SERIE XRB301

  • Fuente de alto voltaje con alimentación de filamento, tubo de rayos X, puerto de haz y electrónica de control integrados
  • Compacta y ligera
  • Se puede montar en cualquier orientación física
  • Interfaz digital estándar RS-232

FUENTE DE RAYOS X DE 160 KV, 320 W

La serie XRB0301 de fuentes de rayos X Monoblock® de Spellman está diseñada para aplicaciones de OEM en las cuales se energiza su tubo interno de rayos X con hasta 160 kV a 320 W Las funciones tales como el tamaño compacto y la interfaz digital RS-422 (RS-232 opcional), simplifican la integración de la XRB301 en su sistema de rayos X. Los modelos estándar están disponibles con geometría de haz en forma de abanico. El circuito de control de emisión de diseño propio proporciona una regulación excelente de la corriente del tubo de rayos X, además de una sobresaliente estabilidad y desempeño.

Aplicaciones típicas:

  • Barrido con rayos X: inspección de alimentos
  • Confirmación de nivel de llenado
  • Aplicaciones de seguridad

CE Marking

Especificaciones

(Ref. 128083-001 REV. H)

X-Ray Characteristics:

Tube Type:  Glass tube, Tungsten target, Be filter

Focal Spot:  1.1mm x 0.5mm

Beam Filter:  1.5mm of glass, 1mm of Al, and 10mm of oil

Beam Geometry:  Symmetrical fan 105° x 4°, 80° x 10°, cone up to 40°

Input Voltage:

230Vac, ±15% 50/60Hz, 2.2A max or 350Vdc ±10%

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 80kV to 160kV

X-Ray Tube Current:

0.5mA to 3mA over specified tube voltage range

X-Ray Tube Power:

320W continuous, 480W peak

Voltage Regulation:

Line: ±0.1% for a ±10% input line change of nominal input line voltage

Load: ±0.1% for a 0.5mA to 3mA load change

Voltage Accuracy:

Voltage measured across the X-Ray tube is within ±0.5% of the programmed value

Voltage Risetime:

Ramp time shall be <500ms from 1% to 99% of rated output 

Voltage Overshoot:

Within 5% of rated voltage

Voltage Ripple:

0.5% p p of rated voltage @ =1kHz

Current Regulation:

Line: ±0.5%

Load: ±0.5%

Current Accuracy:

Current measured through the X-Ray tube is within ±0.5% of the programmed value

Current Risetime:

<500ms from 1% to 99% of rated output 

Arc Intervention:

4 arcs in 10 seconds = Shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Digital Interface:

RS-422 interface, RS-232 optional

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-422 (RS-232 optional) digital interface upon request.

Interlock Signals:

A hardware interlock functions in digital programming modes.

Operating Temperature:

5°C to +40°C

Storage Temperature:

-25°C to +65°C

Humidity:

5% to 90% relative humidity, non-condensing

Cooling:

Heat exchanger w/fan and oil pump, powered from AC

Input Line Connector:

10 pin Molex 39-29-9103

Digital Interface Connector:

9 pin D, female

Grounding Point:

8-32 ground stud provided on chassis

Dimensions:

22.12˝ X 14.30˝ X 6.50˝ 561.85mm X 363.22mm X 165.1mm

Weight:

110lbs (49.5kg) ±10lbs (±4.5kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Not to be greater than 0.5mR/hr at 5cm outside the external surface per FDA 21 CFR 1020.40 and OSHA 29 CFR 1020.96

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. UL/CUL recognized file E235530.

Special Features:

Stationary or rotating CT application up to 100rpm

AC INPUT POWER J1 10 PIN MOLEX CONNECTOR

Pin Signal Parameters
1 Neutral 350Vdc RTN/230Vac Neutral
2 N/C No Connection
3 GND Chassis Ground
4 GND Chassis Ground
5 Line +350Vdc/230Vac Line
6 Neutral 350Vdc RTN/230Vac Neutral
7 N/C No Connection
8 N/C No Connection
9 N/C No Connection
10 Line +350Vdc/230Vac Line

RS-422 DIGITAL INTERFACE J2 9 PIN FEMALE D CONNECTOR

Pin Signal Parameters
1 TX+ RS422 Transmit +
2 TX TXRS422 Transmit -
3 RX+ RS422 Receive +
4 RX RXRS422 Receive -
5 GND Chassis Ground
6 X-Ray On Ind L = X-Ray OFF, H= X-Ray ON
7 Intlck Out Connect to Pin 9
8 N/C No Connection
9 Intlck In Connect to Pin 7

Tablas y Diagramas

DIMENSIONS: in.[mm]

FRONT VIEW

XRB301 X-Ray Generator (Image 2)

BACK

XRB301 X-Ray Generator (Image 3)

TOP VIEW

XRB301 X-Ray Generator (Image 4)

SIDE VIEW

XRB301 X-Ray Generator (Image 5)