PCM 系列

  • 输出电压从1kV 至70kV
  • 电弧和短路保护
  • 存储能量低
  • 输出电流和电压测试点
  • 启用/禁用输出控制
  • 安全互锁电路
  • 提供OEM 定制

120W 高压电源

斯派曼PCM 系列是交流输入,120W 高压电源模块。其特点:前端功率因数校正,提供0.99 功率因数以及通用的输入电压(85Vac 至265Vac) 能力。固定极性的模块(在订购时指定正极性或负极性) 特点:自动切换电压和电流调节,使其适合敏感负载应用。PCM 系列连同电弧和短路保护的强健设计,允许在极其苛刻的环境下工作。

典型应用:

  • 静电纺丝
  • 高压绝缘试验测试
  • 探测器阵列
  • 电泳
  • 电缆测试

CE RU Marking

规格

(Ref. 128006-001 REV. M)

Input:

85-265Vac, 47-63Hz, power factor corrected.

UL® rated for 85-250Vac input for 1kV to 5kV models.

Power Factor (Typical):

FL: 0.99

NL: 0.98

Efficiency:

80 to 85%, typical

Output:

11 models from 1kV to 70kV. Positive or negative polarity outputs, specify at time of order.

Voltage Regulation:

Load: 0.01% of output voltage, no load to full load.

Line: ±0.01% for ±10% change in input voltage.

Current Regulation:

Load: 0.01% of output current from 0 to rated voltage. Line: 0.01% of rated current over specified input range.

Ripple:

0.1% p-p of maximum output voltage.

Voltage Stability:

0.02% per 8 hours.

Temperature Coefficient:

100ppm per °C, voltage or current regulated.

Environmental:

Operational: 0 to 40°C

Storage: -40°C to +85°C

Humidity: 0 to 90%, non-condensing 

Dimensions:

1kV to 50kV: 3.65”H x 5”W x 9”D (9.27cm x 12.7cm x 22.9cm). 

60, 70kV: 3.65”H x 5”W x 11”D (9.27cm x 12.7cm x 27.9cm).

Weight:

7 pounds (3.18kg)

AC Input Connectors:

IEC320 with mating cable.

Interface Connector:

15 pin D connector.

HV Output Cable:

Spellman Delrin type connector with 36” (91.4cm) shielded cable.

Front Panel Ground Connection:

Threaded 8-32 ground stud

Regulatory Approvals:

Compliant to 2014/30/EU, the EMC Directive and 2014/35/EU, the Low Voltage Directive.

PCM SELECTION TABLE

Maximum Rating Model Number  
kV mA  
1 120 PCM 1*120
3 40 PCM 3*120
5 24 PCM 5*120
10 12 PCM 10*120
15 8 PCM 15*120
20 6 PCM 20*120
30 4 PCM 30*120
40 3 PCM 40*120
50 2.4 PCM 50*120
60 2.0 PCM 60*120
70 1.7 PCM 70*120

 *Specify “P” for positive polarity or “N” for negative polarity.

PCM D CONNECTOR 15 PIN

Pin Signal Parameters
1 Remote mA Program 0 to 10Vdc = 0 to 100% of rated output
2 Remote kV Program 0 to 10Vdc = 0 to 100% of rated output
3 High Voltage Enable/Inhibit Open = HV Inhibit, Ground = HV ON
4 mA Monitor 0 to 10Vdc = 0 to 100% of rated output
5 Interlock Return Connect to pin 6 to close interlock circuit
6 Interlock Out Connect to pin 5 to close interlock circuit
7 kV Monitor 0 to 10Vdc = 0 to 100% of rated output
8 Local kV Program Multi-turn front panel pot (screwdriver)
9 Power Supply Fault 0Vdc = No Fault, +15Vdc @ 1mA = Fault
10 +10Vdc Reference +10Vdc @ 1mA maximum
11 Signal Ground Signal Ground
12 Spare No Connection
13 Spare No Connection
14 Spare No Connection
15 Local mA Program Multi-turn front panel pot (screwdriver)

表和图

DIMENSIONS: in.[mm]

SIDE VIEW

PCM 系列 120W 高压电源 (Image 2)

BACK VIEW

PCM 系列 120W 高压电源 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.