XRB160PN688/CT Monoblock®

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & LIghtweight
Power Factor Corrected
Can be Mounted in Any Physical Orientation
Standard RS-232 Digital Interface

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

견적 받기

160kV, 688W X-Ray Source

Spellman’s XRB160PN688/CT Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 160kV at 688W. Features like small package size and RS-232 digital interface simplify integrating this unit into your X-Ray system. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical applications:

X-Ray Scanning: Food Inspection
Fill Level Confirmation
Security Applications

사양
다운로드

사양

^{(Ref. 128088-001 REV. G)}

X-Ray Characteristics:
Tube Type:
Glass tube, Tungsten target, Be filter
Focal Spot:
2.5mm x 2.5mm (IEC 60336)
Beam Filter:
1.5mm glass, 9-26mm oil, 0.4mm Al
Beam Geometry:
Asymmetrical fan 93° x 15°
Input Voltage:
230Vac, ±15%, 50/60Hz, 5A max
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 50kV to 160kV
X-Ray Tube Current:
0.25mA to 4.3mA over specified tube voltage range
X-Ray Tube Power:
700W, maximum continuous
Voltage Regulation:
Line:
±0.1% ±10%
Load:
±0.1% 0.25 to 6mA
Voltage Accuracy:
Voltage measured across the X-Ray tube is within 1% of the programmed value
Voltage Risetime:
Ramp time shall be 500ms nominal, 1 second maximum from 10% to 90% of rated output
Voltage Overshoot:
Within 5% of rated voltage
Voltage Ripple:
1% p-p of rated voltage
Current Regulation:
Line:
±0.5% ±10%
Load:
±0.5% 0.25 to 4.3mA
Current Accuracy:
Current measured through the X-Ray tube is within 5% of the programmed value
Current Risetime:
500ms nominal, 1 second maximum
Arc Intervention:
4 arcs in 10 seconds = shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Digital Interface:
RS-232 interface.
Control Software:
A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.
Interlock Signals:
A hardware interlock function is provided
Operating Temperature:
5°C to +40°C
Storage Temperature:
-25°C to +65°C
Humidity:
10% to 90% relative humidity, non-condensing
Cooling:
Heat exchanger w/fan and oil pump, powered from AC
Input Line Connector:
5 pin Molex 26-60-4050
Cooling Power Connector:
4 pin Tyco 206061-1
Digital Interface Connector:
9 pin D connector, female
Grounding Point:
M5 ground stud provided on chassis
Dimensions:
See drawing
Weight:
140lbs ±10lbs (64kg ±4.5kg)
Orientation:
Can be mounted in any orientation.
X-Ray Leakage:
Less than 300uR/hr at a distance of 10cm from all surfaces
Special Features:
Stationary or rotating CT application up to 100rpm at a maximum radius 20.25˝ (514mm).

다운로드

Monoblock® Brochure

스펠만 고전압 뉴스레터를 구독하세요

분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.