uXRB130P65

Integrated X-Ray Tube and Control Electronics in One Compact Assembly
Standard RS-232 Digital Interface Offers Access to Diagnostics and Operating Logs
Standard Windows Test GUI
7 Micron Focal Spot for Narrow Beam
8 Micron Focal Spot for Wide Beam
10mm/14mm Spot to Window Spacing Provides High Geometric Magnification

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

Data Sheet

130kV @ 65W X-Ray Source

Spellman’s μXRB130P65 microfocus Monoblock® X-Ray sources are designed for high resolution imaging applications powering its internal microfocus X-Ray tube up to 130kV @ 65W. Features like 24Vdc input voltage, small package size and standard RS-232 digital interface simplify integrating the μXRB130P65 into your X-Ray system. The small, round focal spot size, optimized over the range of operating voltage, and high magnification, combined with stable high intensity output provides distortion free, superior quality 2D and 3D images.

Typical applications

Industrial X-Ray:

Circuit board and electronic component inspection
High resolution Non Destructive Testing of metal and plastic parts
Micro CT for Industrial applications
Battery inspection

Medical X-Ray:

Micro CT for life sciences applications

사양

^{(Ref. 128082-001 REV. E)}

Options:

WB Wide Beam

ET Extended Tube (wide beam only)

LW Light Weight

The uXRB130P65 is ideal for applications such as printed circuit board inspection, battery inspection and industrial/medical micro CT.

Specifications:

Narrow Beam Benefits (Standard):

The small round spot is optimized over the range of kV and power to provide distortion free images. Operated at 4 watts yields a 6 micron spot for high resolution imaging. The 14mm spot to window spacing offers high geometric magnification.

Narrow Beam X-Ray Characteristics (Standard):

Spot Ellipticity: ±20% @ 16 watts, 130kV (either axis referred to average)

Beam Geometry: ≥ 53°, round beam, uniform beam profile in any direction

Spot to Window Spacing: 14mm ±0.5mm

Window Diameter ≈19mm

Window Material and Thickness: Beryllium, 0.25mm

Target Material: Tungsten

Wide Beam Benefits (WB Option):

The 115 degree round beam is well suited for automated
inspection where a large field of view is required for maximum throughput or off angled views. The 10mm spot to window spacing provides superior high geometric
magnification.

Wide Beam X-Ray Characteristics (WB Option):

Voltage measured across the X-Ray tube is within ±2% of the programmed value

Spot Ellipticity:

±20% @ 16 watts, 130kV (either axis referred to average)

Cone of Illumination: 115°, round beam, uniform beam profile in any direction

Spot to Window Spacing: 10mm ±0.5mm

Window Diameter (uncollimated): ≈38mm

Window Material and Thickness: Beryllium, 0.51mm

Target Material: Tungsten

X-Ray Leakage: Behind X-Ray tube is ≤0.5mR/hr at 2.55cm

Input Voltage:

+24-27Vdc

Input Current:

<6 amps

Anode Supply:

Output Voltage: 20kV to 130kV (referenced to Cathode Gun Supply)

Output Current: up to 0.5mA, from 20kV to 130kV

Environmental:

Operating Temperature: 0°C to +32°C

Storage Temperature: -20°C to +70°C

Humidity: 0 to 95%, non-condensing

Altitude: Up to 5,000 feet (1524 meters)

Cooling:

Internal fan is incorporated. Adequate air circulation around unit must be provided.

Digital Interface:

RS-232

Analog Interface:

0 to 10Vdc ground referenced signals

Digital Interface:

RS-232 interface.

Mechanical:

See drawings

Weight:

Standard: 30lbs. (13.60kg)

Standard/Extended Tube: 34lbs. (15.40kg)

Light Weight (LW option): 23lbs. (10.43kg)

Light Weight/Extended Tube: 27lbs. (12.24kg)

Regulatory Approvals:

Compliant to EEC EMC Directive.

Compliant to EEC Low Voltage Directive.

Graphical User Interface

J1 INPUT/OUTPUT—16 PIN AMP #206036-1 CONNECTOR

Pin	Signal	Parameters
1	Chamber Interlock Out	To close Chamber Interlock connect pin 1 to pin 2, R<2Ω
2	Chamber Interlock In	To close Chamber Interlock connect pin 2 to pin 1, R<2Ω
3	X-Ray ON Lamp Out	120Vac @ 3A/250Vac @ 1.5A rated contacts. Close at X-Ray ON
4	X-Ray ON Lamp In	120Vac @ 3A/250Vac @ 1.5A rated contacts. Close at X-Ray ON
5	N/C	N/C
6	Prime Power Interlock Out	To close Power Interlock connect pin 6, 7 to pin 8, 10, R<2Ω
7	Prime Power Interlock Out	To close Power Interlock connect pin 6, 7 to pin , R<2Ω
8	Prime Power Interlock In	To close Power Interlock connect pin 8, 10 to pin 6, 7, R<2Ω
9	N/C	N/C
10	Prime Power Interlock In	To close Power Interlock connect pin 8, 10 to pin 6, 7, R<2Ω
11	+24Vdc Input (+)	+24Vdc Input (+)
12	+24Vdc Input (+)	+24Vdc Input (+)
13	+24Vdc Return (-)	+24Vdc Return (-)
14	+24Vdc Return (-)	+24Vdc Return (-)
15	X-Ray On Indicator Out	24Vdc @ 3A rated contacts. Close at X-Ray On
16	X-Ray On Indicator In	24Vdc @ 3A rated contacts. Close at X-Ray On

J2 RS-232 DIGITAL INTERFACE—9 PIN AMP #788903-1 CONNECTOR

Pin	Signal	Parameters
1	DCD	Data Carrier Detect
2	RD	Received Data
3	TD	Transmitted Data
4	DTR	Data Terminal Ready
5	SGNO	Signal Ground
6	DSR	Data Set Ready
7	RTS	Request to send
8	CTS	Clear to Send
9	RI	Ring Indicator

SPOT TABLE

PARAMETER	NARROW BEAM	WIDE BEAM
Operating Voltage Range	45-130kV	50-130kV
Maximum Power	65W, 130kV	65W, 130kV
Maximum Beam Current	0.500mA	0.500mA
Spot Size 4 Watt	≤ 7μ, 45-130kV	≤ 8μ, 50-130kV
Spot Size 8 Watt	≤ 10μ, 45-130kV	≤ 14μ, 50-130kV
Spot Size 16 Watt	≤ 22μ, 45-130kV	≤ 24μ, 50-130kV
Spot Size 32 Watt	≤ 48μ, 70-130kV	≤ 48μ, 70-130kV
Spot Size 40 Watt	≤ 60μ, 80-130kV	≤ 60μ, 80-130kV
Spot Size 65 Watt	≤ 100μ, 130kV	≤ 100μ, 130kV