MS Series

  • Low Cost
  • Output Voltages up to 3kV
  • 3 Watts Power Rating
  • Positive or Negative Polarity
  • Arc and Continuous Short Circuit Protected
  • Low Stored Energy
  • High Reliability
  • Internal 5V Reference
  • OEM Customization Available

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

CE ROHS Marking

Data Sheet
Mass Spectrometry Brochure

3W DC-DC High Voltage Power Supplies

Spellman’s MS Modules have been designed for printed circuit board mounting with high reliability, small size and light weight. The MS 3W modules provide well regulated, low ripple, high stability output voltages ranging from 300V to 3kV in a versatile, compact and cost-effective design. The modules incorporate remote control and arc & short-circuit protection. Radiated pickup is eliminated by sealing each module in an aluminum enclosure.

TYPICAL APPLICATIONS

  • Photomultiplier Tubes
  • Precision Lenses
  • Image Intensifiers
  • Nuclear Instruments
  • Spectroscopy

사양

(Ref. 128018-001 REV. N)

OPTIONS

I Isolated Input to Output
Maximum Isolation Voltage:
40V for units ≤1kV
100V for units >1kV

Note: this option is only available for certain models, please consult Spellman for availability.

SPECIFICATIONS

Input Voltage:

+12Vdc ±1V. Other input voltages also available.

Input Current: 

< 0.56A at full output.

Output Voltage: 

Continuously adjustable over each entire range Models available in either positive or negative polarity. See table for voltage ranges. 

Output Voltage Control: 

Remote voltage programming such that 0-5Vdc gives 0 to full rated output

Output Power: 

3W continuous

Load Regulation: 

< 0.05% for 100μA to full load change. (at max. voltage)

Output Voltage Control: 

Remote voltage programming such that 0-5Vdc 
gives 0 to full rated output 

Output Power: 3W continuous. 

Voltage Regulation:

Line: 0.005% for input change of 1V (<0.01% for MS0.3 units)
Load: 0.05% for 100µA to full load change at maximum voltage. (<0.1% for MS0.3 units)

Ripple: See MS selection table

5Vdc Reference: +5.0V (±0.2V). A maximum of 1mA can be drawn from this output. 

Temperature:

Operating: 0°C to +50°C. 
Storage: -35°C to +85°C. 

Temperature Coefficient: 50ppm/°C typical. 

Stability:

 < 0.05%/8 hrs at constant operating conditions after one hour warm-up. 

Humidity: 0 to 90% non-condensing. 

Dimensions:

Units ≤1kV:
.87”H x 2.1”W x 3.1”D (23mm x 53mm x 78mm).

Units >1kV:
1.1”H x 2.36”W x 4.2”D (28mm x 60mm x 106mm).

Weight: 

Units ≤1kV: 0.2lb (80g).
Units >1kV: 0.4lb (160g).

Regulatory Approvals: 

Compliant to EEC Low Voltage Directive. UK Conformity Assessed. RoHS Compliant.

 

 

MS SELECTION TABLE

Output Voltage (V) Output Current (mA) Ripple V (p‑p) Model
300 10 0.03 MS0.3*
500 6 0.05 MS0.5*
750 4 0.075 MS0.75*
1000 3 0.10 MS1*
1500 2 0.15 MS1.5*
2000 1.5 0.20 MS2*
2500 1.2 0.25 MS2.5*
3000 1 0.30 MS3*

 

How to Order:

MSXX*12/C/I
Where:
XX is the Output voltage (see selection table)
* is the polarity: P for positive / N for negative 12 is the input voltage. This is 12V /I is the floating output option., if required.

Examples: MS2P12/C, MS0.3P12/C/I

테이블 및 다이어그램

DIMENSIONS: in.[mm]

UNIT UP TO 1000V

SIDE VIEW

MS Series

BOTTOM VIEW

MS Series

UNIT > 1000V UP TO 3000V

SIDE VIEW

MS Series

BOTTOM VIEW

MS Series

View on pins. Recommended hole size for terminals 1mm.

Frequently Asked Questions

What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?