(Ref. 128037-001 REV. J)
+24 Vdc, ±1.2Vdc
≤ 3.0 amps
+245 volts, fixed, accuracy <±10%
-245 volts, fixed, accuracy <±10%
+1350 volts, fixed, accuracy <±7%
-1350 volts, fixed, accuracy <±7%
15mA maximum for each output
Line Regulation: (typical)
±1 volt all outputs
Load Regulation: (typical)
±3% all outputs
Output Current Limit:
An auto-recovering short circuit fold back limit is employed. Fully arc protected, capable of 10 arcs in 5 seconds.
≤ 0.1% p-p of full rated output voltage
≤ 0.25% per hour, constant operating conditions after 1 hour warm up.
Under Voltage Shutdown:
The power supply will shut down when an input under voltage condition is detected. When the input voltage is restored above 11.8 volts, operating the enable pin will reset this fault.
≤ 200ppm per degree C
Operating: 0°C to 50°C
Storage: -35°C to 85°C
10% to 90% RH, non-condensing
Unit must be mounted in free air, in any position with the exception of inverted (pins up). Forced air cooling is recommended.
0.984. H X 4.331. W X 3.150. D (25mm x 110mm x 80mm) Width does not include mounting tab
7.27 oz. (206g)
Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive.