SERIE XRB401

  • Fuente de alto voltaje con alimentación de filamento, tubo de rayos X, puerto de haz y electrónica de control integrados
  • Compacta y ligera
  • Entrada universal, factor de potencia corregido
  • Se puede montar en cualquier orientación física
  • Interfaz de monitoreo analógica e interfaz digital estándar RS-232

FUENTE DE RAYOS X DE 200 KV, 400 W

La serie XRB401 de fuentes de rayos X Monoblock® de Spellman está diseñada para aplicaciones de OEM en las cuales se energiza su tubo interno de rayos X con hasta 200 kV a 400 W Las funciones tales como la entrada universal el tamaño compacto, la interfaz analógica estándar y la interfaz digital RS-232, simplifican la integración de la XRB401 en su sistema de rayos X. Los modelos estándar están disponibles con geometrías de haz en forma de abanico. El circuito de control de emisión de diseño propio proporciona una regulación excelente de la corriente del tubo de rayos X, además de una sobresaliente estabilidad y desempeño.

Aplicaciones típicas:

  • Barrido con rayos X: inspección de alimentos
  • Confirmación de nivel de llenado
  • Aplicaciones de seguridad
  • CT industrial

Especificaciones

(Ref. 128085-001 REV. G)

X-Ray Characteristics:

Tube Type:  Glass tube, Tungsten target, Be filter

Focal Spot:  0.8mm X 0.5mm (IEC336)

Beam Filter:  Glass 1.8mm, Oil 10mm, Aluminum 1mm

Beam Geometry:  Symmetrical fan 85° x 10°

Input Voltage:

90Vac-264Vac, 50/60Hz, 6A maximum

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 100kV to 200kV

X-Ray Tube Current:

0.2mA to 2mA over specified tube voltage range

X-Ray Tube Power:

400W maximum continuous

Voltage Regulation:

Line: ±0.1% for a ±10% input line change

Load: ±0.1% for a 0.5mA to 2mA load change

Voltage Accuracy:

Voltage measured across the X-Ray tube is within ±1% of the programmed value

Voltage Risetime:

<1 second from 10% to 90% of rated output 

Voltage Overshoot:

5% in less than 100ms

Voltage Ripple:

≤ 0.2% p p of rated maximum voltage

Current Regulation:

Line: ±0.1% @ 100-200kV, 0.25mA to 2mA

Load: ±0.5% @ 100-200kV, 0.25mA to 2mA

Current Accuracy:

Current measured through the X-Ray tube is within ±1% of the programmed value

Current Risetime:

<1 second from 10% to 90% of rated output 

Arc Intervention:

4 arcs in 10 seconds = shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Digital Interface:

RS-232 interface.

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.

Interlock Signals:

A hardware interlock function is provided

Operating Temperature:

0°C to +40°C

Storage Temperature:

-40°C to +70°C

Humidity:

5% to 95% relative humidity, non-condensing

Cooling:

Heat exchanger w/fan and oil pump, powered from 24Vdc, 2A power supply (customer provided). External forced air cooling if needed to keep oil temperature below 55°C

Input Line Connector:

3 pin Phoenix Contact 1829167

Analog Interface Connector:

10 pin Phoenix Contact 1755503

Digital Interface Connector:

9 pin D connector, female

Grounding Point:

M5 ground stud provided on chassis

Dimensions:

See drawing

Weight:

148.0lbs (67.0kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Not to be greater than 5uSv/hr at 5cm outside the external surface per FDA 21 CFR 1020.40 and OSHA 29 CFR 1020.96

Special Features:

Stationary or rotating CT application up to 120rpm

AC INPUT POWER 3 PIN PHOENIX CONTACT

Pin Signal Parameters
1 Line 90-264Vac
2 GND Ground
3 Neutral Neutral

DC POWER FOR HEAT DISSIPATION UNIT 4 PIN AMP 206061-1 CONNECTOR

Pin Signal Parameters
1 +24 +24Vdc
2 RTN Return
3 +24 +24Vdc
4 RTN Return

ANALOG INTERFACE— 10 PIN PHOENIX CONTACT

Pin Signal Parameters
1 X-Ray +24Vdc = enable X-Ray
2 X-Ray Return X-Ray Return
3 N/C N/C
4 kV Monitor Output 0 to 9Vdc = 0 to 100% Rated Voltage
5 SGND Signal Ground
6 mA Monitor Output 0 to 9Vdc = 0 to 100% Rated Current
7 Fault Open Collector, Open = No Fault
8 Relay N/C HV On, 50V @ 1A maximum
9 Relay Common HV On, 50V @ 1A maximum
10 Relay N/O HV On, 50V @ 1A maximum

RS-232 DIGITAL INTERFACE— 9 PIN FEMALE D CONNECTOR

Pin Signal Parameters
1 N/C No Connection
2 Transmit Data Conforms to E/A RS-232-C
3 Receive Data Conforms to E/A RS-232-C
4 N/C No Connection
5 SGND Signal Ground
6 N/C No Connection
7 N/C No Connection
8 N/C No Connection
9 N/C No Connection

Tablas y Diagramas

DIMENSIONS: in.[mm]

FRONT VIEW

XRB401 X-Ray Generator (Image 2)

BACK VIEW

XRB401 X-Ray Generator (Image 3)

TOP VIEW

XRB401 X-Ray Generator (Image 4)

SIDE VIEW

XRB401 X-Ray Generator (Image 5)