SERIE XRB701

  • Fuente de alto voltaje con alimentación de filamento, tubo de rayos X, puerto de haz y electrónica de control integrados
  • Compacta y ligera
  • Factor de potencia corregido
  • Se puede montar en cualquier orientación física
  • Interfaz digital estándar RS-232

FUENTE DE RAYOS X DE 160 KV, 700 W

La serie XRB701 de fuentes de rayos X Monoblock® de Spellman está diseñada para aplicaciones de OEM en las cuales se energiza su tubo interno de rayos X con hasta 160 kV a 700 W Las funciones tales como el tamaño compacto y la interfaz digital RS-232, simplifican la integración de la XRB701 en su sistema de rayos X. El circuito de control de emisión de diseño propio proporciona una regulación excelente de la corriente del tubo de rayos X, además de una sobresaliente estabilidad y desempeño.

Aplicaciones típicas:

  • Barrido con rayos X: inspección de alimentos
  • Confirmación de nivel de llenado
  • Aplicaciones de seguridad

Especificaciones

(Ref. 128088-001 REV. F)

X-Ray Characteristics:

Tube Type: Glass tube, Tungsten target, Be filter

Focal Spot: 2.5mm x 2.5mm (IEC 60336)

Beam Filter: 1.5mm glass, 9-26mm oil, 0.4mm Al

Beam Geometry:  Asymmetrical fan 93° x 15°

Input Voltage:

230Vac, ±15%, 50/60Hz, 5A max

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 80kV to 160kV

X-Ray Tube Current:

0.25mA to 6mA over specified tube voltage range

X-Ray Tube Power:

700W, maximum continuous

Voltage Regulation:

Line: ±0.1% ±10%

Load: ±0.1% 0.25 to 6mA

Voltage Accuracy:

Voltage measured across the X-Ray tube is within 1% of the programmed value

Voltage Risetime:

  Ramp time shall be 500ms nominal, 1 second maximum from 10% to 90% of rated output

Voltage Overshoot:

  Within 5% of rated voltage

Voltage Ripple:

  1% p-p of rated voltage

Current Regulation:

Line: ±0.5% ±10%

Load: ±0.5% 0.25 to 6mA

Current Accuracy:

Current measured through the X-Ray tube is within 5% of the programmed value

Current Risetime:

500ms nominal, 1 second maximum

Arc Intervention:

4 arcs in 10 seconds = shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Digital Interface:

RS-232 interface.

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.

Interlock Signals:

A hardware interlock function is provided

Operating Temperature:

5°C to +40°C

Storage Temperature:

-25°C to +65°C

Humidity:

10% to 90% relative humidity, non-condensing

Cooling:

Heat exchanger w/fan and oil pump, powered from AC

Input Line Connector:

5 pin Molex 26-60-4050

Cooling Power Connector:

4 pin Tyco 206061-1

Digital Interface Connector:

9 pin D connector, female

Grounding Point:

M5 ground stud provided on chassis

Dimensions:

See drawing

Weight:

140lbs ±10lbs (64kg ±4.5kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Less than 300uR/hr at a distance of 10cm from all surfaces while operating at 160kV @ 4.3mA

Special Features:

Stationary or rotating CT application up to 100rpm

AC INPUT POWER J1 5 PIN CONNECTOR (MOLEX 26-60-4050)

Pin Signal Parameters
1 Line 230Vac Input
2 Line 230Vac Input
3 N/C No Connection
4 Neutral 230Vac Neutral
5 Neutral 230Vac Neutral

COOLING POWER J2 4 PIN CONNECTOR (TYCO 206061-1)

Pin Signal Parameters
1 Line 230Vac Input
2 N/C No Connection
3 Neutral 230Vac Neutral
4 GND Chassis Ground

RS-232 DIGITAL INTERFACE— J5 9 PIN FEMALE D CONNECTOR

Pin Signal Parameters
1 N/C No Connection
2 TX Transmit Data
3 RX Receive Data
4 N/C No Connection
5 SGND Signal Ground
6 N/C No Connection
7 N/C No Connection
8 N/C No Connection
9 N/C No Connection

Tablas y Diagramas

DIMENSIONS: in.[mm]

TOP VIEW

XRB701 X-Ray Generator (Image 2)

SIDE VIEW

XRB701 X-Ray Generator (Image 3)

BOTTOM VIEW

XRB701 X-Ray Generator (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.