UM8-40 系列

  • 提供九种型号,电压范围从8kV 至40kV。固定的负极性或正极性
  • 可提供的输出功率为4W、15W和30W
  • 通过自动交叉控制进行电压 / 电流调节
  • 电压和电流监测信号
  • 电弧和短路保护
  • 精准的+5V 参考输出
  • 通用的标准接口
  • CE 已登记注册并符合RoHS

直流-直流高压电源

集形状、贴装和功能于一体的设计:

斯派曼UM8-40 系列的印刷电路板可贴装高压模块,集形状、贴装和功能于一体,可替代目前市面上使用的电源,同时具有更多的功能,价格更具有竞争优势。使用专有的功率转换技术和斯派曼六十多年高压经验,这些基于SMT 高压模块与竞争产品相比,性能更好、可靠性更高、与系统集成更方便、价格更低。

先进的功率转换拓扑技术:

UM8-40 转换器使用专有的零电压切换功率转换拓扑技术,使其具有卓越的效率及低噪声与低纹波。与传统转换拓扑相比辐射大大减少。有效地降低屏蔽邻近电路的需求,甚至不需要屏蔽。

高压输出通过使用铁氧体磁芯的高压升压变压器产生,运用一组半波科克罗夫特—瓦尔顿电压倍增器来获得指定的高压输出。

由于具有固定的高频转换率,其输出电容很小,因此存储能量最低。通过使用宽大的额定浪涌限流电阻和一个快速电流环路,所有电源均受到全面的电弧和短路保护。

控制和调节:

实际输出电压通过一个高阻抗分压器来输出一个电压反馈信号. 电流反馈信号是通过一个电流传感电阻在高压输出电路的低端返回输出。这两个精准的对地参考反馈信号除外部监测用途外习惯于精确地调控电源。

UM8-40 独特的转换拓扑技术,使得电源能够满电流工作在低阻抗负载甚至一个短路电路中。标准的电源限制在最大额定输出电流的103%。

标准接口:

UM8-40 系列接口提供电流编程能力、正极性、带缓冲、低输出阻抗,电压和电流监测信号( 零至+4.64Vdc 等于零至额定满量程)。还提供电压编程输入,0 至+4.64Vdc 等于0 至100% 的额定电压。

电流编程允许用户去设置这个电源的电流限制, 从0 至100% 的最大额定电流均可。此功能对于需求小于满输出电流是有用的,如在保护一个敏感的负载的情况下。

缓冲的低阻抗电压和电流监测信号能直接驱动外部电路,同时将负载和传感效应降至最低。这些功能节省了用户的费用和外部接口缓冲电路的实现,同时提高了整个信号的完整性。

标准接口由一排13 个引脚构成,引脚间距为0.1˝。一个传统接口( 7 个引脚,引脚间距为0.2˝ ) 是与目前可用的商业制成相配的,电源能通过订购“L” 选项提供。

机械和环境的考虑因素:

UM8-40 系列是固态封装的、可安装的印刷电路板、塑料壳转换器。所有电源使用基于硅灌封材料封装,比环氧树脂封装技术重量更轻。使用独立的、非接地的2-56 机械螺丝把模块安全地安装到印刷电路板,缓解了接口引脚承担的一些应力。安装板、支架和法兰安装选项也是可用的。高压输出是通过一根最小长度为 36˝ (914.4mm) 的高压线提供。

合规认证:

符合EMC 2004/108/EC 指示和低压2006/95/EC 指示。UL/CUL 认证,文件E227588。符合RoHS。

规格

(Rev. 128074-001 REV. L)

Input Voltage: 

12Vdc for 4W, 24Vdc for 15W and 30W 

Nominal Voltage Range: 

11Vdc to 30Vdc for 4W, 23Vdc to 30Vdc for 15W and 30W 4W units can operate at 24Vdc input with no deratings or damage to unit 

Input Current: (typical) 

