SERIE V6
- Modelos compactos de hasta 30 kV
- Alta estabilidad, ruido y rizo bajos
- Monitoreo y programación local y remota
- Cumple con RoHS
FUENTES DE ALIMENTACIÓN COMPACTAS DE ALTO VOLTAJE DE 30 W
La serie V6 es una familia de fuentes de alimentación modulares de alto voltaje reguladas de polaridad de salida fija y de precisión que proporcionan un rendimiento y valor excepcionales en muchas aplicaciones. Las unidades de alimentación de alto voltaje de precisión de la serie V6 son completamente cerradas y están diseñadas para su funcionamiento en un sistema o sobre la mesa de trabajo. Están disponibles con un amplio rango de voltajes de salida de hasta 30 kV. El voltaje de salida se controla localmente mediante un potenciómetro interno de vueltas múltiples. En todos los modelos se incluye la capacidad de programación remota por voltaje analógico o resistencia. También se incluyen salidas analógicas de monitoreo para el monitoreo remoto de las salidas de alto voltaje y de corriente.
Las aplicaciones típicas en la cuales se utilizan los módulos de energía de alto voltaje de la serie V6 son:
- Espectrómetros
- Pruebas de CRT
- Detectores
- Sistemas de rayos de electrones
- Usos generales de laboratorio
Especificaciones
(Ref. 128069-001 REV. L)
Input Voltage:
AC Model: 100-240Vac, ±10%; 50/60 Hertz; 1 amp
DC Model: 24Vdc ±10%, 2 Amps
Voltage Regulation:
Line: ±0.005% of maximum 90-240Vac input line change.
±0.005% of maximum ±10%Vdc input line change
Load: ±0.01% of maximum for 0 to maximum rated
output current change
Current Regulation:
Line: ±0.05% of maximum current for 90-240Vac input line change.
0.05% of maximum current for ±10% Vdc input change
Load: 0.2% of maximum current for 0 to maximum rated output voltage change
Ripple:
See “model selection” table
Temperature Coefficient:
≤ 50ppm/°C
Stability:
≤ 0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up
Operating Temperature:
0°C to +50°C
Storage Temperature:
-40°C to +85°C
Humidity:
20% to 85%RH, non-condensing
Local Control:
Internal multi-turn potentiometer for 0 to maximum output voltage (±0.2%)
Remote Programming:
0 to +5Vdc analog input signal proportional to 0 to maximum rated output. Accuracy is ±(0.1% of setting +0.1% of maximum). The programming input impedance is 20 megohms.
Voltage Monitor:
0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(0.1% of reading +0.1% of maximum). The monitor impedance is 10 kilohms.
Current Monitor:
0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(2.0% of reading +1.0% of maximum). The monitor impedance is 10 kilohms.
Enable:
Remote interlock enables (low) disables internally (high) the high voltage output. Signal is normally high and supply will default to a disabled condition.
Current Limit:
All units provide short circuit current limiting to less than 110% of the maximum rated output current. Supply is self restoring upon removal of cause limit condition.
Arc/Short Circuit:
Short circuit and arc protected; self restoring.
Cooling:
Convection cooled
Output Connector:
Models up to and including 5kV use a Spellman P/N JAC high voltage connector. The required mating connector is a Spellman P/N 105808-384, which is provided. The 10kV through 30kV units use a Spellman P/N JGP high voltage connector (Alden 8101). All 10 through 30kV units are 1 provided with mating connectors assembled to 2.0 meters 2 of high voltage cable.
Dimensions:
AC Model: 3.05. W X 5.1. H X 7.06. D (77mm X 132mm X 179mm)
DC Model: 2.32. W X 5.1. H X 7.06. D (59mm X 132mm X 179mm)
Weight:
AC Model: 4.5 pounds (2.0kg)
DC Model: 3.75 pounds (1.7kg)
Regulatory Approvals:
Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. UL/CUL recognized, File E227588. RoHS Compliant.
