SpellmanHV X-Ray Generator System Interface Box

XRV I/O

  • Mains to Cooler/Chiller, XRV Generator and XRV Touch Screen Controller
  • Integrates all Necessary Safety Mechanisms to X-Ray System Environment to Meet International Standards
  • X-Ray On, Pre-Warn and Safety Circuit Lamps
  • Monitors Tube Cooling and Door Interlocks
  • Rack and Wall Mount Versions Available
  • Fail Safe Interlock Option Available

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

CE ROHS Marking

X-Ray Generator System Interface Box

Spellman’s optional XRV I/O box is the ideal accessory for integrating Spellman’s XRV X-Ray generators to a system environment. The XRV can now easily be packaged with industry standard metal ceramic X-Ray tubes, coolers and chillers while meeting all necessary safety and interlock requirements. The XRV I/O box is capable of accommodating a number of control interface options and can be installed in rack or wall configurations to best suit the integrators system placement requirements.

Typical applications:

  • Power distribution for system components

사양

(Ref. 128112-001 REV.B)

Input Voltage:

180-264Vac, 50/60Hz

Operating Temperature:

0°C to +50°C

Storage Temperature:

-20°C to +80°C

Humidity:

0% to 95% relative humidity, non-condensing

Cooling:

Convection

Dimensions:

19.0"W X 5.21"H X 18.00"D (482.6mm X 132.33mm X 330.2mm)

Weight:

30lbs (11.19kg)

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. RoHS Compliant

Typical system set-up:

XRV X-Ray I/O Box (Image 1)

XRV I/O BOX SELECTION TABLE

MODELNUMBER DESCRIPTION
XRV-9-1 XRV I/O Box - Rack mount without XRV controller
XRV-9-2 XRV I/O Box - Rack mount with XRV controller
XRV-9-3 XRV I/O Box - Wall mount without XRV controller
XRV-9-4 XRV I/O Box - Wall mount with XRV controller

TB1, TB2, TB3-MAIN AC INPUT POWER—

PIN SIGNAL PARAMETERS
TB1-1 Line 1 180 - 264Vac
TB2-1 Line 2 Neutral or 180 - 264Vac
(3 phase source)
TB3-1 GND Ground

TB4- COOLER / CHILLER—MAINS AC OUTPUT

PIN SIGNAL PARAMETERS
1 Line 1 180 - 264Vac
2 Line 2 180 - 264Vac or Neutral
3 GND Ground

TB5-COOLER / CHILLER INTERLOCKS

PIN SIGNAL PARAMETERS
1 Flow INTLK Dry contacts, ≤24Vdc
2 Common Dry contacts, ≤24Vdc
3 Temp INTLK Dry contacts, ≤24Vdc

TB6-LOW VOLTAGE / DOOR INTERLOCKS

PIN SIGNAL PARAMETERS
1 Door INTLK Dry contacts, ≤24Vdc
2 Door INTLK Dry contacts, ≤24Vdc

TB7-XRV I/O MAINS TO CDRH* SAFETY INTERLOCK

PIN SIGNAL PARAMETERS
1 Power INTLK Line 1 OUT 180 - 264Vac
2 Line 1 IN 180 - 264Vac
3 Power INTLK Line 2 OUT Neutral or 180 - 264Vac
(3 phase source)
4 Line 2 IN Neutral or 180 - 264Vac
(3 phase source)
5 GND Ground

TB8-XRV AUX AC OUTPUT—TO XRV JB1

PIN SIGNAL PARAMETERS
A Line 1 180 - 264Vac
B Line 2 Neutral or 180 - 264Vac
(3 phase source)
C GND Ground

TB9-XRV I/O TO XRV CONTROLLER INTERFACE

PIN SIGNAL PARAMETERS
1 Line 1 180 - 264Vac
2 Line 2 Neutral or 180 - 264Vac
3 GND Ground
4 INTLK 1 Dry contacts, ≤24Vdc
5 INTLK 2 Dry contacts, ≤24Vd
6 INTLK Common Common for INTLK 1, 2
7 X-Ray ON Light Dry contacts, ≤24Vdc
8 Pre-Warn Light Dry contacts, ≤24Vdc
9 Light Common Light common
10 Key Switch 2 Dry contacts, ≤24Vdc
11 Key Switch 3 Dry contacts, ≤24Vdc
12 Key Switch Common Key common

TB11-X-RAY ON / PRE-WARN LIGHTS

PIN SIGNAL PARAMETERS
1 X-Ray ON Light 180 - 264Vac, 5 amp
2 X-Ray ON Light 180 - 264Vac, 5 amp
3 Pre-Warn Light 180 - 264Vac, 5 amp
4 Pre-Warn Light 180 - 264Vac, 5 amp

테이블 및 다이어그램