Series PFE - SB

  • 6kV to 20kV Versions Available
  • Continuously Variable Electronic Test Load Capable of Dissipating 30kW
  • Up and Down Ramp Rates for Voltage and Current
  • Programmable Electroding Functions Provided
  • Electronic Polarity Reversal
  • Data and Event Logging Functions
  • Alarm and Trip Functions

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

Shipborne Power Feed Equipment (PFE)

(Ref. 128144-001 REV. B)

Spellman High Voltage is the leading independent supplier of Power Feed Equipment to the Telecom industry and most frequently utilized power supplies for shipborne uses. Our Power Feed Equipment (PFE-SB) has been optimized for shipborne use to provide continuous power to a line whilst being laid and is known for its reliability and quality. It is used with repeatered fiber optic cable systems for telecommunications and has been installed on numerous cable laying ships around the world.

It provides all of the features to allow safe, reliable operation with configuration functions to suit all cable installation requirements. The PFE system is designed to provide a well-regulated, low ripple, high voltage supply at varying current requirements.

An advanced digital management system provides output configuration, control, polarity setting, continuous monitoring and alarm reporting from the Main Control Unit (MCU), or the System Management Terminal (SMT).

The Electronic Test Load is an active solid-state design allowing the load to be dynamically varied using a manual front panel control.

The system is powered directly from 3-phase supply without the need for autotransformers.

 

SPECIFICATIONS:

PFE-SB—Input/Output

Model Output Voltage Output Current Input Current Input Current
(per phase max)
PFESB6PN12 6kV 2A max 400Vac 3 phase ±10% 50/60Hz  25A 
PFESB10PN24 10kV 2.4A max 400Vac 3 phase ±10% 50/60Hz  40A 
PFESB15PN36 15kV 2.4A max 400Vac 3 phase ±10% 50/60Hz  60A 
PFESB20PN40 20kV  2A max 400Vac 3 phase ±10% 50/60Hz   75A
 

Input Wiring:
3Φ + Neutral (Star). For a 3Φ supply without a neutral (delta), a single phase 230Vac 10A supply will be required to power the control modules.

Voltage Ripple:
<0.3%

Stability:
Typically <0.25% over any 24 hour period with a temperature range of 0°C to 30°C.

Voltage Regulation:
Load: 0.05% of full voltage for full load change.
Line: +/-0.05% of full voltage +500mV over specified range.

Current Regulation:
Load: 0.05% of full current for any voltage change.
Line: +/-0.05% of full current over specified input range.

Temperature Coefficient:
< 100 ppm/°C

Operating Temperature:
0 to +30°C

Storage Temperature:
-10 to +70°C

Humidity:
0% to 90%, non-condensing

Cooling:
Forced Air. 210 liters/sec (445 cfm) per cabinet, 1500 liters/sec (3180 cfm) for the test load.

Regulatory Approvals:
Designed to meet IEC/UL 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use; CAN/CSA-C22.2 No.61010-1. 

KEY FEATURES:

Clamp/Safety Chassis:
Protects the repeaters/cable and PFE. A HV relay and dump circuit will quickly and safely discharge the system in case of emergency shutdown. A front panel mounted lamp indicates if the PFE output is energized.

Output Control:
Using either the Main Control Unit (MCU) or SMT; the system output can be operated in constant current or constant voltage control and as a feed for a single end, double end or branched line.

Advanced Touchscreen Control and Monitoring SystemSystem Management Terminal (SMT):
The SMT is an advanced touchscreen control and monitoring system which can be installed within the PFE cabinets or remotely up to 80m from the PFE.  

  • Full output control and monitoring
  • Fully adjustable ramp rates in current or voltage control: 10V-10kV/min and 10mA-10A/min
  • User settable over/under voltage and current trips and alarms
  • Output voltage and current logging
  • Event logging
  • Programmable electroding (tone generator 10-40Hz provided)

 

Typical System Management Screens:

Typical System Management Screens:

Main Control Unit (MCU):

Main Control UnitThe system can be controlled manually using the MCU front panel controls. 

  •  4.2” LCD display
  • Full output control and monitoring including polarity reversal
  • Test points for voltage and current
  • Front panel controls for voltage and current
  • Ramp rates available: Default: 60kV/min 6A/min. Slow: 500V/min 0.2A/min.
  • Over volts/current trips
  • HV and Alarm outputs

Patch Panel:
User configurable interconnects from Converter(s) to Electronic Load or Cable Termination Cubicles (CTC’s).

Electronic Load:
Fully isolated and actively adjustable resistance by the user. 
Max power: 30kW
Max voltage: ± 15kV @ 2A
Max current: 2.4A @ ±12.5kV

Interlock System:
Full protection for user and connected equipment. All PFE access panels and patch panel connections are interlocked. External connection terminals are provided to allow connection to CTCs, associated equipment or external E-Stop circuits.

Optional Hood (17668-4)
A flange at the rear provides attachment of exhaust ducting, allowing most of the heat dissipated from the system to be transferred outside the immediate environment of the PFE. 

Optional Cable Termination Cubicle (CTC12/377)
Facility to safely accommodate half joints and bare cables for installation and repairs. The CTC provides a safe, interlocked enclosure for connection of the PFE HV to the cable conductors. 2 clamps and strain relief allow the fiber core to be separated and safely routed out of the box to external optical equipment.

 

Optional Cable Termination Cubicle

W 27.26˝ [692mm]
D 10.44˝ [265mm]
H 8.27˝ [210mm]

 

Dimensions: in.[mm]

PFESB6PN12

Weight:
Cabinet 1: 441 lbs. [200kg]
SMT: 33 lbs. [15kg]
Electronic Load: 364 lbs. [165kg]

PFESB6PN12 

 

PFESB10PN24

Weight:
Cabinet 1: 1529 lbs. [240kg]
SMT: 33 lbs. [15kg]
Electronic Load: 364 lbs. [165kg]

PFESB10PN24 

Dimensions: in.[mm]

    

PFESB15PN36

Weight:
Cabinet 1: 507 lbs. [230kg]
Cabinet 2: 309 lbs. [140kg]
Electronic Load: 364lbs. [165kg]

PFESB15PN36 

PFESB20PN40

Weight:
Cabinet 1: 507 lbs. [230kg]
Cabinet 2: 419 lbs. [190kg]
Electronic Load: 364lbs. [165kg]

PFESB20PN40