XRB202 Monoblock® Industrial X-Ray Generators

  • Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
  • Compact & Lightweight
  • Universal Input, Power Factor Corrected
  • Can be Mounted in Any Physical Orientation
  • Analog Monitoring and Standard RS-232 Digital Interface

160kV, 200W X-Ray Source

Spellman’s XRB202 Series of Monoblock® X-Ray sources are designed for OEM applications powering its internal X-Ray tube up to 160kV at 200W. Features like universal input, small package size and a standard analog and RS-232 digital interface simplify integrating the XRB202 into your X-Ray system. Standard models are available either with fan shaped or cone shaped beam geometries. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical applications:

  • X-Ray Scanning: Plating Measurement
  • Food Inspection
  • Fill Level Confirmation
  • Security Applications

CE Marking

사양

(Ref. 128082-001 REV. J)

X-Ray Characteristics:

Tube Type:  Glass tube, Tungsten target, Be filter

Focal Spot:  0.8mm x 0.8mm, 0.5mm x 0.5mm

Beam Filter:  0.016. thick 6061 Al, ±0.0045.

Beam Geometry:  Asymmetrical fan up to 80° x 30°, cone up to 40°

Input Voltage:

90-264Vac, 50/60Hz, 5A maximum

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 80kV to 160kV

X-Ray Tube Current:

0.1mA to 1.2mA, 200W maximum over specified tube voltage range

X-Ray Tube Power:

200W, maximum continuous

Voltage Regulation:

Line: ±0.1% for a ±10% input line change of nominal input line voltage Load: ±0.1% for a 0.1mA to 1.2mA load change

Voltage Accuracy:

Voltage measured across the X-Ray tube is within ±2% of the programmed value

Voltage Risetime:

Ramp time shall be <200ms from 10% to 90% of rated output 

Voltage Overshoot:

Within 5% of rated voltage in <10ms

Voltage Ripple:

1% p p of rated voltage @ =1kHz

Current Regulation:

Line:  ±0.1% for a ±10% input line change of nominal input line voltage

Load:  0.5% @ 80-160kV, 0.1mA to 1.2mA

Current Accuracy:

Current measured through the X-Ray tube is within ±2% of the programmed value

Current Risetime:

<200ms from 10% to 90% of rated output

Arc Intervention:

4 arcs in 10 seconds with a 200ms quench = Shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Analog Interface:

0 to 10Vdc ground referenced signals

Digital Interface:

RS-232 interface.

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.

Interlock Signals:

A hardware interlock function is provided

Operating Temperature:

0°C to +40°C

Storage Temperature:

-40°C to +70°C

Humidity:

10% to 95% relative humidity, non-condensing

Cooling:

Natural convection augmented by customer provided 250cfm cooling fans for 200W operation

Input Line Connector:

6 pin Molex 26-60-4060

Analog Interface Connector:

7 pin Molex 26-60-5070

Digital Interface Connector:

9 pin D connector, female

Grounding Point:

32 ground stud provided on chassis

Dimensions:

18" X 13.5" X 7.63" (458mm X 343mm X 193.80mm)

Weight:

90lbs (40.5kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Not to be greater than 0.5mR/hr at 5cm outside the external surface per FDA 21 CFR 1020.40 and OSHA 29 CFR 1020.96

Regulatory Approvals:

Compliant to 2004/108/EC, The EMC Directive and 2006/95/EC, The Low Voltage Directive

AC INPUT POWER J1 6 PIN CONNECTOR

Pin Signal Parameters
1 Line 90-264Vac
2 Removed N/C
3 Neutral Neutral
4 Removed N/C
5 Spare N/C
6 Spare N/C

RS-232 DIGITAL INTERFACE— JB16 9 PIN FEMALE D CONNECTOR

Pin Signal Parameters
1 N/C No Connection
2 TD Transmit Data
3 RD Receive Data
4 N/C No Connection
5 SGND Signal Ground
6 N/C No Connection
7 N/C No Connection
8 N/C No Connection
9 N/C No Connection

ANALOG INTERFACE— J7 7 PIN MOLEX CONNECTOR

Pin Signal Parameters
1 Ex Gate Low = X-Ray OFF, +12Vdc = X-Ray ON
2 Signal Ground Ground
3 N/C No Connection
4 kV Monitor 0-9 Vdc = 0 to 100% rated output
5 Signal Ground Ground
6 mA Monitor 0 to 9Vdc = 0 to 100% rated output
7 Fault Open collector, 35V @ 10mA max, High = No Fault

LED INDICATORS

Indicator Signal Name Condition Illuminated When...
LED 1 OV High kV occurs
LED 2 UV Low kV occurs
LED 3 UC Low mA occurs
LED 4 OC High mA occurs
LED 5 ARC FLT Arc fault occurs
LED 6 OT Over temperature occurs
LED 7 X-RAY ON X-Rays are enabled
LED 8 PWR Power is ON

테이블 및 다이어그램

DIMENSIONS: in.[mm]

FRONT VIEW

XRB202 X-Ray Generator (Image 2)

BACK VIEW

XRB202 X-Ray Generator (Image 3)

TOP VIEW

XRB202 X-Ray Generator (Image 4)

SIDE VIEW

XRB202 X-Ray Generator (Image 5)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.