XRB200PN400/2 Monoblock®
- 200kV and 400W
- X-Ray Tube Current: 0.5mA to 2.0mA @ 200kV
- Symmetrical fan beam of 85° X 4°, ±1%
- Power factor corrected input to 0.98
- 100Vac to 240Vac, ±10%
- Logging and Firmware Controlled X-Ray Tube Seasoning
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
Spellman’s XRB200PN400/2 is an integrated X-Ray source operating up to 200kV and 400W, providing OEM users a compact plug-and-play Monoblock® for critical inspection and screening applications. The unit incorporates a 15° angle stationary anode X-Ray tube offering a symmetrical fan beam of 85° X 4°. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, with industry leading dose stability and image quality. This compact model comes with standard analog and RS-232 digital control. Spellman can provide customized versions of this platform for specific OEM system requirements.
TYPICAL APPLICATIONS
Aviation Security Screening: Checked Baggage/EDS Vehicle Inspection, Cargo Inspection, General NDT
- 사양
- 다운로드
사양
(Ref. 128085-001 REV. B)
- X-Ray Characteristics:
- Tube Type:
Stationary Anode, tungsten target - Focal Spot:
0.8 x 0.8mm nominal (IEC60336) - Beam Filter:
Glass 2.1mm, maximum. Oil 18mm. - Beam Geometry:
Symmetrical fan of 85° X 4°, ±1% - Anode Angle:
15° - Input Voltage:
Power factor corrected input to 0.98. 100Vac to 240Vac, ±10%, 50/60 Hertz. 6 Amps, maximum - X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 100kV to 200kV - Voltage Accuracy:
The high voltage measured at the X-ray tube will be within ±1% of the selected value. - Voltage Ripple:
Ripple will be 1% of maximum rated voltage for frequencies ≤1kHz. - Voltage Regulation:
< ±0.1% for ±10% of nominal input line change
< ±0.1% for 0.5mA to 2mA load change - Voltage Overshoot:
kV overshoot will return within 5% of full voltage in less than 100ms. - Risetime:
The voltage and current risetime is controlled by a ramping circuit. Ramp time is less than 1.0 second from 10% to 90% of output voltage and current. - X-Ray Tube Current:
0.5mA to 2.0mA @ 200kV, 400 watts maximum - Current Accuracy:
<±1% of the selected value. - Current Regulation:
<0.5% at 100 - 200 kV, 0.5mA to 2.0mA - Arc Intervention:
Unit will detect a single arc but HV will not shut down. If multiple arcs occur (4 in 10 seconds) then the unit will shut down. - Filament Configuration:
Isolated high frequency AC filament drive operated in current mode with closed loop thermionic filament emission control. - Digital Interface:
The RS-232 and Ethernet interfaces allow for programming of the voltage, current and X-Ray Enable. Provides monitoring for voltage, current and oil temperature. Tolerance is 3%. - Control Software:
A demo GUI is available for engineering evaluation. - Operating Temperature:
0°C to +40°C - Storage Temperature:
-40°C to +70°C - Humidity:
10% to 95% relative humidity, non-condensing. - Cooling:
Heat exchanger with fan and oil pump. Customer provided +24Vdc @ 3A is required. In certain situations, external cooling fans of 250CFM may be required to maintain tank/oil temperature below 55°C. - Input Line Connector:
3 pin Phoenix Contact, p/n 1829167. Mating connector provided with unit.
다운로드
스펠만 고전압 뉴스레터를 구독하세요
분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.