CCM

  • Compact & Lightweight Package
  • Power Factor Corrected Input
  • Low Cost Modular OEM Platform
  • Rugged IGBT Inverter Design
  • Auxiliary +24Vdc @ 2.2 Amp Output Provided
2 Year Extended Warranty

4kW 콘덴서 충전 모듈

Spellman’s CCM capacitor charging module is designed to provide 3100 joules per second at an output voltage up to 4000 Volts. With a power density of 6.6 watts per cubic inch, the CCM packs more than 30% more power into the same volume when compared to other commercially available units. The power factor corrected AC input, small package size and comprehensive analog interface simplifies integrating the CCM into your OEM system design. Available in either positive or negative polarity, the CCM is fully arc, open and short circuit protected.

Typical applications:

  • UV light sources for curing and sterilization
  • Industrial and medical laser applications
  • ICP-MS applications

CE Marking

사양

(Ref. 128054-001 REV. K)

Input Voltage:

180-264 Vac, 47-63 Hertz, power factor corrected input =0.98, fused via externally accessible fuses

Efficiency:

>85%

Output Power:

3100 Joules per second, average

Output Voltage:

4000 Volts, maximum

Output Polarity:

Positive or negative, specify at time of order

Pulse to Pulse Repeatability:

±0.6% up to 120 Hertz

Temperature Coefficient:

≤ 100ppm per degree C

Fault Diagnostic System:

Over Temperature, Over Voltage and Open Load sensing

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90% RH, non-condensing

Cooling:

Forced air

Ground Stud:

M6 X10mm, M6 nut supplied

Input Line Connector:

2 position Phoenix HDFK4 connector

HV Output Connector:

Kings KV-79-15, Bulkhead mounted

+24Vdc Output Connector:

AMP #1-350942-0

Dimensions:

5.81. H X 5.8. W X 14. D (148mm x 147mm x 356mm)

Weight:

14.5lb. (6.6kgs)

Regulatory Approvals:

UL Safety Test Standards:

ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10)

CAN/CSA-C22.2 No. 60601-1 (2008)

EMC Test Standard:

IEC 60601-1-2

AUXILIARY +24VDC CONNECTOR J2 POSITION AMP CONNECTOR

Pin Signal Signal Parameters
1 +24Vdc +24Vdc @ 2.2 amps
2 Ground Ground

CCM ANALOG INTERFACE— J1 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Inhibit Ground = HV ON, High = HV OFF
2 Temperature Fault Ground = No Fault, +15Vdc = Fault
+15Vdc through 6.8kΩ
3 General Fault Ground = No Fault, +15Vdc = Fault
+15Vdc through 6.8kΩ
4 HV ON Indicator Ground = HV ON, +15Vdc = HV OFF
+15Vdc through 6.8kΩ
5 Voltage Program 0 to 10Vdc = 0 to 100% Rated Output
6 Open Circuit Detector Ground = Open Circuit, +15Vdc = OK
+15Vdc through 6.8kΩ
7 Peak Voltage Monitor 0 to 10Vdc = 0 to 100% Rated Output
held for 10 seconds at peak level
8 Voltage Monitor 0 to 10Vdc = 0 to 100% Rated Output,
Instantaneous output
9 +15Vdc Output +15Vdc @ 150ma output, maximum
10 n/c n/c
11 +15Vdc Output +15Vdc @ 150ma output, maximum
12 +15Vdc Output +15Vdc @ 150ma output, maximum
13 End of charge Indicator Ground = End of Charge, High Impedance = Charging
14 Ground Ground
15 Ground Ground

테이블 및 다이어그램

DIMENSIONS: in.[mm]

FRONT VIEW

CCM 4kW 콘덴서 충전 모듈 (Image 1)

TOP VIEW

CCM 4kW 콘덴서 충전 모듈 (Image 2)

BACK VIEW

CCM 4kW 콘덴서 충전 모듈 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.