OPTIONS
RS - RS-232 Interface
V6A MODEL SELECTION TABLE
| V6 AC Series | Voltage | Current | Ripple |
|---|---|---|---|
| V6A1*30 | 0 to 1kV | 0 to 30mA | 75mV |
| V6A1.5*30 | 0 to 1.5kV | 0 to 20mA | 75mV |
| V6A3*30 | 0 to 3kV | 0 to 10mA | 120mV |
| V6A5*30 | 0 to 5kV | 0 to 6mA | 150mV |
| V6A10*30 | 0 to 10kV | 0 to 3mA | 400mV |
| V6A15*30 | 0 to 15kV | 0 to 2mA | 900mV |
| V6A20*30 | 0 to 20kV | 0 to 1.5mA | 1.0V |
| V6A30*30 | 0 to 30kV | 0 to 1mA | 1.8V |
*Specify “P” for positive polarity or “N” for negative polarity
V6D MODEL SELECTION TABLE
| V6 DC Series | Voltage | Current | Ripple |
|---|---|---|---|
| V6D1*30 | 0 to 1kV | 0 to 30mA | 75mV |
| V6D1.5*30 | 0 to 1.5kV | 0 to 20mA | 75mV |
| V6D3*30 | 0 to 3kV | 0 to 10mA | 120mV |
| V6D5*30 | 0 to 5kV | 0 to 6mA | 150mV |
| V6D10*30 | 0 to 10kV | 0 to 3mA | 400mV |
| V6D15*30 | 0 to 15kV | 0 to 2mA | 900mV |
| V6D20*30 | 0 to 20kV | 0 to 1.5mA | 1.0V |
| V6D30*30 | 0 to 30kV | 0 to 1mA | 1.8V |
*Specify “P” for positive polarity or “N” for negative polarity
V6A ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR
| Pin | Signal | Signal Parameters |
|---|---|---|
| 1 | Local Voltage Program | Multi-turn front panel potentiometer |
| 2 | TX Out (optional) | RS232 Receive Data |
| 3 | RX In (optional) | RS232 Transmit Data |
| 4 | Voltage Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
| 5 | Signal Ground | RS232 Ground (optional) |
| 6 | Signal Ground | Ground |
| 7 | +5V Reference Out | +5V @ 1mA Max. |
| 8 | HV Enable Input | Active Low to Enable the HV |
| 9 | Current Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
| 10 | Current Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
| 11 | Voltage Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
| 12 | HV Enable Output | Active Low HV is Enabled |
| 13 | Signal Ground | Ground |
| 14 | N/C | No Connection |
| 15 | N/C | No Connection |
V6D ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR
| Pin | Signal | Signal Parameters |
|---|---|---|
| 1 | Local Voltage Program | Multi-turn front panel potentiometer |
| 2 | TX Out (optional) | RS232 Receive Data |
| 3 | RX In (optional) | RS232 Transmit Data |
| 4 | Voltage Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
| 5 | Signal Ground | RS232 Ground (optional) |
| 6 | Signal Ground | Ground |
| 7 | +5V Reference Out | +5V @ 1mA Max |
| 8 | HV Enable Input | Active Low to Enable the HV |
| 9 | Current Program Input | 0 to 5V=0 to 100% Rated Output, Zin=20MΩ |
| 10 | Current Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
| 11 | Voltage Monitor | 0 to 5V=0 to 100% Rated Output, Zout=10kΩ |
| 12 | HV Enable Output | Active Low HV is Enabled |
| 13 | +24V Return | Input Voltage Return |
| 14 | +24Vdc Input | Input Voltage 24V±10%, 2A |
| 15 | +24Vdc Input | Input Voltage 24V±10%, 2A |
Tablas y Diagramas
DIMENSIONS: in.[mm]
V6-AC
TOP VIEW
SIDE VIEW
BOTTOM VIEW
V6-DC
TOP VIEW
SIDE VIEW
BOTTOM VIEW
Frequently Asked Questions
What Is a Safe Level of High Voltage?
Where Can I Obtain Information on High Voltage Safety Practices?
What Do You Mean That the Output Side of the High Voltage Cable on Most Standard Products Is “Unterminated”?
How Should I Ground Your Supply?
Why Is Arcing an Issue for a High Voltage Power Supply?
