SERIE PCM

  • Voltaje de salida de 1 kV a 70 kV
  • Baja energía almacenada
  • Reconocimiento UL y cumplimiento CE
  • Personalización disponible para OEM
Two Year Extended Warranty & RoHS Compliant Logos

FUENTES DE ALIMENTACIÓN DE ALTO VOLTAJE DE 120 W

La serie PCM de módulos de alimentación de alto voltaje de 120 W con entrada de CA de Spellman incorpora un extremo frontal con factor de potencia corregido, proporcionando 0.99 de factor de potencia además de una capacidad de voltaje de entrada universal (85 VCA a 265 VCA). Estos módulos de polaridad fija (que se especifican como positivos o negativos al momento de ordenarlos) cuentan con regulación de voltaje y corriente con cruce automático, haciéndolos ideales para aplicaciones de cargas sensibles. El diseño robusto de la serie PCM y su amplia protección contra arco y cortocircuito le permiten la operación en los ambientes más demandantes.

Aplicaciones típicas:

  • Electrohilado
  • Pruebas de potencial alto
  • Arreglos de detectores
  • Electroforesis
  • Prueba de cables

CE, ROHS, UL Marking

Especificaciones

(Ref. 128006-001 REV. M)

Input:

85-265Vac, 47-63Hz, power factor corrected.

UL® rated for 85-250Vac input for 1kV to 5kV models.

Power Factor (Typical):

FL: 0.99

NL: 0.98

Efficiency:

80 to 85%, typical

Output:

11 models from 1kV to 70kV. Positive or negative polarity outputs, specify at time of order.

Voltage Regulation:

Load: 0.01% of output voltage, no load to full load.

Line: ±0.01% for ±10% change in input voltage.

Current Regulation:

Load: 0.01% of output current from 0 to rated voltage. Line: 0.01% of rated current over specified input range.

Ripple:

0.1% p-p of maximum output voltage.

Voltage Stability:

0.02% per 8 hours.

Temperature Coefficient:

100ppm per °C, voltage or current regulated.

Environmental:

Operational: 0 to 40°C

Storage: -40°C to +85°C

Humidity: 0 to 90%, non-condensing 

Dimensions:

1kV to 50kV: 3.65”H x 5”W x 9”D (9.27cm x 12.7cm x 22.9cm). 

60, 70kV: 3.65”H x 5”W x 11”D (9.27cm x 12.7cm x 27.9cm).

Weight:

7 pounds (3.18kg)

AC Input Connectors:

IEC320 with mating cable.

Interface Connector:

15 pin D connector.

HV Output Cable:

Spellman Delrin type connector with 36” (91.4cm) shielded cable.

Front Panel Ground Connection:

Threaded 8-32 ground stud

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. UL/CUL recognized, File E148969 (up to 60kV only)

PCM SELECTION TABLE

Maximum Rating Model Number  
kV mA  
1 120 PCM 1*120
3 40 PCM 3*120
5 24 PCM 5*120
10 12 PCM 10*120
15 8 PCM 15*120
20 6 PCM 20*120
30 4 PCM 30*120
40 3 PCM 40*120
50 2.4 PCM 50*120
60 2.0 PCM 60*120
70 1.7 PCM 70*120

 *Specify “P” for positive polarity or “N” for negative polarity.

PCM D CONNECTOR 15 PIN

Pin Signal Parameters
1 Remote mA Program 0 to 10Vdc = 0 to 100% of rated output
2 Remote kV Program 0 to 10Vdc = 0 to 100% of rated output
3 High Voltage Enable/Inhibit Open = HV Inhibit, Ground = HV ON
4 mA Monitor 0 to 10Vdc = 0 to 100% of rated output
5 Interlock Return Connect to pin 6 to close interlock circuit
6 Interlock Out Connect to pin 5 to close interlock circuit
7 kV Monitor 0 to 10Vdc = 0 to 100% of rated output
8 Local kV Program Multi-turn front panel pot (screwdriver)
9 Power Supply Fault 0Vdc = No Fault, +15Vdc @ 1mA = Fault
10 +10Vdc Reference +10Vdc @ 1mA maximum
11 Signal Ground Signal Ground
12 Spare No Connection
13 Spare No Connection
14 Spare No Connection
15 Local mA Program Multi-turn front panel pot (screwdriver)

Tablas y Diagramas

DIMENSIONS: in.[mm]

SIDE VIEW

PCM High Voltage Power Supply (Image 2)

TOP VIEW

 PCM Series Top View

BACK VIEW

PCM High Voltage Power Supply (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.