Disabled: 10mA @ 24Vdc

Full output, no load: 160mA @ 24Vdc, 300mA @ 12Vdc

Full output, full load: 

4 watt units: 330mA @ 24Vdc, 640mA @ 12Vdc

15 watt units: 850mA @ 24Vdc

30 watt units: 1590mA @ 24Vdc 

Voltage Regulation: 

Line: <0.01% Load: <0.01% 

Current Regulation: 

Line: <0.01% Load: <0.01% 

Stability: 

0.01% per 8 hours, 0.02% per day after 30 min. warmup 

Accuracy: 

2% on all programming and monitoring, except I Sense 10% 

Temperature Coefficient: (typical) 

Standard: 100ppm/°C 

Optional: 25ppm/°C (T Option)

Environmental: 

Temperature Range: 

Operating: -40°C to 65°C case temperature 
Storage: -55°C to 105°C, non operational

Humidity: 10% to 90%, non-condensing. 

Cooling: 

Convection cooled, typical. 30 watt units operating at full power might require additional cooling to maintain case temperature below 65°C. Methods may include: forced air cooling, use of heat sink or metal case, etc. It is the user’s responsibility to maintain the case temperature below 65°C. Damage to the power supply due to inadequate cooling is considered misuse and repairs will not be covered under warranty.  

Dimensions: 

8kV-12kV: 3.700. L X 1.500. W X 0.990. H (93.98mm X 38.10mm X 25.03mm)

15kV-20kV: 4.700. L X 1.500. W X 0.990. H (119.38mm X 38.10mm X 25.03mm)

25kV-40kV: 6.960. L X 1.600. W X 1.14. H (176.78mm X 40.84mm X 28.87mm) 

Weight: 

8kV-12kV:  5.7 ounces (162 grams), typical  
15kV-20kV:  7.2 ounces (204 grams), typical  
25kV-40kV:  13.1 ounces (371 grams), typical

Output Cable:

UM8, UM10, UM12, UM15: TV20 (min. length, 36. (914.4mm)

UM20, UM25: TV30 (min. length, 36. (914.4mm)

UM30, UM35, UM40: TV40 (min. length, 36. (914.4mm)

See product PDF for more specification and features.

UM 4W, 8kV TO 40kV SELECTION TABLE

Model Number Output V Output Current Ripple(max) %Vp-p Output Capacitance Arc Limiting Resistance I Sense Scaling Full Scale Signal High Voltage Divider Resistance
UM8*4 0 to 8kV 0.5mA 0.05 6830pF 50kΩ 5V 200MΩ
UM10*4 0 to10kV 0.4mA 0.05 4380pF 50kΩ 2.4V 300MΩ
UM12*4 0 to 12kV 0.333mA 0.05 4380pF 50kΩ 3.33V 300MΩ
UM15*4 0 to 15kV 0.266mA 0.05 3220pF 100kΩ 1.69V 400MΩ
UM20*4 0 to 20kV 0.2mA 0.05 2310pF 100kΩ 1.316V 550MΩ
UM25*4 0 to 25kV 0.16mA 0.05 1540pF 100kΩ 1.1V 800MΩ
UM30*4 0 to 30kV 0.133mA 0.05 1370pF 120kΩ 0.95V 900MΩ
UM35*4 0 to 35kV 0.115mA 0.05 1370pF 140kΩ 0.72V 900MΩ
UM40*4 0 to 40kV 0.1mA 0.05 1370pF 140kΩ 1.3V 900MΩ

