Series PFE - HV
- 6, 9, 12, 15, 18kV Versions Available
- Full Array of Dry Contact Closures for Remote Station Alarm Monitoring
- Fully-Programmable Electronic Test Load Bay Capable of Dissipating 22.5kW
- Electroding Functions Provided
- 3-Bay Design. Rear Doors Provided for Safety Interlocking
- Built-in Data Logger Functions Capture Data Every 10ms
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
High Voltage Power Feed Equipment (PFE)
Spellman High Voltage Electronics, the leading independent supplier of Power Feed Equipment to the Telecom industry, has developed a new generation of High Voltage Power Feed Equipment, (PFE-HV). This PFE-HV is targeted at the emerging requirements for longer submarine cable installations, while addressing underlying issues such as lower cost, smaller foot print, and easier operation.
Key features:
- Redundancy is provided for the converters (n+1)
- Simplified sliding drawers for PFE open, grounding, test modes
- Redundancy is provided for the LCU. In case of failure of LCU, the PFE will continue to operate normally
- LCU contains pull-out 17˝ LCD screen, keyboard, mouse pad and CPU
- Simplified keylock scheme ensures safety of operating personnel
- Highly visible Vacuum Fluorescent Display (VFD) on the output module (OMU) and each converter displays voltage, current and modes of operation
- Unique protective “trap door” barrier allows a converter to be replaced safely while the PFE is still powering the cable
(Ref. 128119-001 REV. B)
Output Voltage:
18kV maximum rated continuous operation, up to 15kV nominal
Output Current:
1.8A maximum rated continuous operation, 1.5A nominal
Output Power:
Up to 22.5kW for n+1 redundancy
Input Voltage:
-40.5Vdc to -60Vdc
Programming:
Full-featured programming, monitoring, alarms, diagnostics, and ramping functions provided via LCU module.
Monitoring:
Full local and remote monitoring via Ethernet connection.
Current Ripple:
10mA peak to peak of maximum output
Voltage Ripple:
0.2% peak to peak of maximum output
Current Stability:
0.1% (constant load) after a 4 hour warm up
Operating Temperature:
5 to 40°C operating
Storage Temperature:
-40 to +85°C storage
Humidity:
5% to 85%, non-condensing
Cooling:
Forced Air
Dimensions: (per bay)
86.68”H x 23.64”W x 23.64”D (2200mm x 600mm x 600mm)
Weight: (per bay)
900 pounds (335.9kg)
Regulatory Approvals:
Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. GR-63-CORE, GR-189-CORE, ETSI ETS 300 019, ETS 300 118, ETS 300 127, ETSI EN 300 132-2, ETSI EN 300 386, EN 60950. Safety IEC 60950-1 E148969- (A5) (X4146, X4147, X4148, X4149, X4750)
DIMENSIONS: in.[mm]
