SpellmanHV MX10Plus High Performance High Voltage Power Supply

MX10Plus

  • ±10kV with 25mS Polarity Reversing Speed
  • Integrated Electron Multiplier Supply
  • Precision Analog Voltage Control
  • High Stability, Low Ripple and Noise
  • RoHS Compliant

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

 CE ROHS Marking

High Performance High Voltage Power Supply

Spellman’s RoHS compliant MX10 Plus is a well-regulated high performance fast reversible dynode supply featuring a 25ms “hot switchable” polarity reversing capability with an integrated -2.3kV electron multiplier supply.

The MX10 Plus’s low ripple specification is typical of the topologies that make Spellman High Voltage your ideal choice for mass spectrometry applications; especially security detection systems, dynodes, sample ionisation as well as capillary electrophoresis and electrostatic printing applications. The MX10 Plus has been designed espe­cially for dynode detector applications.

The MX10 Plus can be easily tailored to an OEM’s requirement, such as improved ripple performance, or different voltage and/or current capabilities.

Typical applications:

  • Dynode Supply
  • Electron Multiplier Supply

Specifications

(Ref. 128066-001 REV. H)

Input Voltage:

+15Vdc, ±.75Vdc

Input Current:

≤500mA nominal continuous

<2A during reversing 

Temperature Coefficient:

 100ppm per degree C

Environmental:

Temperature Range:

Operating: 5°C to 45°C

Storage: -35°C to 85°C

Humidity:

10% to 85%, non-condensing

Stability:

(constant operating conditions) ≤ 300ppm per hour after 1 hour warm up

Protection:

Arc and Short circuit protected

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive.

DYNODE SPECIFICATIONS

Output Voltage:

±10kV

Output Current:

10µA

Output Polarity:

Remotely reversible via TTL logic signal

Switching Speed:

25ms to settle 90% into 50pF load

Voltage Regulation:

Line: ≤ 0.02% for a 1.5V input voltage change

Ripple:

≤ 10 Volts p-p

ELECTRON MULTIPLIER SPECIFICATIONS

Output Voltage:

Fixed: -2.3kV

Output Polarity:

Negative

Output Current:

≤ 230µA

Voltage Regulation:

Line: ≤0.02% for a 1.5V input voltage change

Load: <5V for for no load to 22M Ohms load change

Ripple:

≤ 200mV p-p @ 2.3kV into 22M Ohm load

Output Rise Time:

10ms

Output Fall Time:

10ms

Dimensions:

2.00. H X 5.30. W X 8.00. D (50.8mm X 134.6mm X 203mm)

Weight:

Approximately 3.3 pounds (1.5kg)

Interface/Power Connector:

20 pin flat ribbon connector

Output Connector:

±10kV: modified Alden #A200 connector

-2.3kV: MHV Kings bulkhead KV-79-15 or similar

MX10 PLUS TERMINAL BLOCK 20 PINS

Pin Signal
1 +15Vdc Input
2 +15Vdc Input
3 N/C
4 N/C
5 Ground
6 Ground
7 Output Voltage Control
8 Signal Reference Ground
9 10kV On
10 10kV On
11 Output Polarity Control
12 EM Protect
13 -2.3kV Output Monitor
14 EM On
15 Ground
16 Ground
17 ±10kV Output Monitor
18 N/C
19 +15Vdc Input
20 +15Vdc Input
How to Order:
Standard: PART NO.:MXP10PN15

Tables & Diagrams

DIMENSIONS: in.[mm]

SIDE VIEW

MX10Plus High Voltage Power Supply (Image 1)

TOP VIEW

MX10Plus High Voltage Power Supply (Image 2)

FRONT VIEW

MX10Plus High Voltage Power Supply (Image 4)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.