CCM

  • 紧凑、轻量封装
  • 输入功率因数校正
  • 低成本模块,OEM 平台。
  • 坚固的IGBT 逆变器设计
  • 提供辅助+24Vdc @ 2.2A 输出
2 Year Extended Warranty

4kW 电容充电模块

斯派曼CCM 电容充电模块设计提供每秒3100 焦耳,输出电压高达4000V。功率密度为每立方英寸6.6W,与其他市场上可买到的电源相比,CCM 封装在同样的体积超过30% 功率。交流输入功率因数校正,小的封装尺寸和全面的模拟接口,使得CCM 能更简单地集成到您的系统中。可选正极性或负极性,CCM 有电弧、开路和短路电路保护。

典型应用:

  • 用于固化和消毒的紫外线源
  • 工业和医疗激光应用
  • 电感耦合等离子体质谱应用

CE Marking

规格

(Ref. 128054-001 REV. K)

Input Voltage:

180-264 Vac, 47-63 Hertz, power factor corrected input =0.98, fused via externally accessible fuses

Efficiency:

>85%

Output Power:

3100 Joules per second, average

Output Voltage:

4000 Volts, maximum

Output Polarity:

Positive or negative, specify at time of order

Pulse to Pulse Repeatability:

±0.6% up to 120 Hertz

Temperature Coefficient:

≤ 100ppm per degree C

Fault Diagnostic System:

Over Temperature, Over Voltage and Open Load sensing

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity:

10% to 90% RH, non-condensing

Cooling:

Forced air

Ground Stud:

M6 X10mm, M6 nut supplied

Input Line Connector:

2 position Phoenix HDFK4 connector

HV Output Connector:

Kings KV-79-15, Bulkhead mounted

+24Vdc Output Connector:

AMP #1-350942-0

Dimensions:

5.81. H X 5.8. W X 14. D (148mm x 147mm x 356mm)

Weight:

14.5lb. (6.6kgs)

Regulatory Approvals:

UL Safety Test Standards:

ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10)

CAN/CSA-C22.2 No. 60601-1 (2008)

EMC Test Standard:

IEC 60601-1-2

AUXILIARY +24VDC CONNECTOR J2 POSITION AMP CONNECTOR

Pin Signal Signal Parameters
1 +24Vdc +24Vdc @ 2.2 amps
2 Ground Ground

CCM ANALOG INTERFACE— J1 15 PIN FEMALE D CONNECTOR

Pin Signal Signal Parameters
1 Inhibit Ground = HV ON, High = HV OFF
2 Temperature Fault Ground = No Fault, +15Vdc = Fault
+15Vdc through 6.8kΩ
3 General Fault Ground = No Fault, +15Vdc = Fault
+15Vdc through 6.8kΩ
4 HV ON Indicator Ground = HV ON, +15Vdc = HV OFF
+15Vdc through 6.8kΩ
5 Voltage Program 0 to 10Vdc = 0 to 100% Rated Output
6 Open Circuit Detector Ground = Open Circuit, +15Vdc = OK
+15Vdc through 6.8kΩ
7 Peak Voltage Monitor 0 to 10Vdc = 0 to 100% Rated Output
held for 10 seconds at peak level
8 Voltage Monitor 0 to 10Vdc = 0 to 100% Rated Output,
Instantaneous output
9 +15Vdc Output +15Vdc @ 150ma output, maximum
10 n/c n/c
11 +15Vdc Output +15Vdc @ 150ma output, maximum
12 +15Vdc Output +15Vdc @ 150ma output, maximum
13 End of charge Indicator Ground = End of Charge, High Impedance = Charging
14 Ground Ground
15 Ground Ground

表和图

DIMENSIONS: in.[mm]

FRONT VIEW

CCM 4kW 电容充电模块 (Image 1)

TOP VIEW

CCM 4kW 电容充电模块 (Image 2)

BACK VIEW

CCM 4kW 电容充电模块 (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.