CZE2000

  • Cost Effective Modular Supply; Ideal for Electrospinning
  • 0-30kV. 0-300µA; Local or Remote Programmable
  • Polarity Reversible Upon Command in <1 Sec at No Load
  • Low Stored Energy, Current Limited Output

자동 극성 고전압 전원 공급 장치

Spellman’s CZE2000 modular high voltage power supply is ideal for OEM usage. It is specifically designed to meet the needs of applications requiring a hot switched reversible output voltage. The output polarity of the unit can be quickly and safely reversed via the Polarity Control Signal provided on the interface connecter.

Both the output voltage and current are fully adjustable via ground referenced remote programming signals such that 0 to 10Vdc corresponds to 0 to 100% rated output voltage and current.

Remote motioning functionality is provided by voltage and current test points such that 0 to 10Vdc corresponds to 0 to 100% rated voltage and current. Additionally remote polarity and mode indicators provide a comprehensive overview of power supply operation.

Excellent load and line regulation specifications along with outstanding stability and low ripple assure a stable high voltage output for consistent process results.

Typical applications:

  • Electrospinning
  • Mass Spectrometry
  • Capillary Electrophoresis
  • Electrostatic Research

CE RU Marking

사양

(Ref. 128076-001 REV. F)

Input Voltage:

24Vdc, ±10%

Input Current:

Less than 1 amp

Efficiency:

75% typical

Output Voltage:

See selection table

Output Current:

See selection table

Polarity:

Auto reversible via command

Power:

10 watts, maximum

Line Regulation:

0.01% for a 10% input voltage change

Load Regulation:

0.01% for a full load change

Ripple:

0.1% Vp-p

Stability:

0.02% per 8 hours (after 1/2 hr warmup)

NL Time Constant:

100ms

Stored Energy:

0.2 Joules at 30kV

Temperature Coefficient:

100ppm/°C

Operating Temperature:

0°C to 40°C

Storage Temperature:

-40°C to 85°C

Humidity:

10% to 85% RH, non condensing

Cooling:

Convection cooled

Dimensions:

3.5”H x 5”W x 10”D (8.9cm x 12.7cm x 25.4cm).

Weight:

6.2lbs. (2.8kg)

Interface Connector:

25 pin male D connector

HV Output Connector:

Detachable 36. (0.91m) cable provided

Regulatory Approvals:

Compliant to 2004/108/EC, The EMC Directive and 2006/95/EC, The Low Voltage Directive, UL/CUL recognized file E148969

CZE2000 SELECTION TABLE

Maximum Rating Model Number
kV mA  
5 2.0 CZE 5PN10
10 1.0 CZE 10PN10
15 0.67 CZE 15PN10
20 0.50 CZE 20PN10
30 0.30 CZE 30PN10

CZE2000 25 PIN MALE D CONNECTOR

Pin Signal Parameters
1 +24Vdc Return Power Return
2 +24Vdc Return Power Return
3 +24Vdc Return Power Return
4 HV Enable/Inhibit Open or <1Vdc = HV OFF, >3.4Vdc
(up to 15Vdc) = HV ON1
5 Voltage Test Point 0 to 10Vdc = 0 to 100% rated output, Zout =10kΩ, 1%
6 Current Test Point 0 to 10Vdc = 0 to 100% rated output, Zout =10kΩ, 1%
7 Chassis Ground Ground
8 Remote Voltage Control 0 to 10Vdc = 0 to 100% Rated Output, Zin =10MΩ
9 Remote Current Control 0 to 10Vdc = 0 to 100% Rated Output, Zin =10MΩ
10 +10Vdc Reference Output +10Vdc, 4mA maximum
11 Signal Return Signal Return
12 Polarity Control Open or >3.4Vdc (up to 15Vdc) = Positive Polarity. Grounded or <1Vdc = Negative Polarity
13 Positive Polarity Indicator +24Vdc sourced through a 100Ω series limiting resistor. +24Vdc = active signal
14 +24Vdc Input Power Input
15 +24Vdc Input Power Input
16 Chassis Ground Ground
17 Negative Polarity Indicator +24Vdc sourced through a 100Ω series limiting resistor. +24Vdc = active signal
18 I Mode Indicator Open collector pulled up internally to +15Vdc through 2.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
19 V Mode Indicator Open collector pulled up internally to +15Vdc through 2.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
20 Return Current Test Point 0 to 10Vdc = 0 to 100% rated output current, as measured returned from load. Zout =10kΩ, 1%
21 Load Return High Voltage Return Point. Required for GFI circuit functionality
22 Ground Fault Indicator Open collector pulled up internally to +15Vdc through 4.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
23 Spare No Connection
24 Spare No Connection
25 Spare No Connection

테이블 및 다이어그램

DIMENSIONS: in.[mm]

FRONT VIEW

CZE2000 자동 극성 고전압 전원 공급 장치 (Image 1)

TOP VIEW

CZE2000 자동 극성 고전압 전원 공급 장치 (Image 2)

BOTTOM VIEW

CZE2000 자동 극성 고전압 전원 공급 장치 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.