210 Series

  • Standard Rack Mounted Design
  • Low Ripple and Noise
  • Reversible Output Polarity

Two Year Extended Warranty

120-225W High Voltage Power Supplies

Spellman’s Bertan brand of 210 Series of 125 to 225W high voltage power supplies provide regulated high voltage outputs from 1 to 50kV. The low noise, linear topology employed results in extremely low output ripple specifica­tions. Units are inherently reversible by design, providing either positive or negative output polarity. The 210 is fully arc and short circuit protected. Excellent regulation specifications are featured along with outstanding stability performance.

Typical applications:

  • HiPot Testing
  • CRT Testing
  • Electrostatics
  • E Beam Systems
  • General Laboratory Usage

CE Marking

Specifications

(Ref. 128050-001 REV. H)

Input Voltage:

115Vac, ±10%, 50/60Hz @ 5A 
230Vac, ±10%, 50/60Hz @ 2.5A 
Input voltage is switch selectable

Output Voltage:

See “model selection” table

Output Polarity:

1kV to 50kV units are inherently reversible by design

Output Current:

 See “model selection” table

 Voltage Regulation:

Line: ≤ 0.001% of rated output voltage over specified input voltage range

Load:≤ 0.005% of rated output voltage for a full load change

 Current Regulation:

 Internally set to limit at 105% of rated current at full output voltage. Maximum output current at any other voltage setting must be derated linearly down to 30% of maximum at zero output voltage 

Ripple: 

See “model selection” table

Temperature Coefficient:

≤ 50ppm/°C

 Stability:

≤ 0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up 

Accuracy:

Voltage Monitor: ±(0.25% of reading + 0.25% of maximum)

Current Monitor: ±(0.5% of reading + 0.25% of maximum)

Remote Programming;  ±(0.25% of setting + 0.05% of maximum) for 1kV to 30kV ±(0.5% of setting + 0.25% of maximum) for 50kV

Front Panel Control:  ±(0.25% of setting + 0.05% of maximum) for 1kV to 30kV ±(0.5% of setting + 0.25% of maximum) for 50kV

Front Panel Meter: ±2% of full scale

Operating Temperature

 0°C to +50°C

 Storage Temperature:

 -40°C to +85°C

 Humidity:

 20% to 85% RH, non-condensing 

Input Line Connector:

A captive 3 conductor line cord and NEMA plug is provided

 Interface Connector:

 7 pin Amphenol 126-198, mating connecter and pins provided

 Output Connector:

 A detachable 10 foot (3 meter) long HV cable is provided

 Cooling: 

Internal fan, forced-air cooling

Dimensions

1-5kV: 19.0. W X 5.25. H X 11.0. D (483mm X 133mm X 279mm)

10-50kV:  19.0. W X 5.25. H X 16.0. D (483mm X 133mm X 406mm)

 Weight:

≤ 40lbs (18.1kg) up to and including 30kV units

≤ 50lbs (22.7kg) for 50kV unit

 Regulatory Approvals:

 Compliant to 2004/108/EC, the EMC Directive and 2006/95/EC, the Low Voltage Directive.

MODEL SELECTION TABLE

210 Series Voltage Current Ripple
210-01R 0 to 1kV 0 to 225mA 50mV
210-1.5R 0 to 1.5kV 0 to 130mA 100mV
210-02R 0 to 2kV 0 to 100mA 100mV
210-03R 0 to 3kV 0 to 75mA 100mV
210-05R 0 to 5kV 0 to 40mA 200mV
210-10R 0 to 10kV 0 to 15mA 500mV
210-20R 0 to 20kV 0 to 7mA 1V
210-30R 0 to 30kV 0 to 4.5mA 1.5V
210-50R 0 to 50kV 0 to 2.5mA 5V

INTERFACE CONNECTOR

Pin Signal Parameters
A -5Vdc Reference -5.0Vdc @ 5mA, maximum
B Voltage Program Input 0 to -5Vdc = 0 to 100% rated voltage, Zout = 10KΩ
C Analog Ground Ground
D Current Monitor 0 to 5Vdc = 0 to 100% rated current, Zout = 10KΩ
E Voltage Monitor 0 to 5Vdc = 0 to 100% rated voltage, Zout = 10KΩ
F Polarity Indicator Open collector output, ON = Positive Polarity
G N/C No Connection

Tables & Diagrams

DIMENSIONS: in.[mm]

FRONT VIEW

210 High Voltage Power Supply (Image 1)

TOP VIEW

210 High Voltage Power Supply (Image 2)

BACK VIEW

210 High Voltage Power Supply (Image 3)

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.