CCM1KW

  • 紧凑的轻量级封装
  • 因子校正输入
  • 成本模块化 OEM 平台
  • 谐振软开关逆变器拓扑
  • UL/CUL 认证;RoHS 合规

*注意:所有规格如有变更,恕不另行通知。有关最新修订,请参阅本数据表的英文 PDF 版本

两年延保,RoHS 合规标识 UL 标识

1kW 电容充电模块

斯派曼CCM1KW 电容充电模块设计提供每秒1000 焦耳,输出电压高达4000V。交流输入功率因数校正,小的封装尺寸和全面的模拟接口,使得CCM1KW 能更简单地集成到您的系统中。可选正极性或负极性,CCM1KW 有电弧、开路和短路电路保护。Units can be operated in parallel for applications requiring higher power (see manual for details).

典型应用:

  • 用于固化和消毒的紫外线源
  • 工业和医疗激光应用

规格

(Ref. 128103-001 REV. H)

Input Voltage:

90-264 Vac, 47-63 Hertz, power factor corrected input =0.98

Input Current:

14 Amps worst case, 1000 Joules per second

7 Amps worst case, 500 Joules per second

Efficiency:

>85%

Output Power:

1000 Joules per second, 500 Joules per second

Output Voltage:

0-1kV, 0-2kV and 0-4kV version available

Output Polarity:

Positive or negative, specify at time of order

Stored Energy:

Less than 0.2 Joules

Pulse to Pulse Repeatability:

±0.2% up to 1kHz

Temperature Coefficient:

≤ 100ppm per degree C

Fault Diagnostic System:

Over Temperature and Over Voltage Over Voltage Fault is latched requiring AC power recycle to clear. Over Temperature Fault is latched but can be cleared via inhibit/fault reset line.

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90% RH, non-condensing

Cooling:

Forced air

Input Line Connector:

2 position Phoenix MSTB connector, straight and right angle mating connector provided

HV Output Connector:

Standard: Kings/Winchester Electronics SHV 1707-1

Optional: Amphenol MHV UG-931/U

Interface-A Connector:

15 pin D, female

Interface-B Connector:

4 pin male Molex 705530038

Ground Stud:

10-32, nut supplied

Dimensions:

3. H X 6. W X 9. D (76.2mm x 152.4mm x 228.6mm)

Mounting:

M4 screw. Max. depth is 0.188. (4.78mm)

Weight:

6.9lb. (3.13kgs)

Regulatory Approvals:

Compliant to 60601-1-1. Compliant to 60601-1-2. UL/CUL recognized file E242584. RoHS compliant.

AC INPUT–2 POSITION TERMINAL BLOCK

Pin Signal Signal Parameters
1 AC Input High/Phase 1 Line Hot/Phase 1
2 AC Input Low/Phase 2 Line Neutral/Phase 2

ANALOG INTERFACE A— 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Inhibit/Fault Reset Ground = HV Enable, Open/+15Vdc = HV Inhibit
2 N/C N/C
3 OverTemp Fault No OT Fault = +15Vdc @ 3mA, OT Fault = Ground
4 Signal Ground Signal Ground (optional)*
5 Voltage Program 0 to 10Vdc = 0 to 100% rated output voltage
6 Overvoltage Status No OVP = +15Vdc @ 3mA, OVP Fault = Ground
7 Peak Hold Monitor Peak output voltage displayed, 0 to 10Vdc = 0 to 100% rated output voltage with a 5 second time constant
8 Voltage Monitor 0 to 10Vdc = 0 to 100% rated output voltage, ±1%
9 +15Vdc +15Vdc @ 150mA, maximum**
10 N/C N/C
11 +15Vdc +15Vdc @ 150mA, maximum (optional)**
12 Signal Ground Signal Ground (optional)*
13 End of Charge Charging = +15Vdc @ 1.5mA, End of Charge = Ground
14 Signal Ground Signal Ground
15 Signal Ground Signal Ground

Note: Output status signals are NMOS transistor controlled, 100mA maximum sink current. Actual signals are 5kΩpull ups to the internal +15Vdc logic source.

*Optional interface signals can be provided to be compatable with other pre-existing legacy interfaces. On standard units these signals are N/C.

**+15Vdc ±10% is provided on the standard unit. Optional +12Vdc ±5%/100mA, maximum can be provided.

INTERFACE B–4 PIN MALE D HEADER

Pin Signal Signal Parameters
1 Inhibit/Fault Reset Ground = HV Enable, Open/+15Vdc = HV Inhibit
2 Signal Ground Signal Ground
3 Voltage Program 0 to 10Vdc = 0 to 100% rated output voltage
4 +15Vdc +15Vdc @ 150mA, maximum (optional)*

CCM1KW SELECTION TABLE kV JOULES/SECOND

Model
kV Joules/Second  
1 500 CCM1*500
2 500 CCM2*500
4 500 CCM4*500
1 1000 CCM1*1000
2 1000 CCM2*1000
4 1000 CCM4*1000

*Specify P for positive or N for negative 500 J/s units have a single internal fan, 1000 J/s units have both an internal and external fan.

 

CCM1KW Capacitor Charging Module (Image 2)

Straight and right angle AC input mating connectors are provided

表和图

500 Joules per second

(unit with internal fan)

DIMENSIONS: in.[mm]

REAR VIEW

CCM1KW 1kW 电容充电模块 (Image 4)

FRONT VIEW

CCM1KW 1kW 电容充电模块 (Image 8) 

BOTTOM VIEW

CCM1KW 1kW 电容充电模块 (Image 9)

1000 Joules per second

(unit with internal and external fan)

DIMENSIONS: in.[mm]

REAR VIEW

CCM1KW 1kW 电容充电模块 (Image 4)

FRONT VIEW

CCM1KW 1kW 电容充电模块 (Image 3)

BOTTOM VIEW

CCM1KW 1kW 电容充电模块 (Image 5)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.