- Output Voltages from 1kV to 70kV
- Low Stored Energy
- UL Recognized and CE compliant
- OEM Customization Available
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
120W High Voltage Power Supplies
Spellman’s AC input PCM Series of 120 watt high voltage power supply modules feature a power factor corrected front end, providing 0.99 power factor along with universal input voltage (85Vac to 265Vac) capabilities. These fixed polarity modules (specify positive or negative at time of order) feature both voltage and current regulation with automatic crossover, making them ideal for sensitive load applications. The robust design of PCM Series along with comprehensive arc and short circuit protection allow operation in the most demanding environments.
- Hipot Testing
- Detector Arrays
- Cable Testing
(Ref. 128006-001 REV. T)
85-265Vac, 47-63Hz @ 1.8A, power factor corrected.
UL® rated for 85-250Vac input for 1kV to 5kV models.
Power Factor (Typical):
80 to 85%, typical
11 models from 1kV to 70kV. Positive or negative polarity outputs, specify at time of order.
Load: 0.01% of output voltage, no load to full load.
Line: ±0.01% for ±10% change in input voltage.
Load: 0.01% of output current from 0 to rated voltage. Line: 0.01% of rated current over specified input range.
0.1% p-p of maximum output voltage.
0.02% per 8 hours.
100ppm per °C, voltage or current regulated.
Operational: 0 to 40°C
Storage: -40°C to +85°C
Humidity: 0 to 90%, non-condensing
1kV to 50kV: 3.65”H x 5”W x 9”D (9.27cm x 12.7cm x 22.9cm).
60, 70kV: 3.65”H x 5”W x 11”D (9.27cm x 12.7cm x 27.9cm).
7 pounds (3.18kg)
AC Input Connectors:
IEC320 with mating cable.
15 pin D connector.
HV Output Cable:
Spellman Delrin type connector with 36” (91.4cm) shielded cable.
Front Panel Ground Connection:
Threaded 8-32 ground stud
Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. UL/CUL recognized, File E148969 (up to 60kV only). RoHS Compliant
PCM SELECTION TABLE
|Maximum Rating||Model Number|
*Specify “P” for positive polarity or “N” for negative polarity.
PCM D CONNECTOR 15 PIN
|1||Remote mA Program||0 to 10Vdc = 0 to 100% of rated output|
|2||Remote kV Program||0 to 10Vdc = 0 to 100% of rated output|
|3||High Voltage Enable/Inhibit||Open = HV Inhibit, Ground = HV ON|
|4||mA Monitor||0 to 10Vdc = 0 to 100% of rated output|
|5||Interlock Return||Connect to pin 6 to close interlock circuit|
|6||Interlock Out||Connect to pin 5 to close interlock circuit|
|7||kV Monitor||0 to 10Vdc = 0 to 100% of rated output|
|8||Local kV Program||Multi-turn front panel pot (screwdriver)|
|9||Power Supply Fault||0Vdc = No Fault, +15Vdc @ 1mA = Fault|
|10||+10Vdc Reference||+10Vdc @ 1mA maximum|
|11||Signal Ground||Signal Ground|
|15||Local mA Program||Multi-turn front panel pot (screwdriver)|
테이블 및 다이어그램
Frequently Asked Questions
What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
What Kind of High Voltage Connector Do You Use on Your Supplies?
What Do You Mean That the Output Side of the High Voltage Cable on Most Standard Products Is “Unterminated”?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?
Application Notes AN-19 – High Voltage Cable Lengths Discussed