XRV I/O

  • 电源至冷却器/ 冷却装置,XRV 发生器和XRV 触屏控制器
  • 集成所有必须的安全机构至X 射线系统环境,以满足国际标准。
  • X 射线开启灯、预热灯和安全电路灯
  • 监测球管冷却和门互锁
  • 提供机架式和壁挂式版本
  • 提供故障安全互锁选项

XRV 输入/输出 X射线系统接口盒

斯派曼可选的XRV I/O 盒子是用于集成XRV X 射线发生器至系统环境的理想配件。XRV 现在可以很容易地与工业标准的金属陶瓷X 射线管、冷却器和冷却装置安装在一起,同时满足所有必须的安全和互锁需求。XRV I/O 盒子能够适应许多控制接口选项,并能安装在机架里或墙面布置,最适合集成系统布置要求。

典型应用:

  • 配电系统组件

ROHS Marking

规格

(Ref. 128112-001 REV. A)

Input Voltage:

180-264Vac, 50/60Hz

Operating Temperature:

0°C to +50°C

Storage Temperature:

-20°C to +80°C

Humidity:

0% to 95% relative humidity, non-condensing

Cooling:

Convection

Dimensions:

19.0"W X 5.21"H X 18.00"D (482.6mm X 132.33mm X 330.2mm)

Weight:

30lbs (11.19kg)

Regulatory Approvals:

RoHS compliant.

Typical system set-up:

XRV 输入/输出 X射线系统接口盒 (Image 1)

XRV I/O BOX SELECTION TABLE

MODELNUMBER DESCRIPTION
XRV-9-1 XRV I/O Box - Rack mount without XRV controller
XRV-9-2 XRV I/O Box - Rack mount with XRV controller
XRV-9-3 XRV I/O Box - Wall mount without XRV controller
XRV-9-4 XRV I/O Box - Wall mount with XRV controller

TB1, TB2, TB3-MAIN AC INPUT POWER—

PIN SIGNAL PARAMETERS
TB1-1 Line 1 180 - 264Vac
TB2-1 Line 2 Neutral or 180 - 264Vac
(3 phase source)
TB3-1 GND Ground

TB4- COOLER / CHILLER—MAINS AC OUTPUT

PIN SIGNAL PARAMETERS
1 Line 1 180 - 264Vac
2 Line 2 180 - 264Vac or Neutral
3 GND Ground

TB5-COOLER / CHILLER INTERLOCKS

PIN SIGNAL PARAMETERS
1 Flow INTLK Dry contacts, ≤24Vdc
2 Common Dry contacts, ≤24Vdc
3 Temp INTLK Dry contacts, ≤24Vdc

TB6-LOW VOLTAGE / DOOR INTERLOCKS

PIN SIGNAL PARAMETERS
1 Door INTLK Dry contacts, ≤24Vdc
2 Door INTLK Dry contacts, ≤24Vdc

TB7-XRV I/O MAINS TO CDRH* SAFETY INTERLOCK

PIN SIGNAL PARAMETERS
1 Power INTLK Line 1 OUT 180 - 264Vac
2 Line 1 IN 180 - 264Vac
3 Power INTLK Line 2 OUT Neutral or 180 - 264Vac
(3 phase source)
4 Line 2 IN Neutral or 180 - 264Vac
(3 phase source)
5 GND Ground

TB8-XRV AUX AC OUTPUT—TO XRV JB1

PIN SIGNAL PARAMETERS
A Line 1 180 - 264Vac
B Line 2 Neutral or 180 - 264Vac
(3 phase source)
C GND Ground

TB9-XRV I/O TO XRV CONTROLLER INTERFACE

PIN SIGNAL PARAMETERS
1 Line 1 180 - 264Vac
2 Line 2 Neutral or 180 - 264Vac
3 GND Ground
4 INTLK 1 Dry contacts, ≤24Vdc
5 INTLK 2 Dry contacts, ≤24Vd
6 INTLK Common Common for INTLK 1, 2
7 X-Ray ON Light Dry contacts, ≤24Vdc
8 Pre-Warn Light Dry contacts, ≤24Vdc
9 Light Common Light common
10 Key Switch 2 Dry contacts, ≤24Vdc
11 Key Switch 3 Dry contacts, ≤24Vdc
12 Key Switch Common Key common

TB11-X-RAY ON / PRE-WARN LIGHTS

PIN SIGNAL PARAMETERS
1 X-Ray ON Light 180 - 264Vac, 5 amp
2 X-Ray ON Light 180 - 264Vac, 5 amp
3 Pre-Warn Light 180 - 264Vac, 5 amp
4 Pre-Warn Light 180 - 264Vac, 5 amp

表和图

XRV 输入/输出 X射线系统接口盒 (Image 2)

DIMENSIONS: in.[mm]

XRV 输入/输出 X射线系统接口盒 (Image 3)

XRV 输入/输出 X射线系统接口盒 (Image 4)

XRV 输入/输出 X射线系统接口盒 (Image 5)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.