MX8Plus

  • ±8kV,25mS 极性反转速度。
  • 精确的模拟电压和电流控制
  • 精确的模拟电压和电流监测
  • 高稳定性
  • 低纹波和低噪声
  • 高压禁用控制
  • 符合RoHS

高性能高压电源

斯派曼通过RoHS 认证的MX8 Plus 是一款快速可逆精密调节高性能的电源。能够在25ms内,以"热切换" 方式逆转极性。

MX8 Plus 低纹波规格是拓扑技术的特点,使其成为质谱分析的理想之选;特别是安全检测系统、倍增器电极、样品离子化、毛细管电泳和静电印刷应用。MX8 专为EI 和APCI 应用而设计。

MX8 Plus 可以根据OEM 的需求定制,例如提高纹波性能、不同的电压或电流能力。

典型应用:

  • 质谱分析
  • 毛细管电泳
  • 静电印刷

 RoHs Compliant logo

规格

(Ref. 128067-001 REV. E)

Input Voltage:

+24Vdc, ±10%

Input Current:

<0.5A nominal continuous

<1.2A peak during reversing 

Output Voltage:

0V to ±8kV (see note 1)

Output Current:

100µA

Output Polarity:

Bipolar

Voltage Regulation:

Line: <±0.1%% for ±10% input voltage change

Load: <0.1% for 0 to full load 

Current Regulation:

Line: ±0.1% for +1V input voltage change for any load condition

Load: ±0.1% for full load to short circuit

Ripple:

<0.1% p-p @ 100μA 

Temperature Coefficient:

≤ 100ppm per degree C

Environmental:

Temperature Range:

Operating: 5°C to 45°C

Storage: -35°C to 85°C

Humidity:

10% to 85%, non-condensing

Stability:

0.05% per hour after 1 hour warm up

Polarity Reversal Time:

<25ms from command to 90% into 100pF load capacitance(see note 2) 

Protection:

Arc and short circuit protected

Output Voltage Limit:

Output voltage must not exceed ±8kV ±250V under any input or output conditions

Dimensions:

1.48. H X 3.23. W X 9.45. D (37.6mm X 82mm X 240mm)

Weight:

Approximately 3.3 pounds (1.5kg)

Input Connector:

14 way Molex housing p/n 39-01-2140 or similar with female terminals. Cable length 508mm

Output Connector:

Alden F303D24

Regulatory Approvals:

Compliant to 2004/108/EC, the EMC Directive and 2006/95/EC, the Low Voltage Directive. Compliant to 2002/95/EC, RoHS. RoHS compliant.

 

Note 1: Linearity not guaranteed below 200V. Maximum offset ±20V when programmed to zero or disabled using remote enable.

Note 2: Unit incorporates circuitry to minimize the effects of low programmed current on reversing time. Polarity reversal time applies when current is programmed to 3µA or above.

MX8 PLUS14 PIN SOCKET

Pin Signal
1 +24Vdc Input
2 Chassis and 24Vdc Ground
3 Enable/Inhibit Input
4 8kV Voltage Monitor output
5 Voltage Control Input
6 Current Monitor Output
7 Current Control Input
8 Polarity Control Input
9 Analog Ground
10 Current/Voltage Control Indicator
11 N/C
12 N/C
13 N/C
14 N/C
How to Order:
Standard: PART NO.:MXP8PN24

表和图

DIMENSIONS: in.[mm]

SIDE VIEW

MX8Plus 高性能高压电源 (Image 2)

TOP VIEW

MX8Plus 高性能高压电源 (Image 3)

FRONT VIEW

MX8Plus 高性能高压电源 (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.