PCM シリーズ

  • 出力電圧 1kV 〜70kV
  • アーク/短絡保護
  • 低蓄積エネルギー
  • 出力電流および電圧のテスト・ポイント
  • イネーブル/インヒビット信号による出力制御
  • 安全インターロック回路
  • OEM特注可能

120W 高圧電源

 PCMシリーズは、1kV〜70kVの高圧を出力します。PCMシ リーズはユニバーサル入力(85〜265Vac)と力率0.99の回路 を備えています。この極性固定タイプモジュール(ご注文時に正 または負をご指定下さい。)は、自動クロスオーバーで電圧と電流 を制御し、高精度アプリケーションに最適です。またアークと短 絡保護を備えた設計で過酷な環境下での動作を可能にし す。

用途

  • 電気泳動装置
  • 検出器アレー
  • 静電紡糸
  • Hi-Pot試験
  • ケーブルテスト

CE RU Marking

Specifications

(Ref. 128006-001 REV. M)

Input:

85-265Vac, 47-63Hz, power factor corrected.

UL® rated for 85-250Vac input for 1kV to 5kV models.

Power Factor (Typical):

FL: 0.99

NL: 0.98

Efficiency:

80 to 85%, typical

Output:

11 models from 1kV to 70kV. Positive or negative polarity outputs, specify at time of order.

Voltage Regulation:

Load: 0.01% of output voltage, no load to full load.

Line: ±0.01% for ±10% change in input voltage.

Current Regulation:

Load: 0.01% of output current from 0 to rated voltage. Line: 0.01% of rated current over specified input range.

Ripple:

0.1% p-p of maximum output voltage.

Voltage Stability:

0.02% per 8 hours.

Temperature Coefficient:

100ppm per °C, voltage or current regulated.

Environmental:

Operational: 0 to 40°C

Storage: -40°C to +85°C

Humidity: 0 to 90%, non-condensing 

Dimensions:

1kV to 50kV: 3.65”H x 5”W x 9”D (9.27cm x 12.7cm x 22.9cm). 

60, 70kV: 3.65”H x 5”W x 11”D (9.27cm x 12.7cm x 27.9cm).

Weight:

7 pounds (3.18kg)

AC Input Connectors:

IEC320 with mating cable.

Interface Connector:

15 pin D connector.

HV Output Cable:

Spellman Delrin type connector with 36” (91.4cm) shielded cable.

Front Panel Ground Connection:

Threaded 8-32 ground stud

Regulatory Approvals:

Compliant to 2014/30/EU, the EMC Directive and 2014/35/EU, the Low Voltage Directive.

PCM SELECTION TABLE

Maximum Rating Model Number  
kV mA  
1 120 PCM 1*120
3 40 PCM 3*120
5 24 PCM 5*120
10 12 PCM 10*120
15 8 PCM 15*120
20 6 PCM 20*120
30 4 PCM 30*120
40 3 PCM 40*120
50 2.4 PCM 50*120
60 2.0 PCM 60*120
70 1.7 PCM 70*120

 *Specify “P” for positive polarity or “N” for negative polarity.

PCM D CONNECTOR 15 PIN

Pin Signal Parameters
1 Remote mA Program 0 to 10Vdc = 0 to 100% of rated output
2 Remote kV Program 0 to 10Vdc = 0 to 100% of rated output
3 High Voltage Enable/Inhibit Open = HV Inhibit, Ground = HV ON
4 mA Monitor 0 to 10Vdc = 0 to 100% of rated output
5 Interlock Return Connect to pin 6 to close interlock circuit
6 Interlock Out Connect to pin 5 to close interlock circuit
7 kV Monitor 0 to 10Vdc = 0 to 100% of rated output
8 Local kV Program Multi-turn front panel pot (screwdriver)
9 Power Supply Fault 0Vdc = No Fault, +15Vdc @ 1mA = Fault
10 +10Vdc Reference +10Vdc @ 1mA maximum
11 Signal Ground Signal Ground
12 Spare No Connection
13 Spare No Connection
14 Spare No Connection
15 Local mA Program Multi-turn front panel pot (screwdriver)

Tables & Diagrams

DIMENSIONS: in.[mm]

SIDE VIEW

PCM シリーズ 120W 高圧電源 (Image 2)

BACK VIEW

PCM シリーズ 120W 高圧電源 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.