SL2KW

  • 结构紧凑、重量轻
  • 低的电磁干扰和射频干扰
  • 电压范围从500V至50kV
  • 一直到8kV 可逆极性输出
  • 系统状态指示
  • 通用的模拟和数字接口
  • 电弧灭弧/电弧计数/电弧跳闸
  • 提供OEM 定制
2 Year Extended Warranty

斯派曼 SL2KW 紧凑型 2kW 高压电源

斯派曼SL2KW 系列高压电源是在最小的空间里,设计出完全符合性能标准的产品。其电路包括一个配有专有控制的谐振高频逆变器,可以无故障运行在极端瞬变过程和电弧环境,工作效率超过85%。产品功能齐全,输出范围宽,配有多种选项。

典型应用:

  • 半导体制造
  • 静电
  • 电子束系统
  • 电容充电
  • CPT/CRT 测试
  • 高压绝缘试验测试
  • 一般实验室
  • CW 激光

CE Marking

规格

(Ref. 128071-001 REV. J)

Status Indicators:

Voltage and Current Control Mode, Interlock Open and Closed, High Voltage Inhibit, Overcurrent and Overvoltage, Arc, Regulation Error, Overtemperature.

Input:

Standard: 208Vac ±10%, 50/60Hz., three phase 
Optional: 220Vac ±10%, 50/60Hz., single phase

Output:

Models available from 0.5kV to 50kV. Each model is available in positive, negative or reversible polarity output.

Front Panel Controls:

Voltage and current are continuously adjustable by ten­turn potentiometers with lockable counting dials, ON/OFF circuit breaker/lamp, high voltage ON switch/indicator and high voltage OFF switch/indicator.

Voltage Regulation:

Load: 0.005% of maximum voltage +500mV for full load change. Line: ±0.005% of full voltage +500mV over specified input range

Current Regulation:

Load: 0.01% of maximum current ±100µA 
for full voltage change.

Line: ±0.005% of maximum current for a ±10% 
input line change.

Ripple:

0.1% p­p +1Vrms, three phase line input 
0.3% p­p +1Vrms, single phase line input

Temperature Coefficient:

100ppm/°C voltage or current regulated. Higher 
stability is available on special order.

Environmental:

Temperature Range: 

Operating: 0°C to 50°C. 
Storage: ­40°C to 85°C.

Humidity:

10 to 90% relative humidity, non­condensing

Stability:

100ppm/hour after 1/2 hour warm­up for 
both voltage and current regulation.

Metering:

Digital voltage and current meters, 31/2 
digit ±1 least significant digit.

Interface Connector:

25 pin male D connector

Output Cable:

10’ (3.3m) of shielded high voltage 
cable removable at the rear panel.

AC Line Input Cable:

A 6 foot (1.83m) cable is permanently attached to the unit. Single phase units use 3 conductor 12AWG cable, three phase units use 4 conductor 16AWG cable.

Dimensions:

31/2”H(2U) x 19”W x 19”D 

(8.9cm x 48.3cm x 48.3cm).

Weight:

17 to 26lbs (7.7 to 11.8kg) depending on model.

Regulatory Approvals:

Compliant to 2004/108/EC, the EMC Directive 
and 2006/95/EC, the Low Voltage Directive.

SL2KWSELECTIONTABLE

Maximum Rating Model Number
kV mA  
0.5 4000 SL0.5PN2000
1 2000 SL1PN2000
2 1000 SL2PN2000
3 666 SL3PN2000
6 333 SL6PN2000
8 250 SL8PN2000
10 200 SL10*2000
15 133 SL15*2000
20 100 SL20*2000
30 66.6 SL30*2000
40 50 SL40*2000
50 40 SL50*2000

*Specify “P” for positive polarity or “N” for negative polarity or“PN” for reversible polarity  

SL2KW25PINDCONNECTOR

TB1 Signal Signal Parameters
1 PowerSupply Common Signal Ground
2 External Inhibit Ground=Inhibit, Open=HV On
3 External Interlock +15V at Open, <15mA at Closed
4 External Interlock Return Return for Interlock
5 Current Monitor 0 to 10V=0 to 100% Rated Output
6 kV Test Point 0 to 10V=0 to 100% Rated Output
7 +10Vdc Reference +10Vdc, 1mA Max
8 Remote Current Program In 0 to 10V=0 to 100% Rated Output
9 Local Current Program Out Front Panel Program Voltage
10 Remote Voltage Program In 0 to 10V=0 to 100% Rated Output
11 Local Voltage Program Out Front Panel Program Voltage
12 EFR Common External Fault Relay
30V @ 2A Maximum
13 EFR-NC/EFR-NO
14 Local HV Off Out +15V at Open, <25mA at Closed
15 HV Off Connect to HV OFF for FP Operation
15 HV Off
16 Remote HV On +15V, 10mA Max=HV Off
17 Remote HV Off Indicator 0=HV On, +15V, 10mA Max=HV Off
18 Remote HV On Indicator 0=HV Off, +15V, 10mA Max=HV On
19 Remote Voltage Mode Open Collector 35V Max, 10mA Max,
On=Active
20 Remote Current Mode
21 Remote Power Mode
22 Remote PS Fault 0=Fault, +15V, 0.1mA Max=No Fault
23 +15V Output +15V, 100mA Max
24 Power Supply Common Signal Ground
25 Shield Return Chassis Ground
How to Order:

Sample model number: SL20PN2000/NSS/DPM4
SL2KW Series unit, 20kV maximum output voltage,
reversible polarity output, 2000 watts, no slow start,
4.5 digit panel meters

There may be some restrictions on multiple option combinations. Please contact our Sales department for more details.

表和图

DIMENSIONS: in.[mm]

FRONT VIEW

SL2KW 紧凑型 2kW 高压电源 (Image 1)

TOP VIEW

SL2KW 紧凑型 2kW 高压电源 (Image 2)

BACK VIEW

SL2KW 紧凑型 2kW 高压电源 (Image 3)

CE Marking

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.