplies
The precision high voltage V6 Series is a family of regulated, fixed output polarity modular precision high voltage power supplies which provide exceptional performance and value in many applications. The V6 Series precision high voltage power units are fully enclosed and designed for system or bench top operation. A wide range of output voltages, up to 30kV is available. The output voltage is controlled locally by an internal multi-turn potentiometer. Remote analog voltage or resistance programming capability is included in all models. Analog monitor outputs are also included for remote monitoring of both the high voltage and current outputs.
The typical applications which the V6 Series precision high voltage power modules are used in are:
- Spectrometers
- CRT Testing
- Detectors
- E Beam Systems
- General Laboratory Usage
Specifications
(Ref. 128069-001 REV. L)
Input Voltage:
AC Model: 100-240Vac, ±10%; 50/60 Hertz; 1 amp
DC Model: 24Vdc ±10%, 2 Amps
Voltage Regulation:
Line: ±0.005% of maximum 90-240Vac input line change.
±0.005% of maximum ±10%Vdc input line change
Load: ±0.01% of maximum for 0 to maximum rated
output current change
Current Regulation:
Line: ±0.05% of maximum current for 90-240Vac input line change.
0.05% of maximum current for ±10% Vdc input change
Load: 0.2% of maximum current for 0 to maximum rated output voltage change
Ripple:
See “model selection” table
Temperature Coefficient:
≤ 50ppm/°C
Stability:
≤ 0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up
Operating Temperature:
0°C to +50°C
Storage Temperature:
-40°C to +85°C
Humidity:
20% to 85%RH, non-condensing
Local Control:
Internal multi-turn potentiometer for 0 to maximum output voltage (±0.2%)
Remote Programming:
0 to +5Vdc analog input signal proportional to 0 to maximum rated output. Accuracy is ±(0.1% of setting +0.1% of maximum). The programming input impedance is 20 megohms.
Voltage Monitor:
0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(0.1% of reading +0.1% of maximum). The monitor impedance is 10 kilohms.
Current Monitor:
0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(2.0% of reading +1.0% of maximum). The monitor impedance is 10 kilohms.
Enable:
Remote interlock enables (low) disables internally (high) the high voltage output. Signal is normally high and supply will default to a disabled condition.
Current Limit:
All units provide short circuit current limiting to less than 110% of the maximum rated output current. Supply is self restoring upon removal of cause limit condition.
Arc/Short Circuit:
Short circuit and arc protected; self restoring.
Cooling:
Convection cooled
Output Connector:
Models up to and including 5kV use a Spellman P/N JAC high voltage connector. The required mating connector is a Spellman P/N 105808-384, which is provided. The 10kV through 30kV units use a Spellman P/N JGP high voltage connector (Alden 8101). All 10 through 30kV units are 1 provided with mating connectors assembled to 2.0 meters 2 of high voltage cable.
Dimensions:
AC Model: 3.05. W X 5.1. H X 7.06. D (77mm X 132mm X 179mm)
DC Model: 2.32. W X 5.1. H X 7.06. D (59mm X 132mm X 179mm)
Weight:
AC Model: 4.5 pounds (2.0kg)
DC Model: 3.75 pounds (1.7kg)
Regulatory Approvals:
Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. UL/CUL recognized, File E227588. RoHS Compliant.
OPTIONS
RS - RS-232 Interface
V6A MODEL SELECTION TABLE
V6 AC Series | Voltage | Current | Ripple |
---|---|---|---|
V6A1*30 | 0 to 1kV | 0 to 30mA | 75mV |
V6A1.5*30 | 0 to 1.5kV | 0 to 20mA | 75mV |
V6A3*30 | 0 to 3kV | 0 to 10mA | 120mV |
V6A5*30 | 0 to 5kV | 0 to 6mA | 150mV |
V6A10*30 | 0 to 10kV | 0 to 3mA | 400mV |
V6A15*30 | 0 to 15kV | 0 to 2mA | 900mV |
V6A20*30 | 0 to 20kV | 0 to 1.5mA | 1.0V |
V6A30*30 | 0 to 30kV | 0 to 1mA | 1.8V |
*Specify “P” for positive polarity or “N” for negative polarity
V6D MODEL SELECTION TABLE
V6 DC Series | Voltage | Current | Ripple |
---|---|---|---|
V6D1*30 | 0 to 1kV | 0 to 30mA | 75mV |
V6D1.5*30 | 0 to 1.5kV | 0 to 20mA | 75mV |
V6D3*30 | 0 to 3kV | 0 to 10mA | 120mV |
V6D5*30 | 0 to 5kV | 0 to 6mA | 150mV |
V6D10*30 | 0 to 10kV | 0 to 3mA | 400mV |
V6D15*30 | 0 to 15kV | 0 to 2mA | 900mV |
V6D20*30 | 0 to 20kV | 0 to 1.5mA | 1.0V |
V6D30*30 | 0 to 30kV | 0 to 1mA | 1.8V |
*Specify “P” for positive polarity or “N” for negative polarity
V6A ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR
Pin | Signal | Signal Parameters |
---|---|---|
1 | Local Voltage Program | Multi-turn front panel potentiometer |
2 | TX Out (optional) | RS232 Receive Data |
3 | RX In (optional) | RS232 Transmit Data |
4 | Voltage Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
5 | Signal Ground | RS232 Ground (optional) |
6 | Signal Ground | Ground |
7 | +5V Reference Out | +5V @ 1mA Max. |
8 | HV Enable Input | Active Low to Enable the HV |
9 | Current Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
10 | Current Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
11 | Voltage Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
12 | HV Enable Output | Active Low HV is Enabled |
13 | Signal Ground | Ground |
14 | N/C | No Connection |
15 | N/C | No Connection |
V6D ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR
Pin | Signal | Signal Parameters |
---|---|---|
1 | Local Voltage Program | Multi-turn front panel potentiometer |
2 | TX Out (optional) | RS232 Receive Data |
3 | RX In (optional) | RS232 Transmit Data |
4 | Voltage Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
5 | Signal Ground | RS232 Ground (optional) |
6 | Signal Ground | Ground |
7 | +5V Reference Out | +5V @ 1mA Max |
8 | HV Enable Input | Active Low to Enable the HV |
9 | Current Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
10 | Current Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
11 | Voltage Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
12 | HV Enable Output | Active Low HV is Enabled |
13 | +24V Return | Input Voltage Return |
14 | +24Vdc Input | Input Voltage 24V±10%, 2A |
15 | +24Vdc Input | Input Voltage 24V±10%, 2A |
Tables & Diagrams
DIMENSIONS: in.[mm]
V6-AC
TOP VIEW
SIDE VIEW
BOTTOM VIEW
V6-DC
TOP VIEW
SIDE VIEW
BOTTOM VIEW
Frequently Asked Questions
What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
What Do You Mean That the Output Side of the High Voltage Cable on Most Standard Products Is “Unterminated”?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?