UM 15W, 8kV TO 40kV SELECTION TABLE

Model Number Output V Output Current Ripple(max) %Vp-p Output Capacitance Arc Limiting Resistance I Sense Scaling Full Scale Signal High Voltage Divider Resistance
UM8*15 0 to 8kV 1.875mA 0.05 6830pF 50kΩ 3.75V 200MΩ
UM10*15 0 to 10kV 1.5mA 0.05 4380pF 50kΩ 8.152V 300MΩ
UM12*15 0 to 12kV 1.25mA 0.05 4380pF 50kΩ 5V 300MΩ
UM15*15 0 to 15kV 1mA 0.05 3220pF 100kΩ 5.53V 400MΩ
UM20*15 0 to 20kV 0.75mA 0.05 2310pF 100kΩ 4.21V 550MΩ
UM25*15 0 to 25kV 0.6mA 0.05 1540pF 100kΩ 3.42V 800MΩ
UM30*15 0 to 30kV 0.5mA 0.05 1370pF 120kΩ 2.89V 900MΩ
UM35*15 0 to 35kV 0.429mA 0.05 1370pF 140kΩ 2.39V 900MΩ
UM40*15 0 to 40kV 0.375mA 0.05 1370pF 140kΩ 4.21V 900MΩ

UM 30W, 8kV TO 40kV SELECTION TABLE

Model Number Output V Output Current Ripple(max) %Vp-p Output Capacitance Arc Limiting Resistance I Sense Scaling Full Scale Signal High Voltage Divider Resistance
UM8*30 0 to 8kV 3.75mA 0.05 6830pF 50kΩ 5.36V 200MΩ
UM10*30 0 to 10kV 3mA 0.05 4380pF 50kΩ 7.87V 300MΩ
UM12*30 0 to 12kV 2.5mA 0.05 4380pF 50kΩ 5V 300MΩ
UM15*30 0 to 15kV 2mA 0.05 3220pF 100kΩ 5.29V 400MΩ
UM20*30 0 to 20kV 1.5mA 0.05 2310pF 100kΩ 8.15V 550MΩ
UM25*30 0 to 25kV 1.2mA 0.05 1540pF 100kΩ 6.56V 800MΩ
UM30*30 0 to 30kV 1mA 0.05 1370pF 120kΩ 5.52V 900MΩ
UM35*30 0 to 35kV 0.857mA 0.05 1370pF 140kΩ 4.66V 900MΩ
UM40*30 0 to 40kV 0.75mA 0.05 1370pF 140kΩ 8.15V 900MΩ

STANDARD INTERFACE

Pin Signal Parameters
1 Power Ground Return +12Vdc or +24Vdc power return/HV return
1A Signature Resistor Unique Identifying resistor connected to ground
2 + Power Input +12Vdc or +24Vdc power input
2A OT Output +5Vdc @ 1mA = Over Temp fault
3 I Sense See I Sense text and tables for details
3A I Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10kΩ
4 Enable Input Low (<0.7V, Isink@1mA)=HV OFF,
High (open or >2V)=HV ON
4A V Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10kΩ
5 Signal Ground Signal Ground
5A I Pgm 0 to 4.64Vdc = 0 to 100% rated output. Zin > 47kΩ
Leave open for preset current limit @103% of rated output current
6 Remote Adjust Positive Polarity Unit:
0 to +4.64VDC = 0 to 100% rated voltage,
Zin >1MΩ
Negative Polarity Unit:
+5VDC to 0.36V = 0 to 100% rated voltage,
Zin >100kΩ
Leave open if pin 6A (VPgm) is used for programming
6A V Pgm 0 to 4.64Vdc = 0 to 100% rated voltage. Zin > 100kΩ Leave open if pin 6 (remote adjust) is used for programming
7 +5V Reference Output +5Vdc ±1%, 25ppm/°C. Zout =475Ω
8 HV Ground Return HV Ground Return
9 E Out Monitor 1000:1 ratio. Polarity of Voltage Monitor signal equals polarity of unit. Accuracy is ±2%, 100ppm/°C. Calibrated with DVM with 10MΩ input impedance

表和图

DIMENSIONS: in.[mm]

15 PIN - Standard Interface

UM8-40 系列直流-直流高压电源 (Image 9) 

9 PIN - Legacy Interface

UM8-40 系列直流-直流高压电源 (Image 10)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.