MSA系列是紧凑的可安装在印刷电路板(PCB)上高压电源模块。

  • 紧凑型高性能模块
  • 可变电压编程
  • 输出功率 0.9W
  • 电压检测
  • 电弧和短路保护

*注意:所有规格如有更改,恕不另行通知。请参阅数据表的 英文PDF版本以获得最新修订。

 

RoHs Compliant logo

MSA系列是紧凑的可安装在印刷电路板(PCB)上高压电源模块。

MSA 系列是紧凑型印刷电路板可安装 (PCB) 高压电源模块,从1kV 至 3kV,可选正的或负的输出极性。MSA 系列的特点是 0-10Vdc 可变电压编程等于 0-100% 额定输出电压。提供一个电压监测,0-10Vdc 等于 0-100% 的额定输出电压。此外,状态信号和使能信号提供对电源的简单控制。所有的电源都有内置的故障保护。

MSA 系列适用于需要紧凑型高性能 PCB 可安装电源的场合,比如驱动质谱仪中的电子倍增器。铝制外壳有助于屏蔽此单元减少辐射噪声。

典型应用

  • 光电倍增管
  • 电子倍增器
  • 质谱分析
  • 静电透镜
  • 核仪器

规格

(Ref. 128018-001 REV. C)

SPECIFICATIONS

Input Voltage:

+24 Vdc, ±2Vdc

Input Current: 

150mA maximum input current
30mA pk-pk maximum input current ripple

Output Polarity: 

Positive or negative, specify at time of order

Output Power: 

0.9 watts, maximum

Output Voltage Accuracy: 

±1%

Voltage Regulation:

Line: 21.6Vdc to 26.4Vdc, ±0.02%
Load: 0-100% rated load, ±0.02%

Stability: 50ppm/8hrs after one hour warm up period 

Temperature Coefficient:

25ppm per degree C

Settling Time: After Power On or Enable

100 milliseconds, typical
When power is removed the unit will decay to <±60 volts within 2 seconds

Protection:

Arc and short circuit protected.
Not designed to withstand continuous arcing

Environmental:

Temperature Range: 
Operating: 0˚C to 60˚C
Storage: -20˚C to 70˚C

Humidity:
95% RH, non-condensing 

Cooling: Convection cooled 

Dimensions:

 2.73˝ L x 2.21˝ W x 1.21˝ D (69.4mm x 56.2mm x 30.7mm)

Weight: 

7.0 oz. (200g)

Regulatory Approvals: 

Designed to meet EN 61010-1, UL 61010A-1 and CAN/CSA-22.2 No. 61010.1 As the unit is intended for incorporation into end users equipment it will not be tested as a standalone unit to meet the EMC directive. The user will need to follow sensible EMC precautions in using the unit. The unit is compliant with the EU RoHS directive

 

 

MSA SELECTION TABLE

Model Output Voltage Output Current Ripple (Vpp)
MSA1*24 0-1kV 0-900μA 30mV
MSA2*24 0-2kV 0-450μA 40mV
MSA3*24 0-3kV 0-300μA 50mV

1) Replace the * with “P” for positive output polarity and “N” for negative output polarity.

2) The ripple figure includes random non switch related noise, noise related to the oscillator, switching and feedback control circuitry and noise associated with the rectified primary switching frequency.

 

LOW VOLTAGE SIGNAL PINS FOR POWER AND CONTROL

PIN SIGNAL LEVEL SIGNAL PARAMETERS
1 Enable TTL Enable = Low (≤1.2V). Disable = High
(≥2.4V), when Enable pin is NC, 10kΩ pull
up to +5V ±10%
2 Status 0V/5V OK = 11kΩ pull up to +5.1V ±10%. Fault =
≤0.1V, Zout = 1kΩ
3 Voltage Program 0-10V 0 to +10Vdc = 0 to 100% rated output voltage, Accuracy ≈ ±1%. Zin = 10kΩ
4 Voltage Monitor 0-10V 0 to +10Vdc = 0 to 100% rated output voltage, Accuracy = ±2%. Zout = 20kΩ
5 Input Voltage 24Vdc Power Input
6* Signal Ground 0V Ground reference for control and
monitoring signals
7* Power Ground 0V Power Return

To reset the unit after a fault condition, Pin1 (Enable) must be set high for at least 10 seconds

* pins 6 & 7 are linked internally

 

HIGH VOLTAGE CONNECTION DETAIL

PIN SIGNAL SIGNAL PARAMETERS
8 High Voltage Output 0-100% Rated Output. !!Danger: High Voltage!!

 

表和图