CZE2000

  • 静电纺丝理想之选
  • 0-30kV 远程编程
  • 0-300μA 远程编程
  • 在无负载的情况下,根据指令在 1 秒内极性可逆。
  • 低储存能量,电流限制输出
  • 价格划算的模块化设计

自动逆变高压电源

斯派曼CZE2000 模块化的高压电源是OEM 应用的理想之选。专门设计用于需要热切换可逆输出电压的应用。电源的输出极性,通过在接口连接器上提供极性控制信号能快速并安全地反转。

输出电压和电流是完全可调的,通过接地参考远程编程信号如:0 至10Vdc 对应0 至100% 额定输出电压和电流。

远程监测功能是通过电压和电流测试点提供,如:0 至10Vdc 对应0 至100% 额定电压和电流。此外远程极性和模式指示器提供一个全面的电源概览操作。

卓越的负载和输入调节规格与出色的稳定性和低纹波保证了一个稳定的高压输出,实现了一致的工艺效果。

典型应用:

  • 静电纺丝
  • 质谱分析
  • 毛细管电泳
  • 静电研究

CE RU Marking

规格

(Ref. 128076-001 REV. F)

Input Voltage:

24Vdc, ±10%

Input Current:

Less than 1 amp

Efficiency:

75% typical

Output Voltage:

See selection table

Output Current:

See selection table

Polarity:

Auto reversible via command

Power:

10 watts, maximum

Line Regulation:

0.01% for a 10% input voltage change

Load Regulation:

0.01% for a full load change

Ripple:

0.1% Vp-p

Stability:

0.02% per 8 hours (after 1/2 hr warmup)

NL Time Constant:

100ms

Stored Energy:

0.2 Joules at 30kV

Temperature Coefficient:

100ppm/°C

Operating Temperature:

0°C to 40°C

Storage Temperature:

-40°C to 85°C

Humidity:

10% to 85% RH, non condensing

Cooling:

Convection cooled

Dimensions:

3.5”H x 5”W x 10”D (8.9cm x 12.7cm x 25.4cm).

Weight:

6.2lbs. (2.8kg)

Interface Connector:

25 pin male D connector

HV Output Connector:

Detachable 36. (0.91m) cable provided

Regulatory Approvals:

Compliant to 2004/108/EC, The EMC Directive and 2006/95/EC, The Low Voltage Directive, UL/CUL recognized file E148969

CZE2000 SELECTION TABLE

Maximum Rating Model Number
kV mA  
5 2.0 CZE 5PN10
10 1.0 CZE 10PN10
15 0.67 CZE 15PN10
20 0.50 CZE 20PN10
30 0.30 CZE 30PN10

CZE2000 25 PIN MALE D CONNECTOR

Pin Signal Parameters
1 +24Vdc Return Power Return
2 +24Vdc Return Power Return
3 +24Vdc Return Power Return
4 HV Enable/Inhibit Open or <1Vdc = HV OFF, >3.4Vdc
(up to 15Vdc) = HV ON1
5 Voltage Test Point 0 to 10Vdc = 0 to 100% rated output, Zout =10kΩ, 1%
6 Current Test Point 0 to 10Vdc = 0 to 100% rated output, Zout =10kΩ, 1%
7 Chassis Ground Ground
8 Remote Voltage Control 0 to 10Vdc = 0 to 100% Rated Output, Zin =10MΩ
9 Remote Current Control 0 to 10Vdc = 0 to 100% Rated Output, Zin =10MΩ
10 +10Vdc Reference Output +10Vdc, 4mA maximum
11 Signal Return Signal Return
12 Polarity Control Open or >3.4Vdc (up to 15Vdc) = Positive Polarity. Grounded or <1Vdc = Negative Polarity
13 Positive Polarity Indicator +24Vdc sourced through a 100Ω series limiting resistor. +24Vdc = active signal
14 +24Vdc Input Power Input
15 +24Vdc Input Power Input
16 Chassis Ground Ground
17 Negative Polarity Indicator +24Vdc sourced through a 100Ω series limiting resistor. +24Vdc = active signal
18 I Mode Indicator Open collector pulled up internally to +15Vdc through 2.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
19 V Mode Indicator Open collector pulled up internally to +15Vdc through 2.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
20 Return Current Test Point 0 to 10Vdc = 0 to 100% rated output current, as measured returned from load. Zout =10kΩ, 1%
21 Load Return High Voltage Return Point. Required for GFI circuit functionality
22 Ground Fault Indicator Open collector pulled up internally to +15Vdc through 4.7kΩ resistor with a 470Ω limiting resistor in series. Transistor OFF = signal active
23 Spare No Connection
24 Spare No Connection
25 Spare No Connection

表和图

DIMENSIONS: in.[mm]

FRONT VIEW

CZE2000 自动逆变高压电源 (Image 1)

TOP VIEW

CZE2000 自动逆变高压电源 (Image 2)

BOTTOM VIEW

CZE2000 自动逆变高压电源 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.