SL150kV

  • 电缆连接的150kV、1200W 电源
  • 仅需要8.75˝ (5U) 面板高度
  • 丰富的模拟接口
  • 电弧灭弧/电弧计数/电弧跳闸
  • 综合的数字故障诊断

1200W 高压电源

斯派曼SL150kV 机架式高压电源是专为需要150kV、1200W,紧凑型电缆连接的标准尺寸的科学和工业的OEM应用而设计。型号有正极性、负极性或可逆极性可选。SL150kV 是全系有电弧和短路保护。提供卓越的调节规格和杰出的稳定性能。真空封装的高压输出部分消除了由于环境因素而导致的问题,确保可靠的无电晕操作。

典型应用:

  • 静电
  • 高压绝缘试验测试
  • 半导体加工
  • 电容充电

CE Marking

规格

(Ref. 128062-001 REV. H)

Front Panel Controls:

Front Panel Controls Power ON/OFF switch, HV ON
Switch, HV OFF Switch with preset feature, 3.5 digit
backlight digital meters for display of output voltage
and output current,10 turn locking potentiometers with
counting dials for adjustment of both output voltage
and output current.

Front Panel Indicators:

HV ON                          High Voltage Inhibit
HV OFF                        Over Current
Voltage Control Mode     Over Voltage
Current Control Mode      Arc
Interlock Open               Regulation Error
Interlock Closed             Overtemperature

Input:

220Vac ±10%, 50/60 Hertz

Output Voltage:

0 to 150kV

Output Polarity:

Positive, negative or reversible specify at time of order

Output Current:

8mA

Output Power:

1200W

Voltage Regulation:

Load: 0.01% of rated voltage for a full load change

Line: ±0.01% of rated current over specified input voltage range

Current Regulation:

Load: 0.01% of rated current ±100μA for full voltage change.

Line: ±0.01% of rated current over specified input voltage range

Ripple:

0.1% peak to peak of maximum output

Temperature Coefficient:

100ppm/°C.

Stability:

100ppm/hr after a 2 hour warm up, for both voltage and current regulation

Operating Temperature:

0 to 40°C operating

Storage Temperature:

-40 to +85°C storage

Humidity:

20% to 85%, non-condensing

Input Line Connector:

3 conductor 12 AWG 6 ft (1.83m) cable, permanently attached

Output Connector:

A detachable 10 ft (3.05m) shielded HV cable is provided

Cooling:

Forced Air

Dimensions:

8.75”H x 19”W x 22”D rack mount. (22.23cm x 48.26cm x 55.88cm)

Weight:

89 pounds (40.4kg)

Regulatory Approvals:

Compliant to 2014/30/EU, the EMC Directive and 2014/35/EU, the Low Voltage Directive.

Options:

200 - 200Vac Input Voltage
AOL - Adjustable Overload Trip
APT - Adjustable Power Trip
AT - Arc Trip
BFP - Blank Front Panel
CPC - Constant Power Control
DPM4 - 4.5 Digit Panel Meters
EFR - External Fault Relay
LL(X) - Non-Standard HV Cable Length (10 standard)
NAD - No Arc Detect
NSS - No Slow Start
RFR - Remote Fault Reset
SS(X) - Non-Standard Slow Start (6 seconds standard)

SL150 ANALOG INTERFACE—JB4 25 PIN MALE D CONNECTOR

Pin Signal Parameters
1 Power Supply Common Signal Ground
2 External Inhibit Ground = Inhibit, Open = HV ON
3 External Interlock +15Vdc @ open, ≤ 5mA @ closed
4 External Interlock Return Connect to pin 3 to enable supply
5 Current Monitor 0 to 10Vdc = 0 to 100% rated voltage, Zout =10kΩ
6 Voltage Monitor 0 to 10Vdc = 0 to 100% rated voltage, Zout =10kΩ
7 +10Vdc Reference +10Vdc @ 1mA, maximum
8 Remote Current Program Input 0 to 10Vdc = 0 to 100% rated voltage, Zout =10kΩ
9 Local Current Program Output Multi-turn front panel pot for local control capability
10 Remote Voltage Program Input 0 to 10Vdc = 0 to 100% rated voltage, Zout =10kΩ
11 Local Voltage Program Output Multi-turn front panel pot for local control capability
12 EFR (Common) External Fault Relay (Optional)
13 EFR (Normally Open) External Fault Relay (Optional)
14 Local HV OFF OUT +15Vdc @ open, <25mA @ closed, connect to
HV OFF for front panel operation
15 HV OFF Connect to HV OFF OUT for front panel operation
16 Remote HV ON +15Vdc @ 10mA maximum = HV OFF
17 Remote HV OFF Indicator 0 = HV ON, +15Vdc @ 10mA maximum = HV O
18 Remote HV ON Indicator 0 = HV OFF, +15Vdc @ 10mA maximum = HV ON
19 Remote Voltage Mode Open collector 50Vdc @ 10mA maximum, ON = Active
20 Remote Current Mode Open collector 50Vdc @ 10mA maximum, ON = Active
21 Remote Power Mode Open collector 50Vdc @ 10mA maximum, ON = Active
22 Power Supply Fault Open collector, 50Vdc @ 10mA maximum
23 +15Vdc Output +15Vdc @ 100mA, maximum
24 Power Supply Ground Signal Ground
25 Shield Return Chassis Ground

Specify “P” for positive polarity or “N” for negative polarity, and PN = reversible as illustrated below.

Sample Model Number: SL150P1200/BFP/LL(20)

Where SL = power supply series, 150 = maximum output voltage in kV,
P = positive output polarity, 1200 = maximum output power (watts), BFP = Blank
Front Panel, LL(20) = 20 foot HV cable.

表和图

DIMENSIONS: in.[mm]

FRONT VIEW

SL150kV 1200W 高压电源 (Image 2)

TOP VIEW

SL150kV 1200W 高压电源 (Image 3)

BACK VIEW

SL150kV 1200W 高压电源 (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.