V6シリーズ

  • 30KVまでのコンパクトなモジュール
  • 高安定度
  • 低リップルおよび低ノイズ
  • アナログ制御(リモート / ローカル)
  • RS-232制御(デジタルのみ)
  • 電圧および電流モニタ
  • アークおよび短絡保護
  • OEM特注可能

コンパクト30W 高圧電源

V6シリーズは、多くのアプリケーションにおいて非常に優れ た性能と価値を提供する調整された固定出力両極性モジュール高 圧電源のファミリー製品です。

 V6シリーズユニットは、完全に密閉され、システムまたはベ ンチトップ・オペレーション用に設計されています。30kVまで の広範囲の出力電圧が利用可能です。

 出力電圧は内蔵マルチターン・ポテンショメータによってロー カル制御されます。リモート・アナログ電圧または抵抗プログラ ミング能力が、全ての機種に含まれています。アナログ・モニタ 出力も、高電圧および電流出力の両方のリモート・モニタリング に含まれています。

用途

  • 分光計
  • CRT検査
  • 検知器
  • 電子ビーム・システム
  • 一般研究用

ROHS Marking

Specifications

(Ref. 128069-001 REV. G)

Input Voltage:

AC Model: 100-240Vac, ±10%; 50/60 Hertz; 1 amp 
DC Model: 24Vdc ±10%, 2 Amps

Voltage Regulation:

Line: ±0.001% of maximum 90-240Vac input line change ±0.001% of maximum ±10%Vdc input line change 
Load: ±0.002% of maximum for 0 to maximum rated output current change

Current Regulation:

Line: ±0.05% of maximum current for 90-240Vac input line change 0.05% of maximum current for ±10% Vdc input change 
Load: 0.1%% of maximum current for 0 to maximum rated output voltage change

Ripple:

See “model selection” table

Temperature Coefficient:

≤ 50ppm/°C

Stability:

≤ 0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up

Operating Temperature:

0°C to +50°C

Storage Temperature:

-40°C to +85°C

Humidity:

20% to 85%RH, non-condensing 

Local Control:

Internal multi-turn potentiometer for 0 to maximum output voltage (±0.2%)

Remote Programming:

0 to +5Vdc analog input signal proportional to 0 to maxi­mum rated output. Accuracy is ±(0.1% of setting +0.1% of maximum). The programming input impedance is 20 megohms. 

Voltage Monitor:

0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(0.1% of reading +0.1% of maximum).  The monitor impedance is 10 kilohms.

Current Monitor:

0 to +5V proportional to 0 to maximum output voltage. Accuracy is ±(2.0% of reading +1.0% of maximum).  The monitor impedance is 10 kilohms.

Enable:

Remote interlock enables (low) disables internally (high) the high voltage output. Signal is normally high and supply will default to a disabled condition.

Current Limit:

All units provide short circuit current limiting to less than 110% of the maximum rated output current. Supply is self restoring upon removal of cause limit condition. 

Arc/Short Circuit:

Short circuit and arc protected; self restoring.

Cooling:

Convection cooled

Output Connector: 

Models up to and including 5kV use a Spellman P/N JAC high voltage connector.  The required mating connector is a Spellman P/N 105808-384, which is provided. The 10kV through 30kV units use a Spellman P/N JGP high volt­age connector (Alden 8101). All 10 through 30kV units are 1 provided with mating connectors assembled to 2.0 meters 2 of high voltage cable.

Dimensions:

AC Model: 3.05. W X 5.1. H X 7.06. D (77mm X 132mm X 179mm)

DC Model: 2.32. W X 5.1. H X 7.06. D (59mm X 132mm X 179mm)

Weight:

AC Model: 4.5 pounds (2.0kg)

DC Model: 3.75 pounds (1.7kg)

Regulatory Approvals:

RoHS Compliant

OPTIONS

RS - RS-232 Interface

V6A MODEL SELECTION TABLE

V6 AC Series Voltage Current Ripple
V6A1*30 0 to 1kV 0 to 30mA 15mV
V6A1.5*30 0 to 1.5kV 0 to 20mA 15mV
V6A3*30 0 to 3kV 0 to 10mA 30mV
V6A5*30 0 to 5kV 0 to 6mA 50mV
V6A10*30 0 to 10kV 0 to 3mA 200mV
V6A15*30 0 to 15kV 0 to 2mA 450mV
V6A20*30 0 to 20kV 0 to 1.5mA 800mV
V6A30*30 0 to 30kV 0 to 1mA 1.8 volts

*Specify “P” for positive polarity or “N” for negative polarity 

V6D MODEL SELECTION TABLE

V6 DC Series Voltage Current Ripple
V6D1*30 0 to 1kV 0 to 30mA 15mV
V6D1.5*30 0 to 1.5kV 0 to 20mA 15mV
V6D3*30 0 to 3kV 0 to 10mA 30mV
V6D5*30 0 to 5kV 0 to 6mA 50mV
V6D10*30 0 to 10kV 0 to 3mA 200mV
V6D15*30 0 to 15kV 0 to 2mA 450mV
V6D20*30 0 to 20kV 0 to 1.5mA 800mV
V6D30*30 0 to 30kV 0 to 1mA 1.8 volts

*Specify “P” for positive polarity or “N” for negative polarity

V6A ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Local Voltage Program Multi-turn front panel potentiometer
2 TX Out (optional) RS232 Receive Data
3 RX In (optional) RS232 Transmit Data
4 Voltage Program Input 0 to 5V=0 to 100% Rated Output, Zin=20MΩ
5 Signal Ground RS232 Ground (optional)
6 Signal Ground Ground
7 +5V Reference Out +5V @ 1mA Max.
8 HV Enable Input Active Low to Enable the HV
9 Current Program Input 0 to 5V=0 to 100% Rated Output, Zin=20MΩ
10 Current Monitor 0 to 5V=0 to 100% Rated Output, Zout=10kΩ
11 Voltage Monitor 0 to 5V=0 to 100% Rated Output, Zout=10kΩ
12 HV Enable Output Active Low HV is Enabled
13 Signal Ground Ground
14 N/C No Connection
15 N/C No Connection

V6D ANALOG/DIGITAL INTERFACE— J1 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Local Voltage Program Multi-turn front panel potentiometer
2 TX Out (optional) RS232 Receive Data
3 RX In (optional) RS232 Transmit Data
4 Voltage Program Input 0 to 5V=0 to 100% Rated Output, Zin=20MΩ
5 Signal Ground RS232 Ground (optional)
6 Signal Ground Ground
7 +5V Reference Out +5V @ 1mA Max
8 HV Enable Input Active Low to Enable the HV
9 Current Program Input 0 to 5V=0 to 100% Rated Output, Zin=20MΩ
10 Current Monitor 0 to 5V=0 to 100% Rated Output, Zout=10kΩ
11 Voltage Monitor 0 to 5V=0 to 100% Rated Output, Zout=10kΩ
12 HV Enable Output Active Low HV is Enabled
13 +24V Return Input Voltage Return
14 +24Vdc Input Input Voltage 24V±10%, 2A
15 +24Vdc Input Input Voltage 24V±10%, 2A

Tables & Diagrams

DIMENSIONS: in.[mm]

V6-AC 

TOP VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 3)

SIDE VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 5)

BOTTOM VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 7) 

V6シリーズ コンパクト30W 高圧電源 (Image 9)

V6-DC 

TOP VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 4)

SIDE VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 6)

BOTTOM VIEW

V6シリーズ コンパクト30W 高圧電源 (Image 8)

V6シリーズ コンパクト30W 高圧電源 (Image 10)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.