MX10

  • 通过逻辑信号热切换极性可逆
  • 精密调节,低纹波。
  • 极性逆转在250mS 之内(选项来提高至100mS)
  • 电压和电流监测输出
  • 远程高压禁用
  • 高压输出飞线电缆
  • 电压和电流控制选项

高性能高压电源

斯派曼MX10 是一款精密调节的高性能直流-直流转换器,特色:有“热切换” 极性逆变能力。MX10 的低纹波规格使其成为质谱分析应用的理想选择;特别是安全检测系统、倍增器电极、样品离子化、毛细管电泳和静电印刷应用。

MX10 的额定电压为10kV,额定电流为100uA。封装在一个屏蔽的金属外壳里。此电源通过一个逻辑信号输入来控制输出极性逆变。具有高压禁用功能,还提供电压和电流监测。MX10 容易定制,可以提供电流控制、改进纹波性能和更高的电压和电流能力,以满足OEM 需求。

典型应用:

  • 质谱分析
  • 毛细管电泳
  • 静电印刷

CE Marking

规格

(Ref. 128028-001 REV. H)

Input Voltage:

+24Vdc, ±1 volt

Input Current:

<400mA continuous

<1.2A during reversing 

Output Voltage:

±200Vdc to ±10kV

Output Current:

0 to 100uA max.

Polarity:

Remotely reversible via logic signal, 250mS to settle to ±2%, 1 Hz maximum switch rate

Voltage Regulation:

Load: 0.1% of maximum output voltage for a no load to full load change

Line: 0.1% of maximum output voltage for a 1 volt input line change

Current Regulation: (VCC Option)

Load: 0.1% of maximum rated current for a 0 to 100% voltage change

Line: 0.1% of maximum rated current for a 1 volt input line change

Voltage/Current Programming:

0 to 10 volt corresponds to 0 to 100% of rated output voltage

Voltage/Current Monitor:

0 to 10 volt corresponds to 0 to 100% of rated output voltage

Programming and Monitor Accuracy:

±2%

Ripple:

≤0.005% Volts p-p 

Stability:

0.1% per hour after 1 hour warmup

Temperature Coefficient:

≤100ppm per degree C

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90%, non-condensing.

Cooling:

Convection cooled

Dimensions:

1.63. H X 6.61. W X 4.53. D (41.5mm X 168mm X 115mm)

Weight:

Approximately 3 pounds (1.4kg)

Interface/Power Connector:

9 pin male D connector

HV Output Connector:

39.4. (1m) Flying Lead of URM76 LSF cable

Regulatory Approvals:

Compliant to 2004/108/EC, The EMC Directive and 2006/95/EC, The Low Voltage Directive.

Pin Signal Signal Parameters
1 Voltage Monitor 0-10V=0-100% of Rated Output
2 External Inhibit Input Open or >10V = “OFF”; <4V = “ON”
3 Current Programming Input 0-10Vdc = 0-100% of Rated Output (on VCC option)
4 Signal Ground Signal Ground
5 Current Monitor 0-10Vdc = 0-100% of Rated Output
6 Polarity Control Input Open or >10V = “NEGATIVE”; <4V = “POSITIVE”
7 Voltage Programming Input 0-10Vdc = 0-100% of Rated Output
8 +24V Input +24V Input
9 Power Ground Power Ground
How to Order:
Standard: PART NO.:MX10PN24
VCC Option: PART NO.:MX10PN24/VCC

表和图

DIMENSIONS: in.[mm]

SIDE VIEW

MX10 高性能高压电源 (Image 3)

TOP VIEW

MX10 高性能高压电源 (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.