MX8Plus

  • 25ms以内の±8kV極性反転
  • 精密アナログ電圧/ 電流コントロール
  • 精密アナログ電圧/ 電流モニタ
  • 高安定度
  • 低リップル/ 低ノイズ
  • 高電圧インヒビット制御
  • RoHS対応

高性能高圧電源

MX8 Plusは動作中の高速極性反転(25ms以内)が可能な高 性能・RoHS対応電源です。

また低リップル仕様のため、質量分析アプリケーション、特に、 セキュリティ探知装置、ダイノード、サンプルのイオン化、また キャピラリ電気泳動および静電印刷アプリケーションに最適 す。

MX8 Plusは、特にEIおよびAPCI向けに設計されています。 OEMによるリップル・出力電圧等の仕様変更(御要求)について は別途ご相談下さい。

用途

  • 質量分析
  • キャピラリ電気泳動
  • 静電印刷

 RoHs Compliant logo

Specifications

(Ref. 128067-001 REV. E)

Input Voltage:

+24Vdc, ±10%

Input Current:

<0.5A nominal continuous

<1.2A peak during reversing 

Output Voltage:

0V to ±8kV (see note 1)

Output Current:

100µA

Output Polarity:

Bipolar

Voltage Regulation:

Line: <±0.1%% for ±10% input voltage change

Load: <0.1% for 0 to full load 

Current Regulation:

Line: ±0.1% for +1V input voltage change for any load condition

Load: ±0.1% for full load to short circuit

Ripple:

<0.1% p-p @ 100μA 

Temperature Coefficient:

≤ 100ppm per degree C

Environmental:

Temperature Range:

Operating: 5°C to 45°C

Storage: -35°C to 85°C

Humidity:

10% to 85%, non-condensing

Stability:

0.05% per hour after 1 hour warm up

Polarity Reversal Time:

<25ms from command to 90% into 100pF load capacitance(see note 2) 

Protection:

Arc and short circuit protected

Output Voltage Limit:

Output voltage must not exceed ±8kV ±250V under any input or output conditions

Dimensions:

1.48. H X 3.23. W X 9.45. D (37.6mm X 82mm X 240mm)

Weight:

Approximately 3.3 pounds (1.5kg)

Input Connector:

14 way Molex housing p/n 39-01-2140 or similar with female terminals. Cable length 508mm

Output Connector:

Alden F303D24

Regulatory Approvals:

Compliant to 2004/108/EC, the EMC Directive and 2006/95/EC, the Low Voltage Directive. Compliant to 2002/95/EC, RoHS. RoHS compliant.

 

Note 1: Linearity not guaranteed below 200V. Maximum offset ±20V when programmed to zero or disabled using remote enable.

Note 2: Unit incorporates circuitry to minimize the effects of low programmed current on reversing time. Polarity reversal time applies when current is programmed to 3µA or above.

MX8 PLUS14 PIN SOCKET

Pin Signal
1 +24Vdc Input
2 Chassis and 24Vdc Ground
3 Enable/Inhibit Input
4 8kV Voltage Monitor output
5 Voltage Control Input
6 Current Monitor Output
7 Current Control Input
8 Polarity Control Input
9 Analog Ground
10 Current/Voltage Control Indicator
11 N/C
12 N/C
13 N/C
14 N/C
How to Order:
Standard: PART NO.:MXP8PN24

Tables & Diagrams

DIMENSIONS: in.[mm]

SIDE VIEW

MX8Plus 高性能高圧電源 (Image 2)

TOP VIEW

MX8Plus 高性能高圧電源 (Image 3)

FRONT VIEW

MX8Plus 高性能高圧電源 